PSB Imagine T65 vs Revel F328Be

Last updated: October 1, 2026

Short answer: the Revel F328Be on measured sound quality, the PSB Imagine T65 on price. The Revel F328Be ranks #9 of 188 floorstanding speakers, rated 4.7/5, at $19,359.90. The PSB Imagine T65 ranks #61, rated 4.3/5, at $2,699, $16,660.90 cheaper.

PSB Imagine T65 vs Revel F328Be

The PSB Imagine T65 is the deeper-bass choice. Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Its bass reaches about 47Hz before falling 3dB, against 74Hz for the Revel F328Be. Watch for: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out.

The Revel F328Be is the more accurate choice. CEA2034 spinorama shows a quite flat on-axis response with superb directivity and efficiency above 90dB. Its measured preference score, a predictor of how neutral it sounds, is 6.40 against 5.29 for the PSB Imagine T65. Watch for: Vertical directivity is asymmetric: the reviewer recommends staying between -20 and +40 degrees relative to the tweeter axis, reflecting the driver layout of this three-way tower.

Buy the PSB Imagine T65 if the price is the priority over sound quality, or the Revel F328Be if sound quality is the priority over the price.

Want more options? Browse the full Passive Home rankings.

Specifications Side By Side

PSB Imagine T65 Revel F328Be
Price$2,699 per pair$19,359.90 per pair
Ranked#61 of 188 in Large Size Floorstanding Speakers#9 of 188 in Large Size Floorstanding Speakers
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofersThree 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley-
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm)
Weight44.1 lbs (20 kg) each112.4 lbs (51 kg) each
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)8 ohms nominal (3 ohms minimum, measured by Audio Science Review)
Sensitivity85.1dB (measured average, Erin’s Audio Corner)91dB (measured, Audio Science Review)
Recommended Power20-200W-
EnclosureVented: dual rear slot ports, individual woofer chambers-
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)74Hz (measured, Audio Science Review)
Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)39Hz (measured, Audio Science Review)
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)-
Spinorama Preference Score5.296.40
Spinorama Preference Score with Perfect Sub6.517.81
DIY KitNoNo
Woofer Cabinet-ported, rear

How Revel F328Be compares with other leading options:

Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

PSB Imagine T65: $2,699 per pair PSB Speakers eBay

PSB Imagine T65 ranking card

Same family: the PSB Imagine B50 (bookshelf, rated 3.7/5) and the PSB Imagine T54 (smaller floorstanding, ranked lower, estimated 4.2/5).

Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system: 100W drove it comfortably in Erin’s room. Measured bass extension of 47Hz (-3dB), with a measured sensitivity of 85.1dB.

Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.

Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley
DIY KitNo
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers
EnclosureVented: dual rear slot ports, individual woofer chambers
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)
Recommended Power20-200W
Sensitivity85.1dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score5.29
Spinorama Preference Score with Perfect Sub6.51
Weight44.1 lbs (20 kg) each

Revel F328Be: $19,359.90 per pair Crutchfield eBay

Revel F328Be ranking card

Same family: the Revel M126Be (bookshelf, rated 4.3/5), the Revel F226Be (smaller floorstanding, ranked lower, rated 4.6/5), the Revel F228Be (smaller floorstanding, ranked lower, rated 4.5/5) and the Revel C426Be (center, rated 4/5).

Pros: CEA2034 spinorama shows a quite flat on-axis response with superb directivity and efficiency above 90dB. Predicted in-room response is extremely accurate, with a smooth ~5dB downward slope from bass to treble that suits typical rooms without correction. Early reflections sum very nicely with the direct sound. Horizontal beamwidth of about ±70 degrees is wide and quite smooth. At 96dB SPL/1m distortion stays easily below the reviewer’s audibility threshold across nearly the whole range. Measured bass extension of 74Hz (-3dB), with a measured sensitivity of 91dB.

Cons: Vertical directivity is asymmetric: the reviewer recommends staying between -20 and +40 degrees relative to the tweeter axis, reflecting the driver layout of this three-way tower. Impedance dips to a minimum of 3 ohms with an additional resonance-driven phase swing, calling for an amplifier comfortable with a demanding load. Very expensive and very heavy (51 kg each).

Bass Extension (-10dB)39Hz (measured, Audio Science Review)
Bass Extension (-3dB)74Hz (measured, Audio Science Review)
DIY KitNo
Dimensions50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm)
DriversThree 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter
Impedance8 ohms nominal (3 ohms minimum, measured by Audio Science Review)
Sensitivity91dB (measured, Audio Science Review)
Spinorama Preference Score6.40
Spinorama Preference Score with Perfect Sub7.81
Weight112.4 lbs (51 kg) each
Woofer Cabinetported, rear