ELAC DBR62 Review: Ranked #57 of 134

Last updated: October 1, 2026

The ELAC DBR62 ranks #57 out of 134 total Large Size Bookshelf Speakers for sound quality. See all Passive Home rankings for every top pick.

Brand: ELAC

Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

ELAC DBR62 - ranked #57 of 134 Large Size Bookshelf Speakers · Editor's rating 4/5
Check price at Amazon ($678.97 per pair) →

#57 ELAC DBR62: $678.97 per pair Amazon Crutchfield eBay

Pros: Two-way design with a 6.5” woofer and 1” dome tweeter in a shallow waveguide, with the tweeter positioned close to the woofer for near-point-source coherence: giving more vertical listening leeway than typical two-ways. Notably forgiving of placement and aiming: sounds good from directly on-axis all the way to 30° of toe-out (parallel with the rear wall), making it more room-independent than many speakers this price. Wide horizontal radiation of about ±70° until the tweeter starts beaming, right in the reviewer’s preferred sweet spot. A mild, wide-Q bass bump centered around 100Hz adds a bit of extra punch that the reviewer personally likes. On-axis linearity within about ±2.5dB, with a strong measured preference score of 5.3. Distortion stays below 3% at both 86dB and 96dB until around 50Hz. Vertical sweet spot of about ±10-20° works well for multi-row home theater seating. The reviewer calls it “the epitome of a good speaker” for its price, with no reservations recommending it. Measured bass extension of 53Hz (-3dB), with a measured sensitivity of 84.3dB.

Cons: A slight recess in the 1-2kHz region reduces vocal presence somewhat compared to other speakers in direct comparison. A mild hot spot around 4-5kHz can read as slight sibilance when pointed directly on-axis. Low-to-mid sensitivity (about 84.3dB) combined with a current draw that behaves like roughly 2.4 ohms between 100-200Hz means it’s best driven by a dedicated 4-ohm-capable amplifier rather than an AVR. A diffraction dip from the baffle edge is visible in measurements: typical of any standard rectangular-baffle speaker and not correctable without a much more expensive curved-baffle design. Multitone distortion testing suggests some potential midrange distortion could be audible on certain material, though the reviewer didn’t personally notice it. Minor resonances appear around 700Hz and 1-1.5kHz, possibly tied to the enclosure, port, or cone/surround edge termination, though their audible impact appears minimal. F3 of 53Hz means a subwoofer is still needed for real bass extension below about 40Hz.

How it compares: Just above it: Paradigm Founder 40B - $521 more, 4.7Hz higher bass extension (-3dB). Just below it: Yamaha NS-800A - $4321 more, 0.6Hz higher bass extension (-3dB).

Bass Extension (-10dB)41Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)53Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions14.1”H x 8.2”W x 10.8”D (358.1 x 208.3 x 274.3 mm)
Drivers6.5” Aramid Fiber woofer, 1” soft dome tweeter
Impedance6 ohms nominal, 5.2 ohms minimum (measured above 80Hz, Erin’s Audio Corner)
Sensitivity84.3dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin’s Audio Corner; 86dB manufacturer specified)
Spinorama Preference Score5.07
Spinorama Preference Score with Perfect Sub7.27
Weight18.1 lbs (8.2 kg) each
Woofer Cabinetported, front
Check current price at Amazon ($678.97) →Check current price at Crutchfield →Search eBay for ELAC DBR62 →

More ELAC speakers →