Short answer: the Klipsch RP-5000F II. Both are rated 4.0/5 for sound quality (#46 and #44 of 74 floorstanding speakers), and the Klipsch RP-5000F II costs $1,199.98 against $2,499.98 for the KEF Q11 Meta, and with sound quality even, the cheaper one is the better buy.
What the KEF Q11 Meta does well: Three-way tower design with a coaxial layout: a 3/4” aluminum dome tweeter (with KEF’s Metamaterial Absorption Technology behind it) mounted at the center of a 4” mid-range, plus three 6.5” bass drivers. The tradeoff: Genuinely dark-sounding on raw on-axis measurement, and needs a typical room with sidewall reflections (within about 6 feet/2 meters) to sound properly neutral: in a large room with little sidewall interaction, it may sound too dull for some listeners.
What the Klipsch RP-5000F II does well: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Watch for: Bass extension is underwhelming for a floorstander (F3 at 55Hz, F10 at 41Hz) and needs a subwoofer.
Buy the Klipsch RP-5000F II. Both are rated the same for sound quality, and it costs $1,300 less than the KEF Q11 Meta.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| KEF Q11 Meta | Klipsch RP-5000F II | |
|---|---|---|
| Price | $2,499.98 per pair | $1,199.98 per pair |
| Ranked | #44 of 74 in Large Size Floorstanding Speakers | #46 of 74 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 29Hz (measured, Erin’s Audio Corner) | 41Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) | 55Hz (measured, Erin’s Audio Corner) |
| Drivers | 25mm tweeter + dual 165mm drivers | 1” titanium tweeter with Tractrix horn, dual 5.25” cerametallic woofers |
| Weight | 106.9 lbs (48.5 kg) | 38.6 lbs (17.5 kg) |
| Sensitivity | 88.6dB (measured, Erin’s Audio Corner) | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Impedance | 4 ohms nominal (3.2 ohms minimum, measured, Erin’s Audio Corner) | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) |
| Dimensions | 43.8”H x 12.5”W x 15”D (1112.8 x 317.5 x 381.0 mm) | 36.1” x 8.1” x 14.8” (917 x 207 x 375 mm) |
| Woofer Cabinet | ported, rear | ported, rear |
| Spinorama Preference Score | 6.72 | 5.24 |
| Spinorama Preference Score with Perfect Sub | 8.03 | 7.25 |
| DIY Kit | No | No |
| Frequency Response | - | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Crossover Frequency | - | 1900Hz |
| Power Handling | - | 100W continuous, 400W peak |
Related Speaker Comparisons
More top alternatives to KEF Q11 Meta:
- KEF Q11 Meta vs KEF Blade Two Meta
- KEF Q11 Meta vs MoFi SourcePoint V10 Master Edition
- KEF Q11 Meta vs MoFi SourcePoint 888
- KEF Q11 Meta vs Revel F328Be
- Radiant Acoustics Clarity 66 vs KEF Q11 Meta
Prices on this page were last checked September 30, 2026 at 2:57 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF Q11 Meta: $2,499.98 per pair Amazon eBay
Pros: Three-way tower design with a coaxial layout: a 3/4” aluminum dome tweeter (with KEF’s Metamaterial Absorption Technology behind it) mounted at the center of a 4” mid-range, plus three 6.5” bass drivers. Extremely linear estimated in-room response when placed correctly, thanks to a deliberately declining on-axis response paired with well-controlled directivity: a technically sound design philosophy, even though it reads as “dark” in raw anechoic on-axis measurements. In-room bass extension to about 40-50Hz when placed near a wall, thanks to extended bass-shelf tuning. Sounds excellent whether pointed directly at the listener or toed out a full 30° parallel to the back wall: unusually flexible placement. More vertical listening leeway than standard non-coaxial two-way designs, thanks to the coincident tweeter/midrange. Distortion looks good at both 86dB and 96dB, and multitone distortion holds up well too. Comes with a plinth/outrigger kit for stability given its floorstanding height (about 43-44”). Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 88.6dB.
Cons: Genuinely dark-sounding on raw on-axis measurement, and needs a typical room with sidewall reflections (within about 6 feet/2 meters) to sound properly neutral: in a large room with little sidewall interaction, it may sound too dull for some listeners. Must be placed close to a rear wall (about 1 foot) to get proper bass: pulling it out to the “standard” 3-foot audiophile recommendation causes bass output to drop off noticeably. Horizontal radiation of about ±50° is narrower than the reviewer’s preferred ±60°, giving a slightly less enveloping soundstage than some rivals. Notably darker than sibling KEF models in the same product family: measures 2-5dB less top-end energy than the R3 Meta and a few dB less than the Q Concerto Meta. Minor lingering resonances appear in burst decay measurements between 500Hz-1kHz. The tweeter shows some strain at very high output volumes, a limitation the reviewer notes is common even among more budget-friendly speakers generally.
Full KEF Q11 Meta review and specifications →
| Bass Extension (-10dB) | 29Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 43.8”H x 12.5”W x 15”D (1112.8 x 317.5 x 381.0 mm) |
| Drivers | 25mm tweeter + dual 165mm drivers |
| Impedance | 4 ohms nominal (3.2 ohms minimum, measured, Erin’s Audio Corner) |
| Sensitivity | 88.6dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 6.72 |
| Spinorama Preference Score with Perfect Sub | 8.03 |
| Weight | 106.9 lbs (48.5 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Klipsch RP-5000F II: $1,199.98 per pair B&H Photo Video eBay
Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity. Measured bass extension of 55Hz (-3dB), with a measured sensitivity of 90dB.
Cons: Bass extension is underwhelming for a floorstander (F3 at 55Hz, F10 at 41Hz) and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Full Klipsch RP-5000F II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 1900Hz |
| DIY Kit | No |
| Dimensions | 36.1” x 8.1” x 14.8” (917 x 207 x 375 mm) |
| Drivers | 1” titanium tweeter with Tractrix horn, dual 5.25” cerametallic woofers |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) |
| Power Handling | 100W continuous, 400W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Spinorama Preference Score | 5.24 |
| Spinorama Preference Score with Perfect Sub | 7.25 |
| Weight | 38.6 lbs (17.5 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-5000F II vs Monolith THX-365T
- Klipsch RP-5000F II vs Klipsch RP-8000F II
- Klipsch RP-5000F II vs Dynaudio Emit 30
- Klipsch RP-5000F II vs Klipsch Forte IV
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- Klipsch RP-5000F II vs Q Acoustics 5040
- Klipsch RP-5000F II vs Infinity Primus 360
- Klipsch RP-5000F II vs Definitive Technology BP-9020
- See all 44 comparisons