Definitive Technology BP-9020 vs Klipsch RP-6000F II

Last updated: August 25, 2026

Short answer: the Definitive Technology BP-9020. It ranks #39 of 71 floorstanding speakers by sound quality at $500; the Klipsch RP-6000F II ranks #54 and costs $1500, so there is not much of a tradeoff to weigh.

What the Definitive Technology BP-9020 offers: Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Forward-Focused Bipolar Array technology (dual 3.5” front midrange drivers + 1” annealed aluminum dome tweeter, plus a 3.5” rear-firing midrange driver) creates a remarkably wide, spacious soundstage with broad room envelopment. On-axis frequency response stays smooth and relatively neutral when listened to directly aligned with the tweeter. Measured average sensitivity of 87.7dB SPL (2.83V/1m) allows comfortable drive from standard multi-channel receivers. Watch for: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds. Bipolar rear driver radiation creates a diffuse soundstage that compromises razor-sharp imaging focus and pinpoint instrument placement. DSP-based internal limiter aggressively compresses output below 80Hz at higher listening levels, causing lower mid-bass and sub-bass impact to diminish as volume increases. Midrange clarity shows slight ‘cuppiness’ and upper-frequency directivity irregularities due to front/rear driver interaction.

What the Klipsch RP-6000F II offers: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Watch for: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have - a real regression in tonal balance despite the higher price. Bass extension is mixed - less deep at -3dB (67Hz) than the 5000F - and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).

Buy the Definitive Technology BP-9020. It ranks higher for sound quality than the Klipsch RP-6000F II and costs less, so there is no real case for the other one.

If sound quality matters at all to you, skip the Klipsch RP-6000F II. It ranks near the bottom of the 71 floorstanding speakers, so look higher up the list instead.

Definitive Technology BP-9020 vs Klipsch RP-6000F II

Specifications Side By Side

Definitive Technology BP-9020 Klipsch RP-6000F II
Price$500.00 Discontinued$1500
Ranked#39 of 71 in Large Size Floorstanding Speakers#54 of 71 in Large Size Floorstanding Speakers
Bass Extension (-10dB)29Hz (measured, Erin’s Audio Corner)33Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)35Hz (measured, Erin’s Audio Corner)67Hz (measured, Erin’s Audio Corner)
Dimensions35.3"H x 11"W x 13"D (895.4 x 279.4 x 330.2 mm)39.6" x 9.3" x 17.6" (1006 x 236 x 446 mm)
DiscontinuedYes-
Impedance8 ohms nominal8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity87.7dB (measured average, Erin’s Audio Corner)90dB (2.83V/1m, measured by Erin’s Audio Corner)
Drivers1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwoofer1" titanium tweeter with Tractrix horn, dual 6.5" cerametallic woofers
Weight30 lbs / 13.6 kg each49.4 lbs / 22.4 kg
Woofer Cabinetported, slotported, rear
Frequency Response-38Hz - 25kHz (+-3dB, Manufacturer specified)
Crossover Frequency-1770Hz
Output Power-125W continuous, 500W peak

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Definitive Technology BP-9020: $500.00 Discontinued eBay

Definitive Technology BP-9020 ranking card

Pros: Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Forward-Focused Bipolar Array technology (dual 3.5” front midrange drivers + 1” annealed aluminum dome tweeter, plus a 3.5” rear-firing midrange driver) creates a remarkably wide, spacious soundstage with broad room envelopment. On-axis frequency response stays smooth and relatively neutral when listened to directly aligned with the tweeter. Measured average sensitivity of 87.7dB SPL (2.83V/1m) allows comfortable drive from standard multi-channel receivers.

Cons: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds. Bipolar rear driver radiation creates a diffuse soundstage that compromises razor-sharp imaging focus and pinpoint instrument placement. DSP-based internal limiter aggressively compresses output below 80Hz at higher listening levels, causing lower mid-bass and sub-bass impact to diminish as volume increases. Midrange clarity shows slight ‘cuppiness’ and upper-frequency directivity irregularities due to front/rear driver interaction. Discontinued.

Bass Extension (-10dB)29Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)35Hz (measured, Erin's Audio Corner)
Dimensions35.3"H x 11"W x 13"D (895.4 x 279.4 x 330.2 mm)
DiscontinuedYes
Drivers1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwoofer
Impedance8 ohms nominal
Sensitivity87.7dB (measured average, Erin's Audio Corner)
Weight30 lbs / 13.6 kg each
Woofer Cabinetported, slot

Klipsch RP-6000F II: $1500 Amazon eBay

Klipsch RP-6000F II ranking card

Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity.

Cons: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have - a real regression in tonal balance despite the higher price. Bass extension is mixed - less deep at -3dB (67Hz) than the 5000F - and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).

Bass Extension (-10dB)33Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)67Hz (measured, Erin's Audio Corner)
Crossover Frequency1770Hz
Dimensions39.6" x 9.3" x 17.6" (1006 x 236 x 446 mm)
Drivers1" titanium tweeter with Tractrix horn, dual 6.5" cerametallic woofers
Frequency Response38Hz - 25kHz (+-3dB, Manufacturer specified)
Impedance8 ohms nominal (3.7 ohms minimum, measured, Erin's Audio Corner)
Output Power125W continuous, 500W peak
Sensitivity90dB (2.83V/1m, measured by Erin's Audio Corner)
Weight49.4 lbs / 22.4 kg
Woofer Cabinetported, rear