Short answer: the KEF R5 Meta for better sound quality, the Klipsch RP-5000F II for the lower price. The KEF R5 Meta ranks #9 of 71 floorstanding speakers at $3999.99. The Klipsch RP-5000F II ranks #48 at $1199.98, $2800.01 cheaper.
What the Klipsch RP-5000F II offers: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity. Watch for: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
What the KEF R5 Meta offers: 12th generation 5” Uni-Q coaxial driver array with Metamaterial Absorption Technology (MAT) delivers remarkably smooth, controlled horizontal (±50°) and vertical directivity with near-identical off-axis tracking. Exceptional frequency response linearity through the midrange and treble that takes extremely well to minor parametric EQ adjustments. Constrained Layer Damping cabinet construction and flexible rear ports minimize enclosure resonances and port turbulence. Deliberately tuned low-frequency roll-off profile permits boundary-adjacent room placement near front walls without boomy acoustic buildup. Watch for: Low-frequency extension (F3 of 52Hz, F10 of 38Hz) requires pairing with a dedicated subwoofer crossed over at 80Hz for high-output home theater or bass-heavy music performance. High-frequency radiation above 7kHz shows a mild on-axis taper (1-2dB downward slope), performing best when listened to 10-20° off-axis. Moderate sensitivity (~86dB SPL average) requires a clean, robust 4-ohm capable amplifier to drive high dynamic peaks without clipping.
Buy the Klipsch RP-5000F II if the price matters more than sound quality. Buy the KEF R5 Meta if sound quality matters more than the price.
Specifications Side By Side
| Klipsch RP-5000F II | KEF R5 Meta | |
|---|---|---|
| Price | $1199.98 | $3,999.99 Discontinued |
| Ranked | #48 of 71 in Large Size Floorstanding Speakers | #9 of 71 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 38Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 55Hz (measured, Erin’s Audio Corner) | 52Hz (measured, Erin’s Audio Corner) |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) | 86dB (measured average, Erin’s Audio Corner) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers | 1 in. vented aluminum dome tweeter with MAT, 5 in. aluminum cone midrange, two 5.25 in. hybrid aluminum cone woofers |
| Weight | 38.6 lbs / 17.5 kg | 54 lbs / 24.5 kg each |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) | 4 ohms nominal |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) | - |
| Crossover Frequency | 1900Hz | - |
| Output Power | 100W continuous, 400W peak | - |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) | 42.2"H x 10.7"W x 13.6"D (1073 x 273 x 346 mm) |
| Woofer Cabinet | ported, rear | ported, rear |
| Discontinued | - | Yes |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- PSB Imagine T65 vs SVS Ultra Evolution Pinnacle
- Focal Aria Evo X N°2 vs KEF R5
- KEF R5 vs Revel F208
- Polk Audio Reserve R700 vs KEF R5 Meta
- Q Acoustics 5040 vs KEF R5 Meta
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-5000F II: $1199.98 Amazon eBay
Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity.
Cons: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Full Klipsch RP-5000F II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1900Hz |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin's Audio Corner) |
| Output Power | 100W continuous, 400W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) |
| Weight | 38.6 lbs / 17.5 kg |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-5000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-5000F II vs KEF Q11 Meta
- Klipsch RP-5000F II vs Monolith THX-365T
- Klipsch RP-5000F II vs Klipsch RP-8000F II
- Klipsch RP-5000F II vs Klipsch Heresy IV
- Klipsch RP-5000F II vs Dynaudio Emit 30
- Klipsch RP-5000F II vs Polk Audio XT60
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- See all 41 comparisons
KEF R5 Meta: $3,999.99 Discontinued eBay
Pros: 12th generation 5” Uni-Q coaxial driver array with Metamaterial Absorption Technology (MAT) delivers remarkably smooth, controlled horizontal (±50°) and vertical directivity with near-identical off-axis tracking. Exceptional frequency response linearity through the midrange and treble that takes extremely well to minor parametric EQ adjustments. Constrained Layer Damping cabinet construction and flexible rear ports minimize enclosure resonances and port turbulence. Deliberately tuned low-frequency roll-off profile permits boundary-adjacent room placement near front walls without boomy acoustic buildup.
Cons: Low-frequency extension (F3 of 52Hz, F10 of 38Hz) requires pairing with a dedicated subwoofer crossed over at 80Hz for high-output home theater or bass-heavy music performance. High-frequency radiation above 7kHz shows a mild on-axis taper (1-2dB downward slope), performing best when listened to 10-20° off-axis. Moderate sensitivity (~86dB SPL average) requires a clean, robust 4-ohm capable amplifier to drive high dynamic peaks without clipping. Discontinued.
Full KEF R5 Meta review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 42.2"H x 10.7"W x 13.6"D (1073 x 273 x 346 mm) |
| Discontinued | Yes |
| Drivers | 1 in. vented aluminum dome tweeter with MAT, 5 in. aluminum cone midrange, two 5.25 in. hybrid aluminum cone woofers |
| Impedance | 4 ohms nominal |
| Sensitivity | 86dB (measured average, Erin's Audio Corner) |
| Weight | 54 lbs / 24.5 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons