Klipsch RP-6000F II Specifications and Review

Last updated: September 8, 2026

The Klipsch RP-6000F II ranks #54 out of 71 total Large Size Floorstanding Speakers for sound quality. See Top Recommended Speakers By Attribute for all the top speaker suggestions.

Brand: Klipsch

Prices on this page were last checked September 8, 2026 at 6:02 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#54 Klipsch RP-6000F II: $1500 Amazon eBay

Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity.

Cons: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have - a real regression in tonal balance despite the higher price. Bass extension is mixed - less deep at -3dB (67Hz) than the 5000F - and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).

How it compares: Just above it: Dynaudio Emit 30 - $226 cheaper, 3Hz lower bass extension (-3dB). Just below it: Polk T50 - $1291 cheaper, 3.7Hz lower bass extension (-3dB).

Bass Extension (-10dB)33Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)67Hz (measured, Erin's Audio Corner)
Crossover Frequency1770Hz
Dimensions39.6" x 9.3" x 17.6" (1006 x 236 x 446 mm)
Drivers1" titanium tweeter with Tractrix horn, dual 6.5" cerametallic woofers
Frequency Response38Hz - 25kHz (+-3dB, Manufacturer specified)
Impedance8 ohms nominal (3.7 ohms minimum, measured, Erin's Audio Corner)
Output Power125W continuous, 500W peak
Sensitivity90dB (2.83V/1m, measured by Erin's Audio Corner)
Weight49.4 lbs / 22.4 kg
Woofer Cabinetported, rear

More Klipsch speakers →