ELAC Uni-Fi Reference UBR62 vs ELAC DBR62

Last updated: November 3, 2026

Quick answer: the ELAC Uni-Fi Reference UBR62 if sound quality matters most, the ELAC DBR62 if price matters most. The ELAC Uni-Fi Reference UBR62 ranks #65 of 222 bookshelf speakers, rated 4.1/5, at $1,299. The ELAC DBR62 ranks #79, rated 4.0/5, at $699.98, $599.02 cheaper.

ELAC Uni-Fi Reference UBR62 vs ELAC DBR62

The DBR62’s review is about as strong an endorsement as this site gives: it recommends the speaker without reservation at its price. Its measurements back that up, with on-axis linearity within about ±2.5dB, a strong measured preference score of 5.3, wide ±70-degree horizontal radiation, and distortion staying below 3% at both 86dB and 96dB until around 50Hz. It’s also notably forgiving of placement, sounding good from directly on-axis out to 30 degrees of toe-out.

The UBR62 steps up to a true three-way design, with a coaxially mounted 1-inch tweeter and 4-inch aluminum midrange plus a dedicated 6.5-inch aluminum woofer, versus the DBR62’s simpler two-way layout. That extra complexity comes with a real cost: Erin measured very low 83dB sensitivity on the UBR62, low enough that a 110W amplifier wasn’t sufficient for high-level testing and a more powerful amp was needed. The DBR62’s sensitivity of about 84.3dB isn’t much higher, but the UBR62 also showed a broad 500-700Hz rise with audible lower and female-vocal coloration that the DBR62’s review doesn’t report.

Both speakers need a subwoofer for real deep bass: the UBR62 reaches -3dB around 58.6Hz and the DBR62 around 53Hz, with the DBR62 actually extending slightly deeper despite its simpler two-way design.

Buy the DBR62 for the unreserved recommendation its review gives it at its price, especially given how close the two rank.

Buy the UBR62 only if you specifically want the three-way coaxial design and have an amplifier powerful enough to drive its low sensitivity.

Looking for alternatives? See the complete Passive Home rankings.

Measured Differences

Prices on this page were last checked November 14, 2026 at 6:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Specifications Side By Side

ELAC Uni-Fi Reference UBR62 ELAC DBR62
Price$1,299.00 per pair$699.98 per pair
Ranked#65 of 222 in Large Size Bookshelf Speakers#79 of 222 in Large Size Bookshelf Speakers
Bass Extension41Hz manufacturer specified; Erin’s response-linearity graph shows limited high-output bass headroom-
Bass Extension (-3dB)58.6Hz (measured, Erin’s Audio Corner)53Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)41.9Hz (measured, Erin’s Audio Corner)41Hz (measured, Erin’s Audio Corner)
Sensitivity83dB/2.83V/1m (measured, Erin’s Audio Corner)84.3dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin’s Audio Corner; 86dB manufacturer specified)
Impedance4 ohms minimum near 50Hz (measured, Erin’s Audio Corner)6 ohms nominal, 5.2 ohms minimum (measured above 80Hz, Erin’s Audio Corner)
Drivers1” tweeter coaxial with 4” midrange; 6.5” woofer6.5” Aramid Fiber woofer, 1” soft dome tweeter
Dimensions14.1”H x 8.2”W x 13.1”D14.1”H x 8.2”W x 10.8”D (358.1 x 208.3 x 274.3 mm)
Woofer Cabinetported, dual front slot ventsported, front
Weight23.5 lbs (10.68 kg) each18.1 lbs (8.2 kg) each
Spinorama Preference Score5.44 (measured, spinorama.org)5.07
Spinorama Preference Score with Perfect Sub7.7 (measured, spinorama.org)7.27
DIY KitNoNo

Where the Ratings Come From

This comparison is generated from the ratings, specifications and measurements on each product’s own page, and it updates when that data changes. How we rank explains how each rating is decided.

More worthwhile head-to-heads for ELAC Uni-Fi Reference UBR62: