Short answer: the MoFi SourcePoint 10. It ranks #27 of 214 bookshelf speakers by sound quality, rated 4.4/5, at $3,795. The Arendal Sound 1610 Bookshelf 8 ranks #47, rated 4.3/5, at $3,600, $195 cheaper, which does not close the gap in sound quality.
What the MoFi SourcePoint 10 does well: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing: a genuine “point source” design. Watch for: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ.
The Arendal Sound 1610 Bookshelf 8 is the deeper-bass choice. The standmount of Arendal’s 2026 1610 series: a 3-way with a 28mm tweeter, a 5” midrange and an 8” woofer (crossovers at 330Hz and 2.3kHz). Its bass reaches about 27Hz before falling 10dB, against 38Hz for the MoFi SourcePoint 10. The catch: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from Arendal’s published measurements of the 1610 Tower 8.
Buy the MoFi SourcePoint 10. It is rated higher for sound quality, and saving $195 with the Arendal Sound 1610 Bookshelf 8 does not make up for the sound-quality gap.
About the ratings: the Arendal Sound 1610 Bookshelf 8’s rating is estimated from measured siblings and predecessors rather than its own measurements, with a likely range of 4.0 to 4.5, so this verdict could change once it is measured.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| MoFi SourcePoint 10 | Arendal Sound 1610 Bookshelf 8 | |
|---|---|---|
| Price | $3795 per pair | $3,600 per pair |
| Ranked | #27 of 214 in Large Size Bookshelf Speakers | #47 of 214 in Large Size Bookshelf Speakers Estimated |
| Bass Extension (-10dB) | 38Hz (measured, Erin’s Audio Corner) | 27Hz (manufacturer specified) |
| Bass Extension (-3dB) | 56Hz (measured, Erin’s Audio Corner) | 43Hz (manufacturer specified) |
| Dimensions | 22.5”H x 14.5”W x 16.6”D (571.5 x 368.3 x 421.6 mm) | 18.8”H x 10.4”W x 11.8”D (477 x 265 x 300 mm) |
| Impedance | 8 ohms nominal, 6.4 ohms minimum (measured, Erin’s Audio Corner) | 4 ohms nominal (manufacturer specified) |
| Sensitivity | 88.2dB (measured, Erin’s Audio Corner) | 85dB (2.83V/1m, manufacturer specified) |
| Drivers | 10” Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter | 28mm tweeter, 5” midrange, 8” woofer |
| Weight | 46.3 lbs (21.0 kg) each | 35.7 lbs (16.2 kg) each |
| Woofer Cabinet | ported, rear | ported (port plug included) |
| Spinorama Preference Score | 4.16 | - |
| Spinorama Preference Score with Perfect Sub | 6.17 | - |
| DIY Kit | No | No |
| Frequency Response | - | 34Hz - 20kHz -6dB anechoic (manufacturer specified) |
| Crossover Frequency | - | 330Hz, 2.3kHz |
Related Speaker Comparisons
More worthwhile head-to-heads for MoFi SourcePoint 10:
- MoFi SourcePoint 10 vs Perlisten S4b
- KEF Reference 1 Meta vs MoFi SourcePoint 10
- GR-Research NX-Studio vs MoFi SourcePoint 10
- AsciLab C6B vs MoFi SourcePoint 10
- Audio First Cadentia 3 vs MoFi SourcePoint 10
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
MoFi SourcePoint 10: $3795 per pair Crutchfield eBay
Newer model: the MoFi SourcePoint 10 Master Edition, ranked lower, rated 3.8/5, released Jul 2025. See every MoFi SourcePoint generation.
Same family: the MoFi SourcePoint 8 (smaller bookshelf, ranked higher, rated 4.5/5) and the MoFi SourcePoint 888 (floorstanding, rated 4.7/5).
Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing: a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low: under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region: there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
Full MoFi SourcePoint 10 review and specifications →
| Released | Nov 2022 (3 years ago) |
|---|---|
| Bass Extension (-10dB) | 38Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 56Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 22.5”H x 14.5”W x 16.6”D (571.5 x 368.3 x 421.6 mm) |
| Drivers | 10” Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal, 6.4 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 4.16 |
| Spinorama Preference Score with Perfect Sub | 6.17 |
| Weight | 46.3 lbs (21.0 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- MoFi SourcePoint 10 vs Radiant Acoustics Clarity 6.2
- MoFi SourcePoint 10 vs Wharfedale Super Linton
- MoFi SourcePoint 10 vs Dynaudio Heritage Special
- MoFi SourcePoint 10 vs Ascend Acoustics CMT-340 SE2
- MoFi SourcePoint 10 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 10 vs AsciLab F6Bs
- MoFi SourcePoint 10 vs Wharfedale Linton 85
- MoFi SourcePoint 10 vs MoFi SourcePoint 8
- See all 51 comparisons
Arendal Sound 1610 Bookshelf 8: $3,600 per pair Estimated Arendal Sound eBay
Same family: the Arendal Sound 1610 Tower 8 (floorstanding, rated 4.4/5) and the Arendal Sound 1610 Center 8 (center, estimated 4.1/5).
Pros: The standmount of Arendal’s 2026 1610 series: a 3-way with a 28mm tweeter, a 5” midrange and an 8” woofer (crossovers at 330Hz and 2.3kHz). Arendal’s own Spinorama data for the 1610 Tower 8 scored 7.03, one of the highest preference scores published, and the bookshelf reaches 34Hz (-6dB). It can run ported or sealed.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from Arendal’s published measurements of the 1610 Tower 8. Sensitivity is 85dB into 4 ohms and it weighs 16.2kg.
Full Arendal Sound 1610 Bookshelf 8 review and specifications →
| Released | Mar 2026 (7 months ago) |
|---|---|
| Bass Extension (-10dB) | 27Hz (manufacturer specified) |
| Bass Extension (-3dB) | 43Hz (manufacturer specified) |
| Crossover Frequency | 330Hz, 2.3kHz |
| DIY Kit | No |
| Dimensions | 18.8”H x 10.4”W x 11.8”D (477 x 265 x 300 mm) |
| Drivers | 28mm tweeter, 5” midrange, 8” woofer |
| Frequency Response | 34Hz - 20kHz -6dB anechoic (manufacturer specified) |
| Impedance | 4 ohms nominal (manufacturer specified) |
| Sensitivity | 85dB (2.83V/1m, manufacturer specified) |
| Weight | 35.7 lbs (16.2 kg) each |
| Woofer Cabinet | ported (port plug included) |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons