Seeburg X2 vs LD Systems Stinger 28-A-G3

Last updated: September 26, 2026

Short answer: the Seeburg X2. It ranks #15 of 22 8-inch pa speakers by sound quality, rated 3.6/5, at $1,059. The LD Systems Stinger 28-A-G3 ranks #17, rated 3.5/5, at $799, $260 cheaper, which does not close the gap in sound quality.

Seeburg X2 vs LD Systems Stinger 28-A-G3

The case for the Seeburg X2: The 8kg coaxial cabinet has a rotatable 90° x 60° horn, M10 rigging points and a pole flange. Watch for: Bass reaches only about 90Hz (-3dB), and listening-window narrow-band deviation is 0.466, so it needs a subwoofer and sounds uneven in the midrange.

What the LD Systems Stinger 28-A-G3 does well: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. Watch for: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96.

Buy the Seeburg X2. It is rated higher for sound quality, and the $260 saving on the LD Systems Stinger 28-A-G3 is not enough to make up the difference.

Want more options? Browse the full PA & Live Sound rankings.

Specifications Side By Side

Seeburg X2 LD Systems Stinger 28-A-G3
Price$1,059.00$799
Ranked#15 of 22 in 8-Inch PA Speakers#17 of 22 in 8-Inch PA Speakers
ConfigurationPassive 2-way coaxial PA speakerActive 2-way bass-reflex PA speaker
Drivers8” neodymium woofer, 1” neodymium compression driver (coaxial)2x 8” woofers, BMS compression driver
Frequency Response70Hz - 19kHz (-6dB, manufacturer specified)58Hz - 20kHz (manufacturer specified)
Dimensions14.8”H x 9.8”W x 9.8”D (375 x 250 x 250 mm)-
Amplifier PowerPassive speaker; requires external amplification within the 250W AES / 750W peak handling rating500W RMS / 1,000W peak, Class-D
InputsTwo Speakon NL4 connectors-
Power Handling250W AES / 750W peak (manufacturer specified)-
Maximum SPL124dB (manufacturer specified)131dB (manufacturer specified)
Coverage90° x 60° (rotatable horn)90° x 50°
DSPNo (passive)Yes, DynX DSP presets
RiggingM10 rigging points, 35mm stand flange-
Weight17.6 lbs (8.0 kg)-
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)56Hz (measured, vendor Spinorama data)
BluetoothNoNo
Spinorama Preference Score3.391.96
Spinorama Preference Score with Perfect Sub6.644.44
XLR InputNoYes
RCA InputNoNo
TRS InputNoYes
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputNoNo
Guitar InputNoNo
Cabinet Material-Birch plywood with polyurea coating
Bass Extension (-10dB)-about 49.6Hz (measured, vendor Spinorama data)

More top alternatives to Seeburg X2:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Seeburg X2: $1,059.00 Passive Thomann eBay

Seeburg X2 ranking card

Pros: The 8kg coaxial cabinet has a rotatable 90° x 60° horn, M10 rigging points and a pole flange. Vendor Spinorama data gives preference scores of 3.39 standalone and 6.64 with an ideal subwoofer, with predicted in-room smoothness of 0.645. Measured bass extension of 90Hz (-3dB).

Cons: Bass reaches only about 90Hz (-3dB), and listening-window narrow-band deviation is 0.466, so it needs a subwoofer and sounds uneven in the midrange. It is passive, needs an external amplifier, and costs more than powered 8-inch competitors that measure similarly.

AES InputNo
Amplifier PowerPassive speaker; requires external amplification within the 250W AES / 750W peak handling rating
Aux InputNo
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationPassive 2-way coaxial PA speaker
Coverage90° x 60° (rotatable horn)
DSPNo (passive)
Dimensions14.8”H x 9.8”W x 9.8”D (375 x 250 x 250 mm)
Drivers8” neodymium woofer, 1” neodymium compression driver (coaxial)
Frequency Response70Hz - 19kHz (-6dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
InputsTwo Speakon NL4 connectors
Maximum SPL124dB (manufacturer specified)
Microphone InputNo
Optical InputNo
Power Handling250W AES / 750W peak (manufacturer specified)
RCA InputNo
RiggingM10 rigging points, 35mm stand flange
Spinorama Preference Score3.39
Spinorama Preference Score with Perfect Sub6.64
TRS InputNo
USB InputNo
Weight17.6 lbs (8.0 kg)
XLR InputNo

LD Systems Stinger 28-A-G3: $799 Thomann eBay

LD Systems Stinger 28-A-G3 ranking card

Pros: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The birch plywood cabinet has a polyurea coating and steel grille, and DynX DSP presets let it work as a full-range top, satellite or monitor. Measured bass extension of 56Hz (-3dB).

Cons: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96. The single-8-inch Stinger 8 A G3 measures better for the money.

AES InputNo
Amplifier Power500W RMS / 1,000W peak, Class-D
Aux InputNo
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialBirch plywood with polyurea coating
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
DSPYes, DynX DSP presets
Drivers2x 8” woofers, BMS compression driver
Frequency Response58Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL131dB (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Spinorama Preference Score1.96
Spinorama Preference Score with Perfect Sub4.44
TRS InputYes
USB InputNo
XLR InputYes