Coverage note. Speaker Ranking currently covers 3 Vision Ears models across headphones. These are the products in our database, not a complete list of everything Vision Ears makes.
What this page covers. The Vision Ears models ranked here span headphones, including Vision Ears VE3.2, Vision Ears VE2 and Vision Ears VE4.2. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 3 Vision Ears speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Discontinued Vision Ears Models
Still ranked, and often still worth buying used, but no longer in production. Check availability before planning around one of these.
In-Ear Headphones
Ranked #608 of 668 in In-Ear Headphones - Vision Ears VE3.2 Discontinued eBay
Pros: Its tonal tilt of -0.57 sits close to the target, so the overall balance is neither dark nor bright. It uses 3 x balanced armature with an easy 18 ohm load.
Cons: Discontinued, so it is mainly found used. A Harman score of 54 places it in the lower part of the in-ear rankings.
Full Vision Ears VE3.2 review and specifications →
| Released | 2019 (7 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.54 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 3 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 54 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 119 dB/mW |
| Tonal Tilt | -0.57 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.4 dB | 0.70 |
| Peak | 160 Hz | -4.8 dB | 0.31 |
| Peak | 5,450 Hz | +5.1 dB | 0.89 |
| Peak | 2,881 Hz | +3.5 dB | 4.17 |
| Peak | 797 Hz | +2.2 dB | 1.84 |
| High shelf | 10,000 Hz | +6.4 dB | 0.70 |
| Peak | 6,814 Hz | -2.0 dB | 4.69 |
| Peak | 9,436 Hz | -1.5 dB | 2.52 |
| Peak | 77 Hz | +0.4 dB | 1.91 |
| Peak | 40 Hz | -0.4 dB | 1.44 |
- Reviews, Comparisons and Sound Samples
Ranked #613 of 668 in In-Ear Headphones - Vision Ears VE2 Discontinued eBay
Pros: It uses 2 x balanced armature with an easy 28 ohm load.
Cons: Discontinued, so it is mainly found used. A Harman score of 53 places it in the lower part of the in-ear rankings.
Full Vision Ears VE2 review and specifications →
| Connection | Wired |
|---|---|
| Deviation From Target | 3.49 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 2 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 53 (measured by crinacle, via AutoEQ) |
| Impedance | 28 ohms |
| Sensitivity | 122 dB/mW |
| Tonal Tilt | -0.72 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.3 dB | 0.70 |
| Peak | 196 Hz | -4.9 dB | 0.48 |
| Peak | 5,248 Hz | +4.7 dB | 0.50 |
| Peak | 813 Hz | +1.8 dB | 1.91 |
| Peak | 9,545 Hz | +3.7 dB | 4.27 |
| High shelf | 10,000 Hz | +5.5 dB | 0.70 |
| Peak | 1,532 Hz | -1.0 dB | 3.00 |
| Peak | 2,878 Hz | +1.7 dB | 3.99 |
| Peak | 9,407 Hz | -3.4 dB | 5.44 |
| Peak | 3,609 Hz | -1.9 dB | 5.99 |
- Reviews, Comparisons and Sound Samples
Ranked #616 of 668 in In-Ear Headphones - Vision Ears VE4.2 Discontinued eBay
Pros: It uses 4 x balanced armature with an easy 16 ohm load.
Cons: Discontinued, so it is mainly found used. A Harman score of 52 places it in the lower part of the in-ear rankings.
Full Vision Ears VE4.2 review and specifications →
| Released | 2019 (7 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.55 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 4 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 52 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 120 dB/mW |
| Tonal Tilt | -0.95 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.1 dB | 0.70 |
| Peak | 182 Hz | -5.9 dB | 0.49 |
| Peak | 962 Hz | +5.6 dB | 0.82 |
| Peak | 3,794 Hz | +4.9 dB | 2.31 |
| Peak | 5,743 Hz | -5.4 dB | 3.71 |
| High shelf | 10,000 Hz | +5.7 dB | 0.70 |
| Peak | 7,090 Hz | -2.0 dB | 5.74 |
| Peak | 2,329 Hz | -1.2 dB | 4.89 |
| Peak | 39 Hz | -0.3 dB | 1.87 |
| Peak | 1,800 Hz | +0.8 dB | 3.71 |
- Reviews, Comparisons and Sound Samples