Short answer: the Focal Theva N°2, if you are buying new. The Focal Chora 816 ranks higher than the Klipsch RP-6000F II (#26 vs #115 of 188 floorstanding speakers) but is discontinued; its replacement, the Focal Theva N°2, is rated 4.4/5 at $999 and is still sold new.
The Focal Chora 816 is the better-sounding, deeper-bass option. CEA2034 spinorama shows a generally even on-axis response with nice bass extension and high sensitivity. Its bass reaches about 60Hz before falling 3dB, against 67Hz for the Klipsch RP-6000F II. The catch: Some messiness appears between 500Hz-2kHz on-axis, including a dip around 550Hz.
The Klipsch RP-6000F II is the more accurate choice. Highest power handling and clean, well-behaved compression at typical volumes. Its measured preference score, a predictor of how neutral it sounds, is 5.74 against 4.30 for the Focal Chora 816. Watch for: Worse baffle-step coloration than the smaller Klipsch RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have: a real regression in tonal balance despite the higher price.
Buy the Focal Theva N°2, the replacement for the discontinued Focal Chora 816; it is rated higher for sound quality than the Klipsch RP-6000F II.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Focal Chora 816 | Klipsch RP-6000F II | |
|---|---|---|
| Price | $900 per pair used, Discontinued | $999.98 per pair |
| Ranked | #26 of 188 in Large Size Floorstanding Speakers | #115 of 188 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 35Hz (measured, Audio Science Review) | 33Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) | 67Hz (measured, Erin’s Audio Corner) |
| Dimensions | 40.7”H x 11.8”W x 15.3”D (1033.8 x 299.7 x 388.6 mm) | 39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm) |
| Impedance | 8 ohms nominal (3.9 ohms minimum, measured, Audio Science Review) | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) |
| Drivers | 6.5” (16.5cm) Slatefiber woofer, 6.5” (16.5cm) Slatefiber midrange, 1” (25mm) TNF Al/Mg inverted dome tweeter | 1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers |
| Sensitivity | 91dB (measured, Audio Science Review) | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Weight | 40.8 lbs (18.5 kg) each | 49.4 lbs (22.4 kg) |
| Woofer Cabinet | ported, front | ported, rear |
| Spinorama Preference Score | 4.30 | 5.74 |
| Spinorama Preference Score with Perfect Sub | 6.37 | 7.47 |
| DIY Kit | No | No |
| Frequency Response | - | 38Hz - 25kHz (+-3dB, Manufacturer specified) |
| Crossover Frequency | - | 1770Hz |
| Power Handling | - | 125W continuous, 500W peak |
Related Speaker Comparisons
More worthwhile head-to-heads for Focal Chora 816:
- KEF Blade Two Meta vs Focal Chora 816
- Focal Chora 816 vs MoFi SourcePoint 888
- Revel F328Be vs Focal Chora 816
- KEF R5 Meta vs Focal Chora 816
- Revel F226Be vs Focal Chora 816
Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Focal Chora 816: $900 per pair used Discontinued eBay
Newer model: the Focal Theva N°2, ranked lower, estimated 4.4/5.
Pros: CEA2034 spinorama shows a generally even on-axis response with nice bass extension and high sensitivity. Predicted in-room response is very good aside from a peak around 8kHz. Horizontal beamwidth of about ±60 degrees is typical and fairly controlled. Distortion is very low at 86dB SPL/1m and still usable at 96dB SPL/1m. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 91dB.
Cons: Some messiness appears between 500Hz-2kHz on-axis, including a dip around 550Hz. Vertical directivity narrows a little, so listening height matters more than with a coincident design. Cumulative spectral decay (waterfall) shows a fair bit of resonances lingering across the midrange. Distortion rises substantially in the 1-2kHz region at 96dB SPL/1m. Minimum impedance dips to about 3.9 ohms. Discontinued.
Full Focal Chora 816 review and specifications →
| Bass Extension (-10dB) | 35Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 40.7”H x 11.8”W x 15.3”D (1033.8 x 299.7 x 388.6 mm) |
| Drivers | 6.5” (16.5cm) Slatefiber woofer, 6.5” (16.5cm) Slatefiber midrange, 1” (25mm) TNF Al/Mg inverted dome tweeter |
| Impedance | 8 ohms nominal (3.9 ohms minimum, measured, Audio Science Review) |
| Sensitivity | 91dB (measured, Audio Science Review) |
| Spinorama Preference Score | 4.30 |
| Spinorama Preference Score with Perfect Sub | 6.37 |
| Weight | 40.8 lbs (18.5 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Klipsch RP-6000F II: $999.98 per pair Amazon eBay
Same family: the Klipsch RP-500M II (smaller bookshelf, rated 4/5), the Klipsch RP-600M II (larger bookshelf, rated 3.7/5), the Klipsch RP-5000F II (smaller floorstanding, ranked higher, rated 4/5), the Klipsch RP-8000F II (larger floorstanding, ranked higher, rated 3.9/5), the Klipsch RP-404C II (smallest center, rated 3.7/5), the Klipsch RP-500C II (center, rated 3.9/5) and the Klipsch RP-504C II (largest center, rated 3.8/5).
Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Measured bass extension of 67Hz (-3dB), with a measured sensitivity of 90dB.
Cons: Worse baffle-step coloration than the smaller Klipsch RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have: a real regression in tonal balance despite the higher price. Bass extension is mixed (less deep at -3dB (67Hz) than the 5000F) and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).
Full Klipsch RP-6000F II review and specifications →
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 67Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 1770Hz |
| DIY Kit | No |
| Dimensions | 39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm) |
| Drivers | 1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers |
| Frequency Response | 38Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) |
| Power Handling | 125W continuous, 500W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Spinorama Preference Score | 5.74 |
| Spinorama Preference Score with Perfect Sub | 7.47 |
| Weight | 49.4 lbs (22.4 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-6000F II vs Dynaudio Emit 30
- Klipsch RP-6000F II vs Klipsch RP-8000F II
- Klipsch RP-6000F II vs Definitive Technology BP-9020
- Klipsch RP-6000F II vs Klipsch RP-5000F II
- Klipsch RP-6000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-6000F II vs Polk T50
- Klipsch RP-6000F II vs KEF Q11 Meta
- Klipsch RP-6000F II vs Klipsch Forte IV
- See all 41 comparisons