Short answer: the TANGZU Wan’er S.G 2. It ranks #205 of 361 in-ear headphones by sound quality, rated 4.2/5, at $24. The TANGZU Wan’er S.G ranks #244, rated 3.8/5, at $18, $6 cheaper, which does not close the gap in sound quality.
The case for the TANGZU Wan’er S.G: Crinacle’s measurement gives it a preference score of 71, and squig.link measurements show bass and midrange within about 1 dB of target from 20 Hz to 3 kHz, so voices and instruments sound natural at a very low price. The catch: Across 25 hobbyist measurements presence and treble sit about 3.5 to 4 dB below target from 3 to 10 kHz, with a 7 dB dip near 6.3 kHz, so cymbals and fine detail sound a bit softened.
The TANGZU Wan’er S.G 2 is the better-sounding pick.
Buy the TANGZU Wan’er S.G 2. It is rated higher for sound quality, and saving $6 with the TANGZU Wan’er S.G does not make up for the sound-quality gap.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| TANGZU Wan’er S.G | TANGZU Wan’er S.G 2 | |
|---|---|---|
| Price | $18.00 | $24.00 |
| Ranked | #244 of 361 in In-Ear Headphones | #205 of 361 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 71 (measured by crinacle, via AutoEQ) | 76 (median of 9 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.48 dB standard deviation | 1.83 dB standard deviation |
| Tonal Tilt | -0.32 (negative is warmer, positive brighter) | -0.28 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Weight | 0 lbs (4.2 g) per earbud | - |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | - |
| Built-in Microphone | Yes | - |
| Back | Closed | Closed |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) |
Related Headphone Comparisons
More worthwhile head-to-heads for TANGZU Wan’er S.G 2:
- TANGZU Wan’er S.G vs KZ ZST
- CCA C12 vs MEE Audio M6 Pro
- KZ ZAX vs MEE Audio M6 Pro
- KZ ZST vs TRN MT1
- Tin HiFi C3 vs Tin HiFi C3 MKII
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
TANGZU Wan’er S.G: $18.00 Amazon AliExpress eBay
Pros: Crinacle’s measurement gives it a preference score of 71, and squig.link measurements show bass and midrange within about 1 dB of target from 20 Hz to 3 kHz, so voices and instruments sound natural at a very low price. Each earbud weighs 4.2 g, and a built-in microphone handles calls. It rates above the KZ ZST and costs less.
Cons: Across 25 hobbyist measurements presence and treble sit about 3.5 to 4 dB below target from 3 to 10 kHz, with a 7 dB dip near 6.3 kHz, so cymbals and fine detail sound a bit softened. The CCA CRA and 7Hz x Crinacle Zero 2 rate a little higher for only slightly more money.
Full TANGZU Wan’er S.G review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 2.48 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 71 (measured by crinacle, via AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz) |
| Tonal Tilt | -0.32 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4.2 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.8 dB | 0.70 |
| Peak | 6,638 Hz | +5.1 dB | 1.36 |
| Peak | 145 Hz | -2.6 dB | 0.76 |
| Peak | 1,930 Hz | -2.9 dB | 1.79 |
| Peak | 9,431 Hz | +3.0 dB | 2.56 |
| High shelf | 10,000 Hz | -1.1 dB | 0.70 |
| Peak | 894 Hz | +1.2 dB | 1.34 |
| Peak | 1,321 Hz | -1.2 dB | 2.81 |
| Peak | 275 Hz | -0.4 dB | 1.71 |
| Peak | 570 Hz | +0.5 dB | 2.18 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
TANGZU Wan’er S.G 2: $24.00 Amazon eBay
Full TANGZU Wan’er S.G 2 review and specifications →
| Released | Mar 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.83 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 76 (median of 9 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) |
| Tonal Tilt | -0.28 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples