PSB Imagine T65 vs Klipsch RP-6000F II

Last updated: October 9, 2026

Short answer: the PSB Imagine T65 on measured sound quality, the Klipsch RP-6000F II on price. The PSB Imagine T65 ranks #61 of 188 floorstanding speakers, rated 4.3/5, at $2,699. The Klipsch RP-6000F II ranks #115, rated 3.9/5, at $999.98, $1,699.02 cheaper.

PSB Imagine T65 vs Klipsch RP-6000F II

The PSB Imagine T65 is the better-sounding, deeper-bass choice. Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Its bass reaches about 47Hz before falling 3dB, against 67Hz for the Klipsch RP-6000F II. Watch for: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out.

What the Klipsch RP-6000F II does well: Highest power handling and clean, well-behaved compression at typical volumes. Watch for: Worse baffle-step coloration than the smaller Klipsch RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have: a real regression in tonal balance despite the higher price.

Buy the PSB Imagine T65 if sound quality matters more than the price. Buy the Klipsch RP-6000F II if the price matters more than sound quality.

Looking for alternatives? See the complete Passive Home rankings.

Specifications Side By Side

PSB Imagine T65 Klipsch RP-6000F II
Price$2,699 per pair$999.98 per pair
Ranked#61 of 188 in Large Size Floorstanding Speakers#115 of 188 in Large Size Floorstanding Speakers
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley1770Hz
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm)
Weight44.1 lbs (20 kg) each49.4 lbs (22.4 kg)
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity85.1dB (measured average, Erin’s Audio Corner)90dB (2.83V/1m, measured by Erin’s Audio Corner)
Recommended Power20-200W-
EnclosureVented: dual rear slot ports, individual woofer chambers-
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)67Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)33Hz (measured, Erin’s Audio Corner)
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)38Hz - 25kHz (+-3dB, Manufacturer specified)
Spinorama Preference Score5.295.74
Spinorama Preference Score with Perfect Sub6.517.47
DIY KitNoNo
Power Handling-125W continuous, 500W peak
Woofer Cabinet-ported, rear

More worthwhile head-to-heads for PSB Imagine T65:

Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

PSB Imagine T65: $2,699 per pair PSB Speakers eBay

PSB Imagine T65 ranking card

Same family: the PSB Imagine B50 (bookshelf, rated 3.7/5) and the PSB Imagine T54 (smaller floorstanding, ranked lower, estimated 4.2/5).

Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system: 100W drove it comfortably in Erin’s room. Measured bass extension of 47Hz (-3dB), with a measured sensitivity of 85.1dB.

Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.

Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley
DIY KitNo
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers
EnclosureVented: dual rear slot ports, individual woofer chambers
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)
Recommended Power20-200W
Sensitivity85.1dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score5.29
Spinorama Preference Score with Perfect Sub6.51
Weight44.1 lbs (20 kg) each

Klipsch RP-6000F II: $999.98 per pair Amazon eBay

Klipsch RP-6000F II ranking card

Same family: the Klipsch RP-500M II (smaller bookshelf, rated 4/5), the Klipsch RP-600M II (larger bookshelf, rated 3.7/5), the Klipsch RP-5000F II (smaller floorstanding, ranked higher, rated 4/5), the Klipsch RP-8000F II (larger floorstanding, ranked higher, rated 3.9/5), the Klipsch RP-404C II (smallest center, rated 3.7/5), the Klipsch RP-500C II (center, rated 3.9/5) and the Klipsch RP-504C II (largest center, rated 3.8/5).

Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Measured bass extension of 67Hz (-3dB), with a measured sensitivity of 90dB.

Cons: Worse baffle-step coloration than the smaller Klipsch RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have: a real regression in tonal balance despite the higher price. Bass extension is mixed (less deep at -3dB (67Hz) than the 5000F) and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).

Bass Extension (-10dB)33Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)67Hz (measured, Erin’s Audio Corner)
Crossover Frequency1770Hz
DIY KitNo
Dimensions39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm)
Drivers1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers
Frequency Response38Hz - 25kHz (+-3dB, Manufacturer specified)
Impedance8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner)
Power Handling125W continuous, 500W peak
Sensitivity90dB (2.83V/1m, measured by Erin’s Audio Corner)
Spinorama Preference Score5.74
Spinorama Preference Score with Perfect Sub7.47
Weight49.4 lbs (22.4 kg)
Woofer Cabinetported, rear