Short answer: the KEF Blade Two Meta for better sound quality, the Klipsch RP-6000F II for the lower price. The KEF Blade Two Meta ranks #2 of 71 floorstanding speakers at $28000. The Klipsch RP-6000F II ranks #54 at $1500, $26500 cheaper.
What the Klipsch RP-6000F II offers: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Watch for: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have - a real regression in tonal balance despite the higher price. Bass extension is mixed - less deep at -3dB (67Hz) than the 5000F - and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).
What the KEF Blade Two Meta offers: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal and vertical dispersion, unusual for a multi-driver speaker. Fully rounded, edgeless cabinet eliminates baffle diffraction. Frequency response holds within about 2.5dB across the listening window. Extremely low harmonic and multitone distortion even at 96dB, with under 0.5dB of compression at full output, rivaling the Reference 1 Meta and JBL 4367 in dynamic range. Reviewer described the imaging and soundstage depth as revealing recording details other speakers he tested (PS Audio FR10, MoFi SourcePoint 8, Neumann KH80) masked. Available in any custom finish at no extra charge. Watch for: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related. Bass rolls off fairly quickly below its 31Hz F3. Horizontal dispersion (~50 degrees) is narrower than the reviewer preferred 70-80 degrees; benefits from toeing out 10-20 degrees to open soundstage without losing image focus. Needs a separate power amp, not AVR-friendly.
Buy the Klipsch RP-6000F II if the price is the priority over sound quality, or the KEF Blade Two Meta if sound quality is the priority over the price.
The Klipsch RP-6000F II is not a sound-quality pick. It sits near the bottom of the 71 floorstanding speakers; there are better options higher up.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Klipsch RP-6000F II | KEF Blade Two Meta | |
|---|---|---|
| Price | $1500 per pair | $28000 per pair only sold in stores |
| Ranked | #54 of 71 in Large Size Floorstanding Speakers | #2 of 71 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 33Hz (measured, Erin's Audio Corner) | 26Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 67Hz (measured, Erin's Audio Corner) | 31Hz (measured, Erin's Audio Corner) |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) | 86.8dB (measured, Erin's Audio Corner) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 6.5" cerametallic woofers | 4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter |
| Weight | 49.4 lbs (22.4 kg) | 79.4 lbs (36 kg) each |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin's Audio Corner) | 4 ohms nominal (3.3 ohms minimum, measured, Erin's Audio Corner) |
| Frequency Response | 38Hz - 25kHz (+-3dB, Manufacturer specified) | - |
| Crossover Frequency | 1770Hz | - |
| Power Handling | 125W continuous, 500W peak | - |
| Dimensions | 39.6" x 9.3" x 17.6" (1006 x 236 x 446 mm) | 46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm) |
| Woofer Cabinet | ported, rear | ported, rear |
| Spinorama Preference Score | 4.83 | 6.25 |
| Spinorama Preference Score with Perfect Sub | 6.56 | 7.37 |
Related Speaker Comparisons
More top alternatives to KEF Blade Two Meta:
- GR-Research NX-Treme vs KEF Blade Two Meta
- KEF Blade Two Meta vs MoFi SourcePoint V10 Master Edition
- KEF Blade Two Meta vs MoFi SourcePoint 888
- Radiant Acoustics Clarity 66 vs KEF Blade Two Meta
- Ascend Acoustics ELX Ribbon Tower vs KEF Blade Two Meta
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-6000F II: $1500 per pair Amazon eBay
Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Measured bass extension of 67Hz (-3dB), with a measured sensitivity of 90dB.
Cons: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have - a real regression in tonal balance despite the higher price. Bass extension is mixed - less deep at -3dB (67Hz) than the 5000F - and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).
Full Klipsch RP-6000F II review and specifications →
| Bass Extension (-10dB) | 33Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 67Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1770Hz |
| Dimensions | 39.6" x 9.3" x 17.6" (1006 x 236 x 446 mm) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 6.5" cerametallic woofers |
| Frequency Response | 38Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin's Audio Corner) |
| Power Handling | 125W continuous, 500W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) |
| Spinorama Preference Score | 4.83 |
| Spinorama Preference Score with Perfect Sub | 6.56 |
| Weight | 49.4 lbs (22.4 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-6000F II vs Dynaudio Emit 30
- Klipsch RP-6000F II vs Polk T50
- Klipsch RP-6000F II vs Klipsch RP-8000F II
- Klipsch RP-6000F II vs Focal Aria Evo X N°2
- Klipsch RP-6000F II vs Sony SS-CS3
- Klipsch RP-6000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-6000F II vs Klipsch RP-5000F II
- Klipsch RP-6000F II vs Infinity Reference 253
- See all 41 comparisons
KEF Blade Two Meta: $28000 per pair only sold in stores eBay
Pros: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal and vertical dispersion, unusual for a multi-driver speaker. Fully rounded, edgeless cabinet eliminates baffle diffraction. Frequency response holds within about 2.5dB across the listening window. Extremely low harmonic and multitone distortion even at 96dB, with under 0.5dB of compression at full output, rivaling the Reference 1 Meta and JBL 4367 in dynamic range. Reviewer described the imaging and soundstage depth as revealing recording details other speakers he tested (PS Audio FR10, MoFi SourcePoint 8, Neumann KH80) masked. Available in any custom finish at no extra charge. Measured bass extension of 31Hz (-3dB), with a measured sensitivity of 86.8dB.
Cons: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related. Bass rolls off fairly quickly below its 31Hz F3. Horizontal dispersion (~50 degrees) is narrower than the reviewer preferred 70-80 degrees; benefits from toeing out 10-20 degrees to open soundstage without losing image focus. Needs a separate power amp, not AVR-friendly.
Full KEF Blade Two Meta review and specifications →
| Bass Extension (-10dB) | 26Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 31Hz (measured, Erin's Audio Corner) |
| Dimensions | 46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm) |
| Drivers | 4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter |
| Impedance | 4 ohms nominal (3.3 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 86.8dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 6.25 |
| Spinorama Preference Score with Perfect Sub | 7.37 |
| Weight | 79.4 lbs (36 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- KEF Blade Two Meta vs GR-Research NX-Treme
- KEF Blade Two Meta vs MoFi SourcePoint V10 Master Edition
- KEF Blade Two Meta vs MoFi SourcePoint 888
- KEF Blade Two Meta vs Radiant Acoustics Clarity 66
- KEF Blade Two Meta vs Ascend Acoustics ELX Ribbon Tower
- KEF Blade Two Meta vs JBL HDI-3800
- KEF Blade Two Meta vs Revel F328Be
- KEF Blade Two Meta vs KEF R5 Meta
- See all 35 comparisons