The ELAC Uni-Fi Reference UBR62 ranks #54 out of 130 total Large Size Bookshelf Speakers for sound quality. See all Passive Home rankings for every top pick.
Brand: ELAC
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#54 ELAC Uni-Fi Reference UBR62: $1,199 per pair Amazon eBay
Pros: True three-way stand-mount using a 1-inch tweeter concentrically mounted in a 4-inch aluminum midrange plus a dedicated 6.5-inch aluminum woofer. Erin found the directivity and overall tonality well controlled, with dual front slot vents minimizing placement sensitivity and cabinet bracing suppressing obvious coloration. The mostly 5-ohm-or-higher load is manageable for a genuinely 4-ohm-capable amplifier, and the coherent concentric upper range supports stable imaging across seats. Measured bass extension of 58.6Hz (-3dB), with a measured sensitivity of 83dB.
Cons: Erin measured very low 83dB/2.83V/1m sensitivity; his 110W Parasound was insufficient for the high-level test and the more powerful HINT 6 was needed. Impedance reaches 4 ohms near 50Hz (Erin), while woofer excursion and bass output were less capable than expected for the cabinet size. A broad 500-700Hz rise and associated lower/female-vocal coloration were audible, and the slightly subdued listening-window treble is necessary to avoid an overly bright in-room balance rather than evidence of ruler-flat axial tuning.
How it compares: Just above it: JTR Noesis 210HT - $800 more, 9.5Hz higher bass extension (-3dB). Just below it: ELAC DBR62 - $400 cheaper, 1.3Hz higher bass extension (-3dB).
| Bass Extension | 41Hz manufacturer specified; Erin's response-linearity graph shows limited high-output bass headroom |
|---|---|
| Bass Extension (-10dB) | 41.9Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 58.6Hz (measured, Erin's Audio Corner) |
| Dimensions | 14.1"H x 8.2"W x 13.1"D |
| Drivers | 1" tweeter coaxial with 4" midrange; 6.5" woofer |
| Impedance | 4 ohms minimum near 50Hz (measured, Erin's Audio Corner) |
| Sensitivity | 83dB/2.83V/1m (measured, Erin's Audio Corner) |
| Woofer Cabinet | ported, dual front slot vents |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Uni-Fi Reference UBR62 vs ELAC DBR62
- ELAC Uni-Fi Reference UBR62 vs Yamaha NS-800A
- ELAC Uni-Fi Reference UBR62 vs Definitive Technology Demand D11
- ELAC Uni-Fi Reference UBR62 vs Technics SB-C700
- ELAC Uni-Fi Reference UBR62 vs Power Sound Audio MT-110-M
- ELAC Uni-Fi Reference UBR62 vs Dynaudio Contour 20i
- ELAC Uni-Fi Reference UBR62 vs Revel Concerta2 M16
- ELAC Uni-Fi Reference UBR62 vs SVS Ultra Bookshelf
- ELAC Uni-Fi Reference UBR62 vs JBL HDI-1600
- ELAC Uni-Fi Reference UBR62 vs ELAC Debut 3.0 DB63
- ELAC Uni-Fi Reference UBR62 vs Emotiva Airmotiv XB2
- ELAC Uni-Fi Reference UBR62 vs ELAC VELA BS 403
- ELAC Uni-Fi Reference UBR62 vs Klipsch RP-600M II
- ELAC Uni-Fi Reference UBR62 vs Dynaudio Emit 20
- ELAC Uni-Fi Reference UBR62 vs Polk Monitor XT20
