Short answer: it depends on how much you want the JBL’s horn sound. The JBL 4367 pairs a 15” front-ported woofer with a compression driver on a controlled-dispersion horn crossed over at 700Hz, but at roughly $16,500 a pair it is a major investment, and the reviewer recommends buying from a dealer with a liberal return policy. The Revel F328Be counters with a quite flat on-axis response, superb directivity and efficiency above 90dB.
Buy the Revel F328Be. It is rated higher for sound quality; the JBL 4367 is no longer sold new.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Revel F328Be | JBL 4367 | |
|---|---|---|
| Price | $19,359.90 per pair | $16,500 per pair Discontinued |
| Ranked | #5 of 74 in Large Size Floorstanding Speakers | #11 of 74 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 39Hz (measured, Audio Science Review) | 31Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 74Hz (measured, Audio Science Review) | 43Hz (measured, Erin’s Audio Corner) |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) | 37.2”H x 22.2”W x 16.8”D (944.9 x 563.9 x 426.7 mm) |
| Impedance | 8 ohms nominal (3 ohms minimum, measured by Audio Science Review) | 4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Drivers | Three 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter | 15” (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3” (75mm) D2430K dual compression tweeter |
| Sensitivity | 91dB (measured, Audio Science Review) | 92.5dB (measured average, Erin’s Audio Corner) |
| Weight | 112.4 lbs (51 kg) each | 119 lbs (54 kg) each |
| Woofer Cabinet | ported, rear | ported, front |
| Spinorama Preference Score | 6.40 | 5.07 |
| Spinorama Preference Score with Perfect Sub | 7.81 | 6.88 |
| DIY Kit | No | No |
Related Speaker Comparisons
How Revel F328Be compares with other leading options:
- GR-Research NX-Treme vs Revel F328Be
- KEF Blade Two Meta vs Revel F328Be
- MoFi SourcePoint V10 Master Edition vs Revel F328Be
- MoFi SourcePoint 888 vs Revel F328Be
- Radiant Acoustics Clarity 66 vs Revel F328Be
Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel F328Be: $19,359.90 per pair Crutchfield eBay
Pros: CEA2034 spinorama shows a quite flat on-axis response with superb directivity and efficiency above 90dB. Predicted in-room response is extremely accurate, with a smooth ~5dB downward slope from bass to treble that suits typical rooms without correction. Early reflections sum very nicely with the direct sound. Horizontal beamwidth of about ±70 degrees is wide and quite smooth. At 96dB SPL/1m distortion stays easily below the reviewer’s audibility threshold across nearly the whole range. Measured bass extension of 74Hz (-3dB), with a measured sensitivity of 91dB.
Cons: Vertical directivity is asymmetric: the reviewer recommends staying between -20 and +40 degrees relative to the tweeter axis, reflecting the driver layout of this three-way tower. Impedance dips to a minimum of 3 ohms with an additional resonance-driven phase swing, calling for an amplifier comfortable with a demanding load. Very expensive and very heavy (51 kg each).
Full Revel F328Be review and specifications →
| Bass Extension (-10dB) | 39Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 74Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) |
| Drivers | Three 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter |
| Impedance | 8 ohms nominal (3 ohms minimum, measured by Audio Science Review) |
| Sensitivity | 91dB (measured, Audio Science Review) |
| Spinorama Preference Score | 6.40 |
| Spinorama Preference Score with Perfect Sub | 7.81 |
| Weight | 112.4 lbs (51 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Revel F328Be vs MoFi SourcePoint 888
- Revel F328Be vs Radiant Acoustics Clarity 66
- Revel F328Be vs MoFi SourcePoint V10 Master Edition
- Revel F328Be vs Ascend Acoustics ELX Ribbon Tower
- Revel F328Be vs KEF Blade Two Meta
- Revel F328Be vs GR-Research NX-Treme
- Revel F328Be vs KEF R5 Meta
- Revel F328Be vs Revel F226Be
- See all 39 comparisons
JBL 4367: $16,500 per pair Discontinued eBay
Newer model: the JBL 4369. It’s likely to perform similarly, though we don’t have measurements to confirm that yet.
Pros: Three-way design pairing a 15” front-ported woofer with a compression driver on a controlled-dispersion horn/waveguide, crossed over at 700Hz. On-axis frequency response is nearly dead flat, holding within about ±1.5dB, with the listening window tracking it closely except right at the crossover. Distortion stays below 1% THD across the entire audible band at both 86dB and 96dB. Compression/dynamic-range linearity is exceptional: within about a quarter of a dB from 76dB to 102dB, among the best the reviewer has measured. High sensitivity (about 92.6dB average) eases the amplifier match despite the speaker’s size. Minimal rear radiation thanks to the 15” woofer’s directivity and front-firing ports: rear energy runs about 20dB down from the primary wavefront, giving it a near-cardioid radiation pattern. Well-controlled horn directivity keeps the soundstage from noticeably shifting in width across the 700Hz crossover region. A natural high-frequency rolloff above about 7-8kHz gives it an easy, non-fatiguing character for extended listening sessions. Measured bass extension of 43Hz (-3dB), with a measured sensitivity of 92.5dB.
Cons: At roughly $16500/pair, this is a major investment: the reviewer recommends buying from a dealer with a liberal return policy. Vertical response shows dips beyond about ±10-20°, with a larger null further out: an inherent trade-off of mating a 15” woofer to a horn compression driver at a 700Hz crossover, since crossing lower would hurt power handling and dynamic range. Horizontal directivity isn’t perfectly consistent with frequency: narrow (about ±20°) through 200-800Hz, briefly widening to near ±50° above the crossover, then narrowing again at high frequency. An unusual, non-constant pattern. The high-frequency rolloff that gives it an easy-listening character also reduces the sense of air and space in the soundstage when listening from off-center seats. Massive and heavy (about 120 lbs, roughly 36-37” tall): needs to be raised on a stand to bring the horn to ear level, and isn’t something one person easily moves alone. Only modest EQ adjustment is available on the speaker itself (about ±1-2dB bass/treble trim). Discontinued.
Full JBL 4367 review and specifications →
| Bass Extension (-10dB) | 31Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 43Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 37.2”H x 22.2”W x 16.8”D (944.9 x 563.9 x 426.7 mm) |
| Drivers | 15” (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3” (75mm) D2430K dual compression tweeter |
| Impedance | 4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Sensitivity | 92.5dB (measured average, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.07 |
| Spinorama Preference Score with Perfect Sub | 6.88 |
| Weight | 119 lbs (54 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons