Tannoy VX8 vs Biamp Community V2-28

Last updated: October 11, 2026

Short answer: the Tannoy VX8. It ranks #37 of 44 8-inch pa speakers by sound quality, rated 3.0/5, at $1,138. The Biamp Community V2-28 ranks #42, rated 2.4/5, at $851, $287 cheaper, which does not close the gap in sound quality.

Tannoy VX8 vs Biamp Community V2-28

The Tannoy VX8 is the better-sounding pick. A passive model from Tannoy’s VX range alongside the measured Tannoy VX12: the 8” model, with a little more output and bass than the VX 6. Watch for: No independent measurements yet, so it can’t be compared with ranked PA speakers.

The case for the Biamp Community V2-28: Two 8-inch woofers and 94dB sensitivity give more output than the single-woofer Biamp Community V2-8, with bass to about 59Hz at -10dB in vendor measurements. The catch: Preference scores of -1.6 standalone and 1.65 with an ideal subwoofer are among the lowest here, because the listening window spreads across a 9.9dB band.

Buy the Tannoy VX8. It is rated higher for sound quality, and the $287 saving on the Biamp Community V2-28 is not enough to make up the difference.

Worth knowing: the Tannoy VX8 has not been measured yet. Its rating is estimated from related models, with a likely range of 2.6 to 3.4, so treat this verdict as provisional.

Still deciding? The full PA & Live Sound rankings cover every ranked option.

Specifications Side By Side

Tannoy VX8 Biamp Community V2-28
Price$1,138.00 per pair Passive$851.00 Passive
Ranked#37 of 44 in 8-Inch PA Speakers Estimated#42 of 44 in 8-Inch PA Speakers
Weight17.9 lbs (8.1 kg)36.8 lbs (16.7 kg)
Bass Extension (-3dB)85Hz (manufacturer specified)90Hz (measured, vendor Spinorama data)
RiggingM10 flying and yoke inserts; M6 inserts; optional pole mount13 x M6 rigging inserts; yoke bracket included
PassiveYesYes
ConfigurationPassive Dual Concentric PA speakerPassive 2-way installation PA speaker
Drivers8” Dual Concentric driver2 x 8” woofers, compression driver
Frequency Response85Hz - 35kHz (-3dB), 62Hz (-10dB) (manufacturer specified)60Hz - 18kHz (-10dB, manufacturer specified)
Sensitivity92dB94dB
Maximum SPL119dB peak / 113dB average (manufacturer specified)125dB peak (manufacturer specified)
Power Handling130W average / 520W peak300W continuous / 750W program
Impedance8 ohms-
XLR InputNoNo
BluetoothNoNo
DSPNo (passive)No (passive)
Amplifier PowerPassive speaker; requires external amplificationPassive speaker; requires external amplification
RCA Input-No
TRS Input-No
Optical Input-No
Coaxial Input-No
USB Input-No
HDMI Input-No
AES Input-No
Aux Input-No
Microphone Input-No
Guitar Input-No
Bass Extension (-10dB)-about 59.5Hz (measured, vendor Spinorama data)
Spinorama Preference Score--1.60
Spinorama Preference Score with Perfect Sub-1.65

More top alternatives to Tannoy VX8:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Tannoy VX8: $1,138.00 per pair Passive Estimated B&H Photo Video eBay

Tannoy VX8 ranking card

Same family: the Tannoy VX6 (smaller model, estimated 2.9/5), the Tannoy VX12 (larger model, rated 3.1/5) and the Tannoy VX15HP (larger model, estimated 3.1/5).

Pros: A passive model from Tannoy’s VX range alongside the measured Tannoy VX12: the 8” model, with a little more output and bass than the VX 6. Every VX uses a Dual Concentric driver with the tweeter in the center of the woofer, so the sound comes from one point and stays consistent off axis. Tannoy rates it at 92dB sensitivity and 119dB peak / 113dB average.

Cons: No independent measurements yet, so it can’t be compared with ranked PA speakers. It needs an external amplifier, ideally with Tannoy’s recommended EQ, and US dealers list it as a special order with long lead times.

Amplifier PowerPassive speaker; requires external amplification
Bass Extension (-3dB)85Hz (manufacturer specified)
BluetoothNo
ConfigurationPassive Dual Concentric PA speaker
DSPNo (passive)
Drivers8” Dual Concentric driver
Frequency Response85Hz - 35kHz (-3dB), 62Hz (-10dB) (manufacturer specified)
Impedance8 ohms
Maximum SPL119dB peak / 113dB average (manufacturer specified)
PassiveYes
Power Handling130W average / 520W peak
RiggingM10 flying and yoke inserts; M6 inserts; optional pole mount
Sensitivity92dB
Weight17.9 lbs (8.1 kg)
XLR InputNo

Biamp Community V2-28: $851.00 Passive Amazon eBay

Biamp Community V2-28 ranking card

Same family: the Biamp Community V2-6 (smaller model, rated 2.8/5), the Biamp Community V2-26 (smaller model, rated 2.8/5), the Biamp Community V2-8 (smaller model, ranked higher, rated 2.7/5), the Biamp Community V2-3294 (larger model, rated 2.7/5) and the Biamp Community V2-3594 (larger model, rated 2.7/5).

Pros: Two 8-inch woofers and 94dB sensitivity give more output than the single-woofer Biamp Community V2-8, with bass to about 59Hz at -10dB in vendor measurements. Measured bass extension of 90Hz (-3dB).

Cons: Preference scores of -1.6 standalone and 1.65 with an ideal subwoofer are among the lowest here, because the listening window spreads across a 9.9dB band. It is passive and weighs 16.7kg.

AES InputNo
Amplifier PowerPassive speaker; requires external amplification
Aux InputNo
Bass Extension (-10dB)about 59.5Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationPassive 2-way installation PA speaker
DSPNo (passive)
Drivers2 x 8” woofers, compression driver
Frequency Response60Hz - 18kHz (-10dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL125dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
PassiveYes
Power Handling300W continuous / 750W program
RCA InputNo
Rigging13 x M6 rigging inserts; yoke bracket included
Sensitivity94dB
Spinorama Preference Score-1.60
Spinorama Preference Score with Perfect Sub1.65
TRS InputNo
USB InputNo
Weight36.8 lbs (16.7 kg)
XLR InputNo