Short answer: the Wharfedale Super Linton if sound quality matters most, the ELAC Uni-Fi Reference UBR62 if price matters most. The Wharfedale Super Linton ranks #24 of 131 bookshelf speakers, rated 4.4/5, at $2,699. The ELAC Uni-Fi Reference UBR62 ranks #54, rated 4.1/5, at $1,199, $1,500 cheaper.
What the Wharfedale Super Linton does well: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility.
Why pick the ELAC Uni-Fi Reference UBR62: True three-way stand-mount using a 1-inch tweeter concentrically mounted in a 4-inch aluminum midrange plus a dedicated 6.5-inch aluminum woofer. The catch: Erin measured very low 83dB/2.83V/1m sensitivity; his 110W Parasound was insufficient for the high-level test and the more powerful HINT 6 was needed.
Buy the Wharfedale Super Linton when sound quality outweighs the price for you, and the ELAC Uni-Fi Reference UBR62 when the price outweighs sound quality instead.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Wharfedale Super Linton | ELAC Uni-Fi Reference UBR62 | |
|---|---|---|
| Price | $2,699.00 per pair | $1,199 per pair |
| Ranked | #24 of 131 in Large Size Bookshelf Speakers | #54 of 131 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 34Hz (measured, Erin’s Audio Corner) | 41.9Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 77Hz (measured, Erin’s Audio Corner) | 58.6Hz (measured, Erin’s Audio Corner) |
| Dimensions | 23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm) | 14.1”H x 8.2”W x 13.1”D |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner) | 4 ohms minimum near 50Hz (measured, Erin’s Audio Corner) |
| Drivers | 8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeter | 1” tweeter coaxial with 4” midrange; 6.5” woofer |
| Sensitivity | 88.2dB (measured, Erin’s Audio Corner) | 83dB/2.83V/1m (measured, Erin’s Audio Corner) |
| Weight | 43.7 lbs (19.8 kg) each | 23.5 lbs (10.68 kg) each |
| Woofer Cabinet | ported, rear | ported, dual front slot vents |
| Spinorama Preference Score | 6.09 | 5.44 (measured, spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 7.94 | 7.7 (measured, spinorama.org) |
| DIY Kit | No | No |
| Bass Extension | - | 41Hz manufacturer specified; Erin’s response-linearity graph shows limited high-output bass headroom |
Related Speaker Comparisons
More worthwhile head-to-heads for Wharfedale Super Linton:
- Wharfedale Super Linton vs Perlisten S4b
- Wharfedale Super Linton vs KEF Reference 1 Meta
- Wharfedale Super Linton vs GR-Research NX-Studio
- Wharfedale Super Linton vs AsciLab C6B
- Wharfedale Super Linton vs Audio First Cadentia 3
Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay
Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
Full Wharfedale Super Linton review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 77Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm) |
| Drivers | 8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeter |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 6.09 |
| Spinorama Preference Score with Perfect Sub | 7.94 |
| Weight | 43.7 lbs (19.8 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: 5 Reasons Wharfedale Super Linton is the Hidden Gem of Audio Equipment More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Super Linton Review
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Absolute Favorite Products of 2024 Revealed
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Super Linton vs Ascend Acoustics CMT-340 SE2
- Wharfedale Super Linton vs Arendal 1528 Monitor 8
- Wharfedale Super Linton vs MoFi SourcePoint 10
- Wharfedale Super Linton vs Radiant Acoustics Clarity 6.2
- Wharfedale Super Linton vs Perlisten R4b
- Wharfedale Super Linton vs Dynaudio Heritage Special
- Wharfedale Super Linton vs AsciLab F6Bs
- Wharfedale Super Linton vs Epos ES14N
- See all 62 comparisons
ELAC Uni-Fi Reference UBR62: $1,199 per pair Amazon eBay
Pros: True three-way stand-mount using a 1-inch tweeter concentrically mounted in a 4-inch aluminum midrange plus a dedicated 6.5-inch aluminum woofer. Erin found the directivity and overall tonality well controlled, with dual front slot vents minimizing placement sensitivity and cabinet bracing suppressing obvious coloration. The mostly 5-ohm-or-higher load is manageable for a genuinely 4-ohm-capable amplifier, and the coherent concentric upper range supports stable imaging across seats. Measured bass extension of 58.6Hz (-3dB), with a measured sensitivity of 83dB.
Cons: Erin measured very low 83dB/2.83V/1m sensitivity; his 110W Parasound was insufficient for the high-level test and the more powerful HINT 6 was needed. Impedance reaches 4 ohms near 50Hz (Erin), while woofer excursion and bass output were less capable than expected for the cabinet size. A broad 500-700Hz rise and associated lower/female-vocal coloration were audible, and the slightly subdued listening-window treble is necessary to avoid an overly bright in-room balance rather than evidence of ruler-flat axial tuning.
Full ELAC Uni-Fi Reference UBR62 review and specifications →
| Bass Extension | 41Hz manufacturer specified; Erin’s response-linearity graph shows limited high-output bass headroom |
|---|---|
| Bass Extension (-10dB) | 41.9Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 58.6Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 14.1”H x 8.2”W x 13.1”D |
| Drivers | 1” tweeter coaxial with 4” midrange; 6.5” woofer |
| Impedance | 4 ohms minimum near 50Hz (measured, Erin’s Audio Corner) |
| Sensitivity | 83dB/2.83V/1m (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.44 (measured, spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 7.7 (measured, spinorama.org) |
| Weight | 23.5 lbs (10.68 kg) each |
| Woofer Cabinet | ported, dual front slot vents |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Uni-Fi Reference UBR62 vs ELAC DBR62
- ELAC Uni-Fi Reference UBR62 vs Power Sound Audio MT-110-M
- ELAC Uni-Fi Reference UBR62 vs Yamaha NS-800A
- ELAC Uni-Fi Reference UBR62 vs Definitive Technology Demand D11
- ELAC Uni-Fi Reference UBR62 vs Revel Concerta2 M16
- ELAC Uni-Fi Reference UBR62 vs Technics SB-C700
- ELAC Uni-Fi Reference UBR62 vs Dynaudio Contour 20i
- ELAC Uni-Fi Reference UBR62 vs SVS Ultra Bookshelf
- See all 24 comparisons