Vision Ears Go Live Review: Ranked #891 of 1291

Last updated: October 17, 2026

The Vision Ears Go Live ranks #891 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Vision Ears

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#891 Vision Ears Go Live: $499.00 Audio46 $499.00 eBay

Pros: A broadly balanced tuning with a preference score of 66 against the Harman target.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.5 dB standard deviation from target.

Is the Vision Ears Go Live right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 3.4 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 21 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $475 less.
BackClosed
ConnectionWired
Deviation From Target2.46 dB standard deviation
Driver TypeHybrid (1 DD + 3 BA)
Drivers1 x 8mm dynamic driver + 3 x balanced armature drivers (4-way crossover)
Form FactorIn-ear
Frequency Response20Hz - 20kHz
Harman Preference Score66 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance10 ohms
Sensitivity108 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.5 dB at 30 Hz)
Tonal Tilt-0.85 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz-1.1 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak193 Hz-1.9 dB0.66
Peak3,094 Hz+2.4 dB5.87
Peak5,345 Hz+5.3 dB1.04
Peak6,924 Hz-2.2 dB5.52

Neutral target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-9.7 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak174 Hz-1.8 dB0.50
Peak3,094 Hz+2.4 dB5.87
Peak5,345 Hz+5.3 dB1.03
Peak6,926 Hz-2.2 dB5.52

Studio flat target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 10.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak182 Hz-3.6 dB0.53
Peak3,573 Hz+5.1 dB0.83
Peak5,610 Hz+3.4 dB6.00

Warm target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz-0.9 dB0.70
High shelf10,000 Hz-3.9 dB0.70
Peak3,128 Hz+2.5 dB5.80
Peak5,377 Hz+6.0 dB2.53

Bass target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+2.6 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak203 Hz-1.9 dB0.74
Peak3,094 Hz+2.4 dB5.86
Peak5,345 Hz+5.3 dB1.04
Peak6,923 Hz-2.2 dB5.52

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 77 out of 100, up from 18.

FilterFrequencyGainQ
Low shelf105 Hz-9.7 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak4,408 Hz+6.0 dB1.05

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 79 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak1,708 Hz-0.6 dB0.40
Peak3,093 Hz+1.2 dB6.00
Peak3,807 Hz+6.0 dB1.00
Peak5,605 Hz+2.8 dB5.89

Frequency Response

How the Vision Ears Go Live measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Vision Ears Go LiveHarman target
Measured frequency response of the Vision Ears Go Live-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of eliseaudio, elrics and faxepremium. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons

More Vision Ears headphones →