Short answer: the JBL 4367 for better sound quality, the PSB Imagine T65 for the lower price. The JBL 4367 ranks #12 of 71 floorstanding speakers at $16500. The PSB Imagine T65 ranks #34 at $2699, $13801 cheaper.
What the PSB Imagine T65 offers: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2,699 tower - among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system - 100W drove it comfortably in Erin’s room. Watch for: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.
What the JBL 4367 offers: Three-way design pairing a 15” front-ported woofer with a compression driver on a controlled-dispersion horn/waveguide, crossed over at 700Hz. On-axis frequency response is nearly dead flat, holding within about ±1.5dB, with the listening window tracking it closely except right at the crossover. Distortion stays below 1% THD across the entire audible band at both 86dB and 96dB. Compression/dynamic-range linearity is exceptional - within about a quarter of a dB from 76dB to 102dB, among the best the reviewer has measured. High sensitivity (about 92.6dB average) eases the amplifier match despite the speaker’s size. Minimal rear radiation thanks to the 15” woofer’s directivity and front-firing ports - rear energy runs about 20dB down from the primary wavefront, giving it a near-cardioid radiation pattern. Well-controlled horn directivity keeps the soundstage from noticeably shifting in width across the 700Hz crossover region. A natural high-frequency rolloff above about 7-8kHz gives it an easy, non-fatiguing character for extended listening sessions. Watch for: At roughly $16,500/pair, this is a major investment - the reviewer recommends buying from a dealer with a liberal return policy. Vertical response shows dips beyond about ±10-20°, with a larger null further out - an inherent trade-off of mating a 15” woofer to a horn compression driver at a 700Hz crossover, since crossing lower would hurt power handling and dynamic range. Horizontal directivity isn’t perfectly consistent with frequency: narrow (about ±20°) through 200-800Hz, briefly widening to near ±50° above the crossover, then narrowing again at high frequency - an unusual, non-constant pattern. The high-frequency rolloff that gives it an easy-listening character also reduces the sense of air and space in the soundstage when listening from off-center seats. Massive and heavy (about 120 lbs, roughly 36-37” tall) - needs to be raised on a stand to bring the horn to ear level, and isn’t something one person easily moves alone. Only modest EQ adjustment is available on the speaker itself (about ±1-2dB bass/treble trim).
Buy the PSB Imagine T65 if the price matters more than sound quality. Buy the JBL 4367 if sound quality matters more than the price.
Specifications Side By Side
| PSB Imagine T65 | JBL 4367 | |
|---|---|---|
| Price | $2,699 | $16500 |
| Ranked | #34 of 71 in Large Size Floorstanding Speakers | #12 of 71 in Large Size Floorstanding Speakers |
| Drivers | 1" titanium dome tweeter, 5.25" woven carbon fiber midrange, 2x 6.5" woven carbon fiber woofers | 15" (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3" (75mm) D2430K dual compression tweeter |
| Crossovers | 600Hz & 2000Hz, 4th-order Linkwitz-Riley | - |
| Dimensions | 38-13/16"H x 8-3/8"W x 13.5"D (986 x 213 x 343mm) | 37.2"H x 22.2"W x 16.8"D (944.9 x 563.9 x 426.7 mm) |
| Weight | 44 lbs each | 119 lbs / 54 kg each |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum) | 4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Sensitivity | 85.1dB (measured average, Erin’s Audio Corner) | 92.5dB (measured average, Erin’s Audio Corner) |
| Recommended Power | 20-200W | - |
| Bass Reflex | Dual rear slot ports, individual woofer chambers | - |
| Bass Extension (-3dB) | 47Hz (measured average, Erin’s Audio Corner) | 43Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 26Hz (measured average, Erin’s Audio Corner) | 31Hz (measured, Erin’s Audio Corner) |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) | - |
| Woofer Cabinet | - | ported, front |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Revel F226Be vs PS Audio Aspen FR10
- Revel F328Be vs KEF Reference 203
- Revel F328Be vs Revel F226Be
- KEF R5 vs JBL 4367
- JBL 4367 vs Revel F208
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
PSB Imagine T65: $2,699 The Audio Factory eBay
Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2,699 tower - among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system - 100W drove it comfortably in Erin’s room.
Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.
Full PSB Imagine T65 review and specifications →
| Bass Extension (-10dB) | 26Hz (measured average, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 47Hz (measured average, Erin's Audio Corner) |
| Bass Reflex | Dual rear slot ports, individual woofer chambers |
| Crossovers | 600Hz & 2000Hz, 4th-order Linkwitz-Riley |
| Dimensions | 38-13/16"H x 8-3/8"W x 13.5"D (986 x 213 x 343mm) |
| Drivers | 1" titanium dome tweeter, 5.25" woven carbon fiber midrange, 2x 6.5" woven carbon fiber woofers |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin's Audio Corner; manufacturer specifies 4 ohms minimum) |
| Recommended Power | 20-200W |
| Sensitivity | 85.1dB (measured average, Erin's Audio Corner) |
| Weight | 44 lbs each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- PSB Imagine T65 vs Q Acoustics 5040
- PSB Imagine T65 vs ELAC Debut 3.0 DF63
- PSB Imagine T65 vs Polk Audio Reserve R700
- PSB Imagine T65 vs Polk Reserve R500
- PSB Imagine T65 vs Emotiva Airmotiv T2+
- PSB Imagine T65 vs Definitive Technology BP-9020
- PSB Imagine T65 vs JBL HDI-3600
- PSB Imagine T65 vs Infinity Primus 360
- See all 41 comparisons
JBL 4367: $16500 eBay
Pros: Three-way design pairing a 15” front-ported woofer with a compression driver on a controlled-dispersion horn/waveguide, crossed over at 700Hz. On-axis frequency response is nearly dead flat, holding within about ±1.5dB, with the listening window tracking it closely except right at the crossover. Distortion stays below 1% THD across the entire audible band at both 86dB and 96dB. Compression/dynamic-range linearity is exceptional - within about a quarter of a dB from 76dB to 102dB, among the best the reviewer has measured. High sensitivity (about 92.6dB average) eases the amplifier match despite the speaker’s size. Minimal rear radiation thanks to the 15” woofer’s directivity and front-firing ports - rear energy runs about 20dB down from the primary wavefront, giving it a near-cardioid radiation pattern. Well-controlled horn directivity keeps the soundstage from noticeably shifting in width across the 700Hz crossover region. A natural high-frequency rolloff above about 7-8kHz gives it an easy, non-fatiguing character for extended listening sessions.
Cons: At roughly $16,500/pair, this is a major investment - the reviewer recommends buying from a dealer with a liberal return policy. Vertical response shows dips beyond about ±10-20°, with a larger null further out - an inherent trade-off of mating a 15” woofer to a horn compression driver at a 700Hz crossover, since crossing lower would hurt power handling and dynamic range. Horizontal directivity isn’t perfectly consistent with frequency: narrow (about ±20°) through 200-800Hz, briefly widening to near ±50° above the crossover, then narrowing again at high frequency - an unusual, non-constant pattern. The high-frequency rolloff that gives it an easy-listening character also reduces the sense of air and space in the soundstage when listening from off-center seats. Massive and heavy (about 120 lbs, roughly 36-37” tall) - needs to be raised on a stand to bring the horn to ear level, and isn’t something one person easily moves alone. Only modest EQ adjustment is available on the speaker itself (about ±1-2dB bass/treble trim).
Full JBL 4367 review and specifications →
| Bass Extension (-10dB) | 31Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 43Hz (measured, Erin's Audio Corner) |
| Dimensions | 37.2"H x 22.2"W x 16.8"D (944.9 x 563.9 x 426.7 mm) |
| Drivers | 15" (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3" (75mm) D2430K dual compression tweeter |
| Impedance | 4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin's Audio Corner) |
| Sensitivity | 92.5dB (measured average, Erin's Audio Corner) |
| Weight | 119 lbs / 54 kg each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons