The Vision Ears VE3.2 ranks #608 out of 668 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Vision Ears
Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#608 Vision Ears VE3.2 Discontinued eBay
Pros: Its tonal tilt of -0.57 sits close to the target, so the overall balance is neither dark nor bright. It uses 3 x balanced armature with an easy 18 ohm load.
Cons: Discontinued, so it is mainly found used. A Harman score of 54 places it in the lower part of the in-ear rankings.
| Released | 2019 (7 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.54 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 3 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 54 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 119 dB/mW |
| Tonal Tilt | -0.57 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.4 dB | 0.70 |
| Peak | 160 Hz | -4.8 dB | 0.31 |
| Peak | 5,450 Hz | +5.1 dB | 0.89 |
| Peak | 2,881 Hz | +3.5 dB | 4.17 |
| Peak | 797 Hz | +2.2 dB | 1.84 |
| High shelf | 10,000 Hz | +6.4 dB | 0.70 |
| Peak | 6,814 Hz | -2.0 dB | 4.69 |
| Peak | 9,436 Hz | -1.5 dB | 2.52 |
| Peak | 77 Hz | +0.4 dB | 1.91 |
| Peak | 40 Hz | -0.4 dB | 1.44 |
- Reviews, Comparisons and Sound Samples