LD Systems Stinger 8-A-G3 vs LD Systems Stinger 28-A-G3

Last updated: September 26, 2026

Short answer: the LD Systems Stinger 8-A-G3. It ranks #12 of 22 8-inch pa speakers by sound quality, rated 3.7/5, at $599.99; the LD Systems Stinger 28-A-G3 ranks #17, rated 3.5/5, and costs $799, so there is little reason to consider the other one.

LD Systems Stinger 8-A-G3 vs LD Systems Stinger 28-A-G3

The case for the LD Systems Stinger 8-A-G3: Medium-quality vendor data returns a 5.20 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 8-inch box. The catch: Its 125dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.

What the LD Systems Stinger 28-A-G3 does well: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. Watch for: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96.

Buy the LD Systems Stinger 8-A-G3. It is rated higher for sound quality than the LD Systems Stinger 28-A-G3 and costs less, which makes it the one to get unless you need something the other one does better.

Looking for alternatives? See the complete PA & Live Sound rankings.

Specifications Side By Side

LD Systems Stinger 8-A-G3 LD Systems Stinger 28-A-G3
Price$599.99$799
Ranked#12 of 22 in 8-Inch PA Speakers#17 of 22 in 8-Inch PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers8” woofer, compression driver2x 8” woofers, BMS compression driver
Frequency Response70Hz - 20kHz (manufacturer specified)58Hz - 20kHz (manufacturer specified)
Dimensions18”H x 10.6”W x 11.4”D (457 x 270 x 290 mm)-
Inputs2 x XLR/TRS line/mic inputs; XLR mono mix output-
Amplifier Power600W peak / 300W RMS500W RMS / 1,000W peak, Class-D
Cabinet Material12mm plywood with polyurea coatingBirch plywood with polyurea coating
RiggingM10 suspension points; 36mm Dual-Tilt pole mount-
Coverage90° x 50°90° x 50°
Maximum SPL125dB peak (manufacturer specified)131dB (manufacturer specified)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)56Hz (measured, vendor Spinorama data)
DSPYesYes, DynX DSP presets
BluetoothNoNo
Weight23.1 lbs (10.5 kg)-
Spinorama Preference Score2.881.96
Spinorama Preference Score with Perfect Sub5.204.44
XLR InputYesYes
RCA InputNoNo
TRS InputYesYes
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputYesNo
Guitar InputNoNo
Bass Extension (-10dB)-about 49.6Hz (measured, vendor Spinorama data)

How LD Systems Stinger 8-A-G3 compares with other leading options:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

LD Systems Stinger 8-A-G3: $599.99 Amazon eBay

LD Systems Stinger 8-A-G3 ranking card

Pros: Medium-quality vendor data returns a 5.20 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 8-inch box. At 10.5kg it is one of the lightest active speakers in this ranking. Measured bass extension of 56Hz (-3dB).

Cons: Its 125dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.

AES InputNo
Amplifier Power600W peak / 300W RMS
Aux InputNo
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet Material12mm plywood with polyurea coating
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
DSPYes
Dimensions18”H x 10.6”W x 11.4”D (457 x 270 x 290 mm)
Drivers8” woofer, compression driver
Frequency Response70Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Inputs2 x XLR/TRS line/mic inputs; XLR mono mix output
Maximum SPL125dB peak (manufacturer specified)
Microphone InputYes
Optical InputNo
RCA InputNo
RiggingM10 suspension points; 36mm Dual-Tilt pole mount
Spinorama Preference Score2.88
Spinorama Preference Score with Perfect Sub5.20
TRS InputYes
USB InputNo
Weight23.1 lbs (10.5 kg)
XLR InputYes

LD Systems Stinger 28-A-G3: $799 Thomann eBay

LD Systems Stinger 28-A-G3 ranking card

Pros: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The birch plywood cabinet has a polyurea coating and steel grille, and DynX DSP presets let it work as a full-range top, satellite or monitor. Measured bass extension of 56Hz (-3dB).

Cons: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96. The single-8-inch Stinger 8 A G3 measures better for the money.

AES InputNo
Amplifier Power500W RMS / 1,000W peak, Class-D
Aux InputNo
Bass Extension (-10dB)about 49.6Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialBirch plywood with polyurea coating
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
DSPYes, DynX DSP presets
Drivers2x 8” woofers, BMS compression driver
Frequency Response58Hz - 20kHz (manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL131dB (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Spinorama Preference Score1.96
Spinorama Preference Score with Perfect Sub4.44
TRS InputYes
USB InputNo
XLR InputYes