LD Systems Stinger 28-A-G3 vs Electro-Voice EVC-1082

Last updated: October 11, 2026

Short answer: the LD Systems Stinger 28-A-G3. It ranks #21 of 44 8-inch pa speakers by sound quality, rated 3.5/5, at $799; the Electro-Voice EVC-1082 ranks #27, rated 3.4/5, and costs $1,074.95, so there is not much of a tradeoff to weigh.

LD Systems Stinger 28-A-G3 vs Electro-Voice EVC-1082

The LD Systems Stinger 28-A-G3 is the deeper-bass option. Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. Its bass reaches about 56Hz before falling 3dB, against 67Hz for the Electro-Voice EVC-1082. The catch: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96.

What the Electro-Voice EVC-1082 does well: Vendor measurements give preference scores of 2.27 standalone and 5.02 with an ideal subwoofer, the best of the EVC models here, and bass reaches 67Hz (-3dB) and about 56Hz (-10dB), deep for an 8-inch cabinet. The catch: The listening window spreads across a 4.2dB band, so the tonal balance changes off axis.

Buy the LD Systems Stinger 28-A-G3. It is rated higher for sound quality than the Electro-Voice EVC-1082 and costs less, so only choose the other one for a particular feature it does better.

Still deciding? The full PA & Live Sound rankings cover every ranked option.

Specifications Side By Side

LD Systems Stinger 28-A-G3 Electro-Voice EVC-1082
Price$799$1,074.95 Passive
Ranked#21 of 44 in 8-Inch PA Speakers#27 of 44 in 8-Inch PA Speakers
RiggingM10 rigging points; 36mm dual-tilt pole mount8 x M10 flying points; optional U-bracket or wall mount
Weight45.2 lbs (20.5 kg)24.7 lbs (11.2 kg)
PassiveNoYes
ConfigurationActive 2-way bass-reflex PA speakerPassive 2-way installation PA speaker
Drivers2x 8” woofers, BMS compression driver8” EVS-2008 woofer, 1.25” titanium compression driver on a rotatable waveguide
Frequency Response58Hz - 20kHz (manufacturer specified)75Hz - 21kHz (manufacturer specified)
Amplifier Power500W RMS / 1,000W peak, Class-DPassive speaker; requires external amplification
Maximum SPL131dB (manufacturer specified)120dB (manufacturer calculated)
Coverage90° x 50°90° x 60° (rotatable)
Cabinet MaterialBirch plywood with polyurea coating-
DSPYes, DynX DSP presetsNo (passive)
BluetoothNoNo
XLR InputYesNo
RCA InputNoNo
TRS InputYesNo
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputNoNo
Guitar InputNoNo
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)67Hz (measured, vendor Spinorama data)
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)about 55.7Hz (measured, vendor Spinorama data)
Spinorama Preference Score1.962.27
Spinorama Preference Score with Perfect Sub4.445.02
Power Handling-200W continuous
Sensitivity-91dB
Impedance-8 ohms

Frequency Response Compared

Both speakers’ spinorama measurements, overlaid. A flatter line is more neutral: peaks sound forward or harsh, dips sound recessed. Each curve is shifted so its average from 300 Hz to 3 kHz sits at 0 dB, so loudness differences between the two are removed and only the shape is compared.

Listening window: the sound arriving straight at you, averaged over a small window around the listening position.
LD Systems Stinger 28-A-G3Electro-Voice EVC-1082
Listening window of the LD Systems Stinger 28-A-G3 and Electro-Voice EVC-1082-24-18-12-60+6dB20501002005001k2k5k10k20k
Estimated in-room response: what a typical room adds: reflections from walls and the floor make it tilt down toward the treble, and a gentle, even tilt is ideal.
LD Systems Stinger 28-A-G3Electro-Voice EVC-1082
Estimated in-room response of the LD Systems Stinger 28-A-G3 and Electro-Voice EVC-1082-24-18-12-60+6dB20501002005001k2k5k10k20k

Measurement data: LD Systems Stinger 28-A-G3 (measured by the manufacturer) and Electro-Voice EVC-1082 (measured by the manufacturer), via spinorama.org.

More top alternatives to LD Systems Stinger 28-A-G3:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

LD Systems Stinger 28-A-G3: $799 Thomann eBay

LD Systems Stinger 28-A-G3 ranking card

Same family: the LD Systems Stinger 8-A-G3 (smaller model, ranked higher, rated 3.7/5), the LD Systems Stinger 10-A-G3 (larger model, rated 4.1/5), the LD Systems Stinger 12 A G3 (larger model, rated 3.5/5) and the LD Systems Stinger 15-A-G3 (larger model, rated 3.4/5).

Pros: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The birch plywood cabinet has a polyurea coating and steel grille, and DynX DSP presets let it work as a full-range top, satellite or monitor. Measured bass extension of 56Hz (-3dB).

Cons: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96. The single-8-inch LD Systems Stinger 8-A-G3 measures better for the money.

AES InputNo
Amplifier Power500W RMS / 1,000W peak, Class-D
Aux InputNo
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialBirch plywood with polyurea coating
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
DSPYes, DynX DSP presets
Drivers2x 8” woofers, BMS compression driver
Frequency Response58Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL131dB (manufacturer specified)
Microphone InputNo
Optical InputNo
PassiveNo
RCA InputNo
RiggingM10 rigging points; 36mm dual-tilt pole mount
Spinorama Preference Score1.96
Spinorama Preference Score with Perfect Sub4.44
TRS InputYes
USB InputNo
Weight45.2 lbs (20.5 kg)
XLR InputYes

Electro-Voice EVC-1082: $1,074.95 Passive B&H eBay

Electro-Voice EVC-1082 ranking card

Same family: the Electro-Voice EVC-1122 (larger model, rated 3.2/5) and the Electro-Voice EVC-1152 (larger model, rated 3.3/5).

Pros: Vendor measurements give preference scores of 2.27 standalone and 5.02 with an ideal subwoofer, the best of the EVC models here, and bass reaches 67Hz (-3dB) and about 56Hz (-10dB), deep for an 8-inch cabinet. The rotatable waveguide lets it mount vertically or horizontally. Measured bass extension of 67Hz (-3dB).

Cons: The listening window spreads across a 4.2dB band, so the tonal balance changes off axis. Sensitivity is a modest 91dB with a 120dB maximum, and it is passive, so it needs an amplifier.

AES InputNo
Amplifier PowerPassive speaker; requires external amplification
Aux InputNo
Bass Extension (-10dB)about 55.7Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)67Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationPassive 2-way installation PA speaker
Coverage90° x 60° (rotatable)
DSPNo (passive)
Drivers8” EVS-2008 woofer, 1.25” titanium compression driver on a rotatable waveguide
Frequency Response75Hz - 21kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Impedance8 ohms
Maximum SPL120dB (manufacturer calculated)
Microphone InputNo
Optical InputNo
PassiveYes
Power Handling200W continuous
RCA InputNo
Rigging8 x M10 flying points; optional U-bracket or wall mount
Sensitivity91dB
Spinorama Preference Score2.27
Spinorama Preference Score with Perfect Sub5.02
TRS InputNo
USB InputNo
Weight24.7 lbs (11.2 kg)
XLR InputNo