Short answer: the ELAC DBR62. It ranks #77 of 203 bookshelf speakers by sound quality, rated 4.0/5, at $678.97; the Dynaudio Special Forty ranks #135, rated 3.5/5, and costs $3,600, which makes this an easy call rather than a real tradeoff.
The ELAC DBR62 is the better-sounding pick. Two-way design with a 6.5” woofer and 1” dome tweeter in a shallow waveguide, with the tweeter positioned close to the woofer for near-point-source coherence: giving more vertical listening leeway than typical two-ways. The tradeoff: A slight recess in the 1-2kHz region reduces vocal presence somewhat compared to other speakers in direct comparison.
What the Dynaudio Special Forty does well: Smooth, “buttery” overall tonal character consistent with Dynaudio’s house sound. The catch: A glaring, sometimes sibilant quality around 3-4kHz was the most noticeable issue in listening, the one thing the reviewer would want notched out with EQ.
Buy the ELAC DBR62. It is rated higher for sound quality than the Dynaudio Special Forty and costs less, which makes it the one to get unless you need something the other one does better.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| ELAC DBR62 | Dynaudio Special Forty | |
|---|---|---|
| Price | $678.97 per pair | $3600 per pair |
| Ranked | #77 of 203 in Large Size Bookshelf Speakers | #135 of 203 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 39Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 53Hz (measured, Erin’s Audio Corner) | 54Hz (measured, Erin’s Audio Corner) |
| Dimensions | 14.1”H x 8.2”W x 10.8”D (358.1 x 208.3 x 274.3 mm) | 14.1”H x 7.7”W x 12.1”D (358.1 x 195.6 x 307.3 mm) |
| Impedance | 6 ohms nominal, 5.2 ohms minimum (measured above 80Hz, Erin’s Audio Corner) | 6 ohms nominal (4.9 ohms minimum above 80Hz, measured, Erin’s Audio Corner) |
| Sensitivity | 84.3dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin’s Audio Corner; 86dB manufacturer specified) | 83.5dB (measured, Erin’s Audio Corner; 86dB manufacturer specified) |
| Drivers | 6.5” Aramid Fiber woofer, 1” soft dome tweeter | 5.9” MSP (Magnesium Silicate Polymer) cone woofer, 1” Esotar soft dome tweeter |
| Weight | 18.1 lbs (8.2 kg) each | 17.9 lbs (8.1 kg) each |
| Woofer Cabinet | ported, front | ported |
| Spinorama Preference Score | 5.07 | 4.73 |
| Spinorama Preference Score with Perfect Sub | 7.27 | 6.74 |
| DIY Kit | No | No |
Related Speaker Comparisons
More top alternatives to ELAC DBR62:
- ELAC DBR62 vs Perlisten S4b
- ELAC DBR62 vs KEF Reference 1 Meta
- ELAC DBR62 vs GR-Research NX-Studio
- ELAC DBR62 vs AsciLab C6B
- ELAC DBR62 vs Audio First Cadentia 3
Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
ELAC DBR62: $678.97 per pair Amazon Crutchfield eBay
Same family: the ELAC Debut Reference DFR52 (floorstanding, estimated 4.3/5) and the ELAC Debut Reference DCR52 (center, estimated 3.4/5).
Pros: Two-way design with a 6.5” woofer and 1” dome tweeter in a shallow waveguide, with the tweeter positioned close to the woofer for near-point-source coherence: giving more vertical listening leeway than typical two-ways. Notably forgiving of placement and aiming: sounds good from directly on-axis all the way to 30° of toe-out (parallel with the rear wall), making it more room-independent than many speakers this price. Wide horizontal radiation of about ±70° until the tweeter starts beaming, right in the reviewer’s preferred sweet spot. A mild, wide-Q bass bump centered around 100Hz adds a bit of extra punch that the reviewer personally likes. On-axis linearity within about ±2.5dB, with a strong measured preference score of 5.3. Distortion stays below 3% at both 86dB and 96dB until around 50Hz. Vertical sweet spot of about ±10-20° works well for multi-row home theater seating. The reviewer calls it “the epitome of a good speaker” for its price, with no reservations recommending it. Measured bass extension of 53Hz (-3dB), with a measured sensitivity of 84.3dB.
Cons: A slight recess in the 1-2kHz region reduces vocal presence somewhat compared to other speakers in direct comparison. A mild hot spot around 4-5kHz can read as slight sibilance when pointed directly on-axis. Low-to-mid sensitivity (about 84.3dB) combined with a current draw that behaves like roughly 2.4 ohms between 100-200Hz means it’s best driven by a dedicated 4-ohm-capable amplifier rather than an AVR. A diffraction dip from the baffle edge is visible in measurements: typical of any standard rectangular-baffle speaker and not correctable without a much more expensive curved-baffle design. Multitone distortion testing suggests some potential midrange distortion could be audible on certain material, though the reviewer didn’t personally notice it. Minor resonances appear around 700Hz and 1-1.5kHz, possibly tied to the enclosure, port, or cone/surround edge termination, though their audible impact appears minimal. F3 of 53Hz means a subwoofer is still needed for real bass extension below about 40Hz.
Full ELAC DBR62 review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 53Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 14.1”H x 8.2”W x 10.8”D (358.1 x 208.3 x 274.3 mm) |
| Drivers | 6.5” Aramid Fiber woofer, 1” soft dome tweeter |
| Impedance | 6 ohms nominal, 5.2 ohms minimum (measured above 80Hz, Erin’s Audio Corner) |
| Sensitivity | 84.3dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin’s Audio Corner; 86dB manufacturer specified) |
| Spinorama Preference Score | 5.07 |
| Spinorama Preference Score with Perfect Sub | 7.27 |
| Weight | 18.1 lbs (8.2 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Top 3 Things You Need to Know About ELAC DBR62 Before You Buy More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Elac DBR62
- Erin’s Audio Corner: 5 AWESOME SPEAKERS Under $1000 You Won’t Regret
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- Audio Science Review Measurements More from Audio Science Review →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- ELAC DBR62 vs Yamaha NS-800A
- ELAC DBR62 vs Definitive Technology Demand D11
- ELAC DBR62 vs Buchardt S400 MK3
- ELAC DBR62 vs Technics SB-C700
- ELAC DBR62 vs ELAC Uni-Fi Reference UBR62
- ELAC DBR62 vs Ascend Acoustics Sierra Duo V2 Ribbon
- ELAC DBR62 vs Dynaudio Contour 20i
- ELAC DBR62 vs Revel Concerta2 M16
- See all 68 comparisons
Dynaudio Special Forty: $3600 per pair Safe and Sound HQ eBay
Pros: Smooth, “buttery” overall tonal character consistent with Dynaudio’s house sound. Surprisingly precise, focused imaging despite wide horizontal radiation (about ±70°): atypical, since wide-radiating speakers usually sacrifice some image precision in reflective rooms. Strong output capability: reached 100-101dB average at 3.5 meters with no audible distortion or woofer distress, and compression testing at 102dB shows the cabinet holding up mechanically well at extreme output. Bass reaches a genuine 50Hz (potentially 40Hz) in most rooms from a rear-ported design. Distortion stays below 1% at 86dB and doesn’t cross 3% THD until about 50Hz even at 96dB. Extra weight and impact on snares and percussion around 700-800Hz that the reviewer found appealing on many tracks. Measured bass extension of 54Hz (-3dB), with a measured sensitivity of 83.5dB.
Cons: A glaring, sometimes sibilant quality around 3-4kHz was the most noticeable issue in listening, the one thing the reviewer would want notched out with EQ. Multiple enclosure resonances appear between 500Hz-1kHz across on-axis, listening window, early-reflections, and sound-power measurements, corroborated by independent third-party CSD data showing similar 500-800Hz cabinet resonances. A dip around 1.2kHz traces to a cone-edge-to-surround compliance mismatch in the driver itself (confirmed by testing the bare driver’s impedance): a known artifact common to many similarly-sized drivers across several manufacturers, contributing to elevated second-order distortion in that region. A somewhat laid-back, recessed 1-2kHz character (sometimes described as a “BBC dip”) gives an overall subdued quality that isn’t overtly problematic but shapes the tonal balance. Impedance drops below 3 ohms in the 100-200Hz region, requiring a genuinely 4-ohm-stable amplifier rather than an AVR. Rear port means it can’t be placed directly against a wall.
Full Dynaudio Special Forty review and specifications →
| Bass Extension (-10dB) | 39Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 54Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 14.1”H x 7.7”W x 12.1”D (358.1 x 195.6 x 307.3 mm) |
| Drivers | 5.9” MSP (Magnesium Silicate Polymer) cone woofer, 1” Esotar soft dome tweeter |
| Impedance | 6 ohms nominal (4.9 ohms minimum above 80Hz, measured, Erin’s Audio Corner) |
| Sensitivity | 83.5dB (measured, Erin’s Audio Corner; 86dB manufacturer specified) |
| Spinorama Preference Score | 4.73 |
| Spinorama Preference Score with Perfect Sub | 6.74 |
| Weight | 17.9 lbs (8.1 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Special Forty vs ELAC Debut 2.0 B6.2
- Dynaudio Special Forty vs Infinity IL10
- Dynaudio Special Forty vs SVS Prime Bookshelf
- Dynaudio Special Forty vs GR-Research X-LS Encore
- Dynaudio Special Forty vs KEF Q3 Meta
- Dynaudio Special Forty vs Polk Monitor XT20
- Dynaudio Special Forty vs Sonus Faber Lumina II
- Dynaudio Special Forty vs Mission LX-3 MKII
- See all 55 comparisons