Short answer: the Wharfedale EVO 5.2. Both are rated 4.1/5 for sound quality (#73 and #64 of 214 bookshelf speakers), and the Wharfedale EVO 5.2 costs $1,299 against $1,350 for the Power Sound Audio MT-110-M, and with sound quality even, the cheaper one is the better buy.
Why pick the Power Sound Audio MT-110-M: Made in the USA with a 1” polyimide compression tweeter on a cast aluminum exponential horn plus a 10” high-efficiency neodymium woofer, both BMS-made drivers. Watch for: A mid-range bump makes the tonal balance sound too thick and needs 2-3 bands of EQ to flatten out; correcting it also pulls measured sensitivity down to about 90-91dB in practice.
The case for the Wharfedale EVO 5.2: Large 3-way bookshelf speaker in the EVO 5 series pairing a 6.5-inch woven Kevlar woofer with a 2-inch soft dome midrange and a 35x70mm AMT ribbon tweeter. Watch for: Rating estimated based on EVO 5 series sibling testing.
Buy the Wharfedale EVO 5.2. Both are rated the same for sound quality, and it costs $51 less than the Power Sound Audio MT-110-M.
Worth knowing: the Wharfedale EVO 5.2 has not been measured yet. Its rating is estimated from related models, with a likely range of 3.9 to 4.3, so treat this verdict as provisional.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Power Sound Audio MT-110-M | Wharfedale EVO 5.2 | |
|---|---|---|
| Price | $1,350 per pair | $1,299.00 per pair |
| Ranked | #64 of 214 in Large Size Bookshelf Speakers | #73 of 214 in Large Size Bookshelf Speakers Estimated |
| Drivers | 1” polyimide compression tweeter with cast aluminum exponential horn, 10” high-efficiency neodymium woofer | 35x70mm AMT ribbon tweeter, 2” (50mm) soft dome midrange, 6.5” (165mm) woven Kevlar cone woofer |
| Dimensions | 17.5”H x 11”W x 14”D (includes grille) | 17.9”H x 10”W x 13.8”D (455 x 255 x 350 mm) |
| Weight | 30 lbs (13.6 kg) each (unboxed) | 29.5 lbs (13.4 kg) each |
| Impedance | 8 ohms nominal (measured, Erin’s Audio Corner; matches manufacturer spec) | 4 ohms nominal, 8 ohm compatible (manufacturer specified) |
| Sensitivity | 92.5dB (measured at 2.83V/1m, Erin’s Audio Corner; matches manufacturer spec) | 88dB (2.83V/1m, manufacturer specified) |
| Bass Extension (-3dB) | 113Hz (measured, Erin’s Audio Corner) | 48Hz (manufacturer specified) |
| Bass Extension (-10dB) | 68Hz (measured, Erin’s Audio Corner) | - |
| Power Handling | 175W | - |
| Woofer Cabinet | sealed | - |
| Country | USA | - |
| Spinorama Preference Score | 2.53 | - |
| Spinorama Preference Score with Perfect Sub | 5.86 | - |
| DIY Kit | No | No |
| Frequency Response | - | 48Hz - 24kHz (±3dB, manufacturer specified) |
| Bass Extension (-6dB) | - | 40Hz (manufacturer specified) |
Related Speaker Comparisons
More worthwhile head-to-heads for Power Sound Audio MT-110-M:
- KEF R3 Meta vs Power Sound Audio MT-110-M
- KEF Q Concerto Meta vs Power Sound Audio MT-110-M
- KEF R3 vs Power Sound Audio MT-110-M
- ELAC Debut 3.0 DB63 vs Power Sound Audio MT-110-M
- Arendal 1723 Bookshelf S THX vs Power Sound Audio MT-110-M
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Power Sound Audio MT-110-M: $1,350 per pair Power Sound Audio eBay
Pros: Made in the USA with a 1” polyimide compression tweeter on a cast aluminum exponential horn plus a 10” high-efficiency neodymium woofer, both BMS-made drivers. Reasonably high measured sensitivity (about 92.5dB at 2.83V/1m), so it doesn’t need much power to play loud. Excellent dynamic range: frequency response barely shifts (about 0.5dB deviation) from 76dB to 102dB output, which the reviewer calls completely acceptable headroom. Not fatiguing or bright despite the horn-loaded compression driver: the constant-directivity horn avoids the artificially flat, reflection-heavy in-room high-frequency buildup that some waveguide designs suffer from. Sealed cabinet design means placement near a wall is less of a bass-reinforcement concern than with a ported design. Solid build quality using threaded nutserts rather than screws driven directly into the cabinet wood. Measured bass extension of 113Hz (-3dB), with a measured sensitivity of 92.5dB.
Cons: A mid-range bump makes the tonal balance sound too thick and needs 2-3 bands of EQ to flatten out; correcting it also pulls measured sensitivity down to about 90-91dB in practice. F3 of 113Hz and F10 of 68Hz mean this doesn’t get low without a subwoofer: in the reviewer’s room it barely reached 70Hz with any real authority. Rising distortion in the upper mid-range, likely from woofer breakup, that lines up with anomalies seen in the impedance sweep above 500Hz: not a major concern but worth noting. The reviewer explicitly frames this as a home theater speaker rather than a stereo/music speaker.
Full Power Sound Audio MT-110-M review and specifications →
| Released | Oct 2023 (3 years ago) |
|---|---|
| Bass Extension (-10dB) | 68Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 113Hz (measured, Erin’s Audio Corner) |
| Country | USA |
| DIY Kit | No |
| Dimensions | 17.5”H x 11”W x 14”D (includes grille) |
| Drivers | 1” polyimide compression tweeter with cast aluminum exponential horn, 10” high-efficiency neodymium woofer |
| Impedance | 8 ohms nominal (measured, Erin’s Audio Corner; matches manufacturer spec) |
| Power Handling | 175W |
| Sensitivity | 92.5dB (measured at 2.83V/1m, Erin’s Audio Corner; matches manufacturer spec) |
| Spinorama Preference Score | 2.53 |
| Spinorama Preference Score with Perfect Sub | 5.86 |
| Weight | 30 lbs (13.6 kg) each (unboxed) |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Power Sound Audio MT-110-M vs ELAC Uni-Fi Reference UBR62
- Power Sound Audio MT-110-M vs Arendal Sound 1723 Monitor THX
- Power Sound Audio MT-110-M vs Arendal 1723 Bookshelf S THX
- Power Sound Audio MT-110-M vs ELAC Debut 3.0 DB63
- Power Sound Audio MT-110-M vs SVS Ultra Bookshelf
- Power Sound Audio MT-110-M vs KEF R3
- Power Sound Audio MT-110-M vs KEF Q Concerto Meta
- Power Sound Audio MT-110-M vs KEF R3 Meta
- See all 9 comparisons
Wharfedale EVO 5.2: $1,299.00 per pair Estimated Wharfedale eBay
Same family: the Wharfedale EVO 5.1 (smaller bookshelf, estimated 3.9/5), the Wharfedale EVO 5.3 (smaller floorstanding, estimated 4.2/5), the Wharfedale EVO 5.4 (larger floorstanding, estimated 4.3/5) and the Wharfedale EVO 5.C (center, estimated 4/5). See every Wharfedale EVO generation.
Pros: Large 3-way bookshelf speaker in the EVO 5 series pairing a 6.5-inch woven Kevlar woofer with a 2-inch soft dome midrange and a 35x70mm AMT ribbon tweeter. The dedicated midrange dome ensures clear vocal intelligibility and reduced Doppler distortion compared to 2-way designs.
Cons: Rating estimated based on EVO 5 series sibling testing. Cabinet depth of 350mm requires heavy-duty speaker stands and placement away from rear walls.
Full Wharfedale EVO 5.2 review and specifications →
| Released | May 2025 (1 year ago) |
|---|---|
| Bass Extension (-3dB) | 48Hz (manufacturer specified) |
| Bass Extension (-6dB) | 40Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 17.9”H x 10”W x 13.8”D (455 x 255 x 350 mm) |
| Drivers | 35x70mm AMT ribbon tweeter, 2” (50mm) soft dome midrange, 6.5” (165mm) woven Kevlar cone woofer |
| Frequency Response | 48Hz - 24kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms nominal, 8 ohm compatible (manufacturer specified) |
| Sensitivity | 88dB (2.83V/1m, manufacturer specified) |
| Weight | 29.5 lbs (13.4 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons