Short answer: the Klipsch RP-6000F II for an easy amplifier load, the Magnepan LRS+ only with serious power behind it. The RP-6000F II ranks #51 of 74 floorstanding speakers at $1,500 and handles power cleanly, though it has worse baffle-step coloration than the RP-5000F II and a sibilance issue. The LRS+ is a 48-inch-tall, 1-inch-deep planar-magnetic dipole that is extremely current-hungry: even a pair of 600W Macintosh monoblocks averaged only about 90dB.
Buy the Klipsch RP-6000F II. It is rated higher for sound quality, and the $200 you would save on the Magnepan LRS+ does not close the gap.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Klipsch RP-6000F II | Magnepan LRS+ | |
|---|---|---|
| Price | $1500 per pair | $1300 per pair |
| Ranked | #51 of 74 in Large Size Floorstanding Speakers | #61 of 74 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) | 67Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 67Hz (measured, Erin’s Audio Corner) | 74Hz (measured, Erin’s Audio Corner) |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) | 85.1dB (measured, Erin’s Audio Corner) |
| Drivers | 1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers | Full-range planar magnetic dipole panel (48” tall x 13.5” wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Weight | 49.4 lbs (22.4 kg) | 30 lbs (13.6 kg) |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) | 4 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner) |
| Frequency Response | 38Hz - 25kHz (+-3dB, Manufacturer specified) | - |
| Crossover Frequency | 1770Hz | - |
| Power Handling | 125W continuous, 500W peak | - |
| Dimensions | 39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm) | 48”H x 13.5”W x 1”D (1219.2 x 342.9 x 25.4 mm) |
| Woofer Cabinet | ported, rear | open baffle |
| Spinorama Preference Score | 5.74 | 1.27 |
| Spinorama Preference Score with Perfect Sub | 7.47 | 4.32 |
| DIY Kit | No | No |
Related Speaker Comparisons
More top alternatives to Klipsch RP-6000F II:
- Klipsch RP-6000F II vs KEF Blade Two Meta
- Klipsch RP-6000F II vs MoFi SourcePoint V10 Master Edition
- Klipsch RP-6000F II vs MoFi SourcePoint 888
- Revel F328Be vs Klipsch RP-6000F II
- Klipsch RP-6000F II vs Radiant Acoustics Clarity 66
Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-6000F II: $1500 per pair Amazon eBay
Pros: Highest power handling and clean, well-behaved compression at typical volumes. Precise imaging from the controlled horn directivity. Measured bass extension of 67Hz (-3dB), with a measured sensitivity of 90dB.
Cons: Worse baffle-step coloration than the smaller RP-5000F II (3-4dB swing vs 2dB), plus a sibilance issue the 5000F doesn’t have: a real regression in tonal balance despite the higher price. Bass extension is mixed (less deep at -3dB (67Hz) than the 5000F) and needs a subwoofer regardless. Narrow horizontal dispersion (~50-60 degrees).
Full Klipsch RP-6000F II review and specifications →
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 67Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 1770Hz |
| DIY Kit | No |
| Dimensions | 39.6” x 9.3” x 17.6” (1006 x 236 x 446 mm) |
| Drivers | 1” titanium tweeter with Tractrix horn, dual 6.5” cerametallic woofers |
| Frequency Response | 38Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) |
| Power Handling | 125W continuous, 500W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Spinorama Preference Score | 5.74 |
| Spinorama Preference Score with Perfect Sub | 7.47 |
| Weight | 49.4 lbs (22.4 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-6000F II vs Dynaudio Emit 30
- Klipsch RP-6000F II vs Definitive Technology BP-9020
- Klipsch RP-6000F II vs Klipsch RP-8000F II
- Klipsch RP-6000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-6000F II vs Polk T50
- Klipsch RP-6000F II vs Klipsch RP-5000F II
- Klipsch RP-6000F II vs Focal Aria Evo X N°2
- Klipsch RP-6000F II vs KEF Q11 Meta
- See all 41 comparisons
Magnepan LRS+: $1300 per pair Magnepan eBay
Pros: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Delivers a uniquely dramatic and enveloping soundstage with genuinely three-dimensional depth effects that work across all music genres, not just classical or orchestral material as commonly assumed. Extremely tight, locked-in center-phantom imaging when set up correctly. Open-baffle design avoids the “boxy” enclosure coloration of conventional cabinet speakers. Multitone distortion is remarkably consistent from low to high frequency, a characteristic the reviewer hasn’t observed in conventional cone-and-dome speakers. Compression at high output stays modest (about 0.5-1dB) through the midrange and treble, giving roughly 20-26dB of usable dynamic range in that region. At its price, a strong contender for a dedicated secondary listening room, even if not a main-system replacement. Measured bass extension of 74Hz (-3dB), with a measured sensitivity of 85.1dB.
Cons: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output. A robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it. Bass rolls off very quickly (F3 74Hz, F10 67Hz, described as falling off “like a rock”), making a subwoofer an absolute requirement for any low-end content. A roughly 3dB dip in the mid-bass (100-300Hz) region thins out vocal body and fullness compared to a conventional bookshelf speaker. A resonance/bump around 400Hz adds a mild boxy quality, though it responds well to about 2dB of EQ correction. Extraordinarily fussy about exact positioning: both seating height (must align with the acoustic reference point between the panel’s lower tie-down points) and horizontal aiming are unusually critical; moving just a couple of inches can cause treble content above roughly 500-600Hz to nearly vanish. Distinct off-axis cancellation zones exist directly to the sides of the panel, where very little sound is audible at all. Fails badly under extreme dynamic-transient testing in the bass, and the reviewer blew fuses pushing the speaker during testing: not built for high-volume or highly dynamic playback. A genuinely different category from conventional hi-fi speakers, requiring more setup patience and experimentation than a typical monopole design.
Full Magnepan LRS+ review and specifications →
| Bass Extension (-10dB) | 67Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 74Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 48”H x 13.5”W x 1”D (1219.2 x 342.9 x 25.4 mm) |
| Drivers | Full-range planar magnetic dipole panel (48” tall x 13.5” wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Impedance | 4 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 85.1dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 1.27 |
| Spinorama Preference Score with Perfect Sub | 4.32 |
| Weight | 30 lbs (13.6 kg) |
| Woofer Cabinet | open baffle |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Magnepan LRS+ vs Infinity Reference 253
- Magnepan LRS+ vs JBL Stage 2 280F
- Magnepan LRS+ vs Polk Audio XT60
- Magnepan LRS+ vs Focal Aria Evo X N°2
- Magnepan LRS+ vs Sony SS-CS3
- Magnepan LRS+ vs Polk T50
- Magnepan LRS+ vs JBL Studio 590
- Magnepan LRS+ vs Definitive Technology BP-9020
- See all 38 comparisons