Short answer: the MoFi SourcePoint 888. It ranks #8 of 188 floorstanding speakers by sound quality, rated 4.7/5, at $5,495. The PSB Imagine T65 ranks #61, rated 4.3/5, at $2,699, $2,796 cheaper, a saving that is not big enough to make up the sound-quality gap.
Why pick the PSB Imagine T65: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. The tradeoff: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out.
The MoFi SourcePoint 888 is the more accurate, deeper-bass option. Three-way vented design: an 8” coaxial mid-range/1.25” dome tweeter driver plus two additional 8” woofers crossed at about 130Hz, giving genuinely full-range output (F3 34Hz, F10 26Hz) other than the deepest subsonic content. Its measured preference score, a predictor of how neutral it sounds, is 6.09 against 5.29 for the PSB Imagine T65. Its bass reaches about 34Hz before falling 3dB, against 47Hz for the PSB Imagine T65. Watch for: A significant investment, best ordered from a dealer with a good return policy.
Buy the MoFi SourcePoint 888. It is rated higher for sound quality, and the $2,796 you would save on the PSB Imagine T65 does not close the gap.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| PSB Imagine T65 | MoFi SourcePoint 888 | |
|---|---|---|
| Price | $2,699 per pair | $5495 per pair |
| Ranked | #61 of 188 in Large Size Floorstanding Speakers | #8 of 188 in Large Size Floorstanding Speakers |
| Drivers | 1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers | Dual 8” paper cone woofers, 8” Paper Cone midrange, 1.25” wide roll soft dome tweeter |
| Crossover Frequency | 600Hz & 2000Hz, 4th-order Linkwitz-Riley | - |
| Dimensions | 38.8” x 8.4” x 13.5” (986 x 213 x 343 mm) | 41.2”H x 12.6”W x 16.1”D (1046.5 x 320 x 408.9 mm) |
| Weight | 44.1 lbs (20 kg) each | 94.8 lbs (43 kg) each |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum) | 6 ohms nominal, 5 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 85.1dB (measured average, Erin’s Audio Corner) | 85.6dB (measured, Erin’s Audio Corner) |
| Recommended Power | 20-200W | - |
| Enclosure | Vented: dual rear slot ports, individual woofer chambers | - |
| Bass Extension (-3dB) | 47Hz (measured average, Erin’s Audio Corner) | 34Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 26Hz (measured average, Erin’s Audio Corner) | 26Hz (measured, Erin’s Audio Corner) |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) | - |
| Spinorama Preference Score | 5.29 | 6.09 |
| Spinorama Preference Score with Perfect Sub | 6.51 | 7.21 |
| DIY Kit | No | No |
| Woofer Cabinet | - | ported, rear |
Related Speaker Comparisons
More top alternatives to MoFi SourcePoint 888:
- GR-Research NX-Treme vs MoFi SourcePoint 888
- KEF Blade Two Meta vs MoFi SourcePoint 888
- MoFi SourcePoint 888 vs MoFi SourcePoint V10 Master Edition
- MoFi SourcePoint 888 vs Revel F328Be
- Radiant Acoustics Clarity 66 vs MoFi SourcePoint 888
Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
PSB Imagine T65: $2,699 per pair PSB Speakers eBay
Same family: the PSB Imagine B50 (bookshelf, rated 3.7/5) and the PSB Imagine T54 (smaller floorstanding, ranked lower, estimated 4.2/5).
Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system: 100W drove it comfortably in Erin’s room. Measured bass extension of 47Hz (-3dB), with a measured sensitivity of 85.1dB.
Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.
Full PSB Imagine T65 review and specifications →
| Bass Extension (-10dB) | 26Hz (measured average, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 47Hz (measured average, Erin’s Audio Corner) |
| Crossover Frequency | 600Hz & 2000Hz, 4th-order Linkwitz-Riley |
| DIY Kit | No |
| Dimensions | 38.8” x 8.4” x 13.5” (986 x 213 x 343 mm) |
| Drivers | 1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers |
| Enclosure | Vented: dual rear slot ports, individual woofer chambers |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum) |
| Recommended Power | 20-200W |
| Sensitivity | 85.1dB (measured average, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.29 |
| Spinorama Preference Score with Perfect Sub | 6.51 |
| Weight | 44.1 lbs (20 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- PSB Imagine T65 vs Polk Audio Reserve R700
- PSB Imagine T65 vs JBL HDI-3600
- PSB Imagine T65 vs JBL Studio 698
- PSB Imagine T65 vs Emotiva Airmotiv T2+
- PSB Imagine T65 vs ELAC Debut 3.0 DF63
- PSB Imagine T65 vs Polk Reserve R500
- PSB Imagine T65 vs Arendal 1961 Tower
- PSB Imagine T65 vs Infinity Primus 360
- See all 41 comparisons
MoFi SourcePoint 888: $5495 per pair Crutchfield eBay
Same family: the MoFi SourcePoint 8 (smaller bookshelf, rated 4.5/5) and the MoFi SourcePoint 10 (larger bookshelf, rated 4.4/5).
Pros: Three-way vented design: an 8” coaxial mid-range/1.25” dome tweeter driver plus two additional 8” woofers crossed at about 130Hz, giving genuinely full-range output (F3 34Hz, F10 26Hz) other than the deepest subsonic content. Ranked by the reviewer among his personal top three speakers out of roughly 200 tested, alongside the KEF Blade Two Meta and Dutch & Dutch 8C, despite costing a small fraction of either. Excellent compression/dynamic-range linearity, holding its own against much pricier speakers like the March Audio Sointuva AWG, KEF Reference 1 Meta, and KEF Blade Two Meta. On-axis (0°) and 30°-off-axis estimated in-room responses track within about 1-1.5dB of each other above 500Hz, so tonal balance barely changes with placement or listening angle: excellent for multi-seat home theater or entertaining. Wide horizontal dispersion of about ±60°. Distortion stays low: under 1% at 86dB, and under 1% above 200Hz even at 96dB, with multitone distortion mostly under 1% as well. Not a difficult amplifier load (5-ohm minimum impedance, 4.2-ohm minimum EPDR). Checks the three boxes the reviewer considers essential for a home theater speaker: low compression, low distortion, and excellent directivity. Measured bass extension of 34Hz (-3dB), with a measured sensitivity of 85.6dB.
Cons: A significant investment, best ordered from a dealer with a good return policy. Large and heavy floorstander (about 96 lbs, 42” tall) requiring real floor space and rear clearance. Positioning is fairly specific: needs about 2 feet from the rear wall. Closer causes boominess in the 40-50Hz region, farther loses bass extension. Vertical dispersion (about ±50°) is narrower than horizontal (about ±60°), since the two 8” woofers are spaced vertically apart on a tower cabinet, causing some vertical mismatch at lower frequencies. A small on-axis dip around 500Hz and a deliberately lower tweeter level (about 0.5dB below the midrange) are intentional design choices for smoother in-room response, but mean the raw on-axis measurement isn’t perfectly flat. A mild diffraction-related dip appears around 3kHz in directivity measurements. Toeing the speaker out more than about 10° starts to noticeably reduce top-end energy.
Full MoFi SourcePoint 888 review and specifications →
| Bass Extension (-10dB) | 26Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 34Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 41.2”H x 12.6”W x 16.1”D (1046.5 x 320 x 408.9 mm) |
| Drivers | Dual 8” paper cone woofers, 8” Paper Cone midrange, 1.25” wide roll soft dome tweeter |
| Impedance | 6 ohms nominal, 5 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 85.6dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 6.09 |
| Spinorama Preference Score with Perfect Sub | 7.21 |
| Weight | 94.8 lbs (43 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- MoFi SourcePoint 888 vs Revel F328Be
- MoFi SourcePoint 888 vs Radiant Acoustics Clarity 66
- MoFi SourcePoint 888 vs MoFi SourcePoint V10 Master Edition
- MoFi SourcePoint 888 vs Ascend Acoustics ELX Ribbon Tower
- MoFi SourcePoint 888 vs KEF Blade Two Meta
- MoFi SourcePoint 888 vs GR-Research NX-Treme
- MoFi SourcePoint 888 vs KEF R5 Meta
- MoFi SourcePoint 888 vs Revel F226Be
- See all 37 comparisons