LD Systems Stinger 28-A-G3 vs RCF ART 708-A MK5

Last updated: September 26, 2026

Short answer: the LD Systems Stinger 28-A-G3. It ranks #17 of 22 8-inch pa speakers by sound quality, rated 3.5/5, at $799. The RCF ART 708-A MK5 ranks #19, rated 3.4/5, at $499, $300 cheaper, not enough of a saving to outweigh the sound-quality gap.

LD Systems Stinger 28-A-G3 vs RCF ART 708-A MK5

The case for the LD Systems Stinger 28-A-G3: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The catch: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96.

Why pick the RCF ART 708-A MK5: A compact, affordable RCF with a 1.4-inch compression driver, 128dB claimed output and FiRPHASE processing, well suited to buyers who plan to cross to a subwoofer and do not need app control. Watch for: The local low-quality manufacturer data has no computed preference score, making its measured tonal position uncertain.

Buy the LD Systems Stinger 28-A-G3. It is rated higher for sound quality, and the $300 you would save on the RCF ART 708-A MK5 does not close the gap.

Want more options? Browse the full PA & Live Sound rankings.

Specifications Side By Side

LD Systems Stinger 28-A-G3 RCF ART 708-A MK5
Price$799$499.00
Ranked#17 of 22 in 8-Inch PA Speakers#19 of 22 in 8-Inch PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers2x 8” woofers, BMS compression driver8” woofer, 1.4” compression driver
Frequency Response58Hz - 20kHz (manufacturer specified)60Hz - 20kHz (manufacturer specified)
Amplifier Power500W RMS / 1,000W peak, Class-D1400W peak (1000W LF + 400W HF)
Maximum SPL131dB (manufacturer specified)128dB peak (manufacturer specified)
Coverage90° x 50°90° x 70°
Cabinet MaterialBirch plywood with polyurea coatingPP composite
DSPYes, DynX DSP presetsYes, FiRPHASE, EQ, limiting and protection
BluetoothNoNo
XLR InputYesYes
RCA InputNoNo
TRS InputYesYes
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputNoNo
Guitar InputNoNo
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)75Hz (measured, vendor Spinorama data)
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)-
Spinorama Preference Score1.96-
Spinorama Preference Score with Perfect Sub4.44-
Dimensions-18.9”H x 11.5”W x 10.9”D (480 x 291 x 276 mm)
Inputs-XLR and 1/4-inch jack input; XLR output
Crossover Frequency-1600Hz
Rigging-2 x M10 inserts; 35mm pole mount
Weight-22.9 lbs (10.4 kg)

How LD Systems Stinger 28-A-G3 compares with other leading options:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

LD Systems Stinger 28-A-G3: $799 Thomann eBay

LD Systems Stinger 28-A-G3 ranking card

Pros: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The birch plywood cabinet has a polyurea coating and steel grille, and DynX DSP presets let it work as a full-range top, satellite or monitor. Measured bass extension of 56Hz (-3dB).

Cons: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96. The single-8-inch Stinger 8 A G3 measures better for the money.

AES InputNo
Amplifier Power500W RMS / 1,000W peak, Class-D
Aux InputNo
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialBirch plywood with polyurea coating
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
DSPYes, DynX DSP presets
Drivers2x 8” woofers, BMS compression driver
Frequency Response58Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL131dB (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Spinorama Preference Score1.96
Spinorama Preference Score with Perfect Sub4.44
TRS InputYes
USB InputNo
XLR InputYes

RCF ART 708-A MK5: $499.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 708-A MK5 ranking card

Older model: the RCF ART 708-A MK4 (rated 3/5).

Pros: A compact, affordable RCF with a 1.4-inch compression driver, 128dB claimed output and FiRPHASE processing, well suited to buyers who plan to cross to a subwoofer and do not need app control. At 10.4kg it is easy to carry. Measured bass extension of 75Hz (-3dB).

Cons: The local low-quality manufacturer data has no computed preference score, making its measured tonal position uncertain.

AES InputNo
Amplifier Power1400W peak (1000W LF + 400W HF)
Aux InputNo
Bass Extension (-3dB)75Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 70°
Crossover Frequency1600Hz
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions18.9”H x 11.5”W x 10.9”D (480 x 291 x 276 mm)
Drivers8” woofer, 1.4” compression driver
Frequency Response60Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL128dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Rigging2 x M10 inserts; 35mm pole mount
TRS InputYes
USB InputNo
Weight22.9 lbs (10.4 kg)
XLR InputYes