Short answer: the LD Systems Stinger 28-A-G3. It ranks #21 of 44 8-inch pa speakers by sound quality, rated 3.5/5, at $799; the Biamp Community V2-28 ranks #42, rated 2.4/5, and costs $851, so there is not much of a tradeoff to weigh.
The LD Systems Stinger 28-A-G3 is the more accurate, deeper-bass option. Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. Its measured preference score, a predictor of how neutral it sounds, is 1.96 against -1.60 for the Biamp Community V2-28. Its bass reaches about 56Hz before falling 3dB, against 90Hz for the Biamp Community V2-28. Watch for: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96.
The case for the Biamp Community V2-28: Two 8-inch woofers and 94dB sensitivity give more output than the single-woofer Biamp Community V2-8, with bass to about 59Hz at -10dB in vendor measurements. The catch: Preference scores of -1.6 standalone and 1.65 with an ideal subwoofer are among the lowest here, because the listening window spreads across a 9.9dB band.
Buy the LD Systems Stinger 28-A-G3. It is rated higher for sound quality than the Biamp Community V2-28 and costs less, so only choose the other one for a particular feature it does better.
Want more options? Browse the full PA & Live Sound rankings.
Specifications Side By Side
| LD Systems Stinger 28-A-G3 | Biamp Community V2-28 | |
|---|---|---|
| Price | $799 | $851.00 Passive |
| Ranked | #21 of 44 in 8-Inch PA Speakers | #42 of 44 in 8-Inch PA Speakers |
| Rigging | M10 rigging points; 36mm dual-tilt pole mount | 13 x M6 rigging inserts; yoke bracket included |
| Weight | 45.2 lbs (20.5 kg) | 36.8 lbs (16.7 kg) |
| Passive | No | Yes |
| Configuration | Active 2-way bass-reflex PA speaker | Passive 2-way installation PA speaker |
| Drivers | 2x 8” woofers, BMS compression driver | 2 x 8” woofers, compression driver |
| Frequency Response | 58Hz - 20kHz (manufacturer specified) | 60Hz - 18kHz (-10dB, manufacturer specified) |
| Amplifier Power | 500W RMS / 1,000W peak, Class-D | Passive speaker; requires external amplification |
| Maximum SPL | 131dB (manufacturer specified) | 125dB peak (manufacturer specified) |
| Coverage | 90° x 50° | - |
| Cabinet Material | Birch plywood with polyurea coating | - |
| DSP | Yes, DynX DSP presets | No (passive) |
| Bluetooth | No | No |
| XLR Input | Yes | No |
| RCA Input | No | No |
| TRS Input | Yes | No |
| Optical Input | No | No |
| Coaxial Input | No | No |
| USB Input | No | No |
| HDMI Input | No | No |
| AES Input | No | No |
| Aux Input | No | No |
| Microphone Input | No | No |
| Guitar Input | No | No |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) | 90Hz (measured, vendor Spinorama data) |
| Bass Extension (-10dB) | about 49.6Hz (measured, vendor Spinorama data) | about 59.5Hz (measured, vendor Spinorama data) |
| Spinorama Preference Score | 1.96 | -1.60 |
| Spinorama Preference Score with Perfect Sub | 4.44 | 1.65 |
| Power Handling | - | 300W continuous / 750W program |
| Sensitivity | - | 94dB |
Frequency Response Compared
Both speakers’ spinorama measurements, overlaid. A flatter line is more neutral: peaks sound forward or harsh, dips sound recessed. Each curve is shifted so its average from 300 Hz to 3 kHz sits at 0 dB, so loudness differences between the two are removed and only the shape is compared.
Measurement data: LD Systems Stinger 28-A-G3 (measured by the manufacturer) and Biamp Community V2-28 (measured by the manufacturer), via spinorama.org.
Related Speaker Comparisons
More worthwhile head-to-heads for LD Systems Stinger 28-A-G3:
- JBL PRX908 vs LD Systems Stinger 28-A-G3
- LD Systems Stinger 8-A-G3 vs LD Systems Stinger 28-A-G3
- Coda Audio HOPS8 vs LD Systems Stinger 28-A-G3
- Seeburg X2 vs LD Systems Stinger 28-A-G3
- LD Systems Stinger 28-A-G3 vs RCF ART 708-A MK5
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
LD Systems Stinger 28-A-G3: $799 Thomann eBay
Same family: the LD Systems Stinger 8-A-G3 (smaller model, ranked higher, rated 3.7/5), the LD Systems Stinger 10-A-G3 (larger model, rated 4.1/5), the LD Systems Stinger 12 A G3 (larger model, rated 3.5/5) and the LD Systems Stinger 15-A-G3 (larger model, rated 3.4/5).
Pros: Two 8-inch woofers give bass to 56Hz at -3dB and about 50Hz at -10dB, deep for an 8-inch design, from a 500W (1000W peak) amplifier rated to 131dB. The birch plywood cabinet has a polyurea coating and steel grille, and DynX DSP presets let it work as a full-range top, satellite or monitor. Measured bass extension of 56Hz (-3dB).
Cons: Manufacturer measurements show a wide 3.7dB reference band and 0.729 listening-window deviation, so tonal balance is uneven, and the standalone preference score is only 1.96. The single-8-inch LD Systems Stinger 8-A-G3 measures better for the money.
Full LD Systems Stinger 28-A-G3 review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 500W RMS / 1,000W peak, Class-D |
| Aux Input | No |
| Bass Extension (-10dB) | about 49.6Hz (measured, vendor Spinorama data) |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Birch plywood with polyurea coating |
| Coaxial Input | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 50° |
| DSP | Yes, DynX DSP presets |
| Drivers | 2x 8” woofers, BMS compression driver |
| Frequency Response | 58Hz - 20kHz (manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Maximum SPL | 131dB (manufacturer specified) |
| Microphone Input | No |
| Optical Input | No |
| Passive | No |
| RCA Input | No |
| Rigging | M10 rigging points; 36mm dual-tilt pole mount |
| Spinorama Preference Score | 1.96 |
| Spinorama Preference Score with Perfect Sub | 4.44 |
| TRS Input | Yes |
| USB Input | No |
| Weight | 45.2 lbs (20.5 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Biamp Community V2-28: $851.00 Passive Amazon eBay
Same family: the Biamp Community V2-6 (smaller model, rated 2.8/5), the Biamp Community V2-26 (smaller model, rated 2.8/5), the Biamp Community V2-8 (smaller model, ranked higher, rated 2.7/5), the Biamp Community V2-3294 (larger model, rated 2.7/5) and the Biamp Community V2-3594 (larger model, rated 2.7/5).
Pros: Two 8-inch woofers and 94dB sensitivity give more output than the single-woofer Biamp Community V2-8, with bass to about 59Hz at -10dB in vendor measurements. Measured bass extension of 90Hz (-3dB).
Cons: Preference scores of -1.6 standalone and 1.65 with an ideal subwoofer are among the lowest here, because the listening window spreads across a 9.9dB band. It is passive and weighs 16.7kg.
Full Biamp Community V2-28 review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | Passive speaker; requires external amplification |
| Aux Input | No |
| Bass Extension (-10dB) | about 59.5Hz (measured, vendor Spinorama data) |
| Bass Extension (-3dB) | 90Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Coaxial Input | No |
| Configuration | Passive 2-way installation PA speaker |
| DSP | No (passive) |
| Drivers | 2 x 8” woofers, compression driver |
| Frequency Response | 60Hz - 18kHz (-10dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Maximum SPL | 125dB peak (manufacturer specified) |
| Microphone Input | No |
| Optical Input | No |
| Passive | Yes |
| Power Handling | 300W continuous / 750W program |
| RCA Input | No |
| Rigging | 13 x M6 rigging inserts; yoke bracket included |
| Sensitivity | 94dB |
| Spinorama Preference Score | -1.60 |
| Spinorama Preference Score with Perfect Sub | 1.65 |
| TRS Input | No |
| USB Input | No |
| Weight | 36.8 lbs (16.7 kg) |
| XLR Input | No |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons