Short answer: the Perlisten S4b on measured sound quality, the Wharfedale Super Linton on price. The Perlisten S4b ranks #2 of 130 bookshelf speakers at $8000. The Wharfedale Super Linton ranks #24 at $2699, $5301 cheaper.
What the Wharfedale Super Linton offers: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
What the Perlisten S4b offers: Reference-grade directivity and output from a compact sealed monitor. Erin called its radiation behavior the smoothest he had measured: Perlisten’s DPC array (beryllium tweeter between two midrange domes) shapes vertical output while transitioning cleanly to the 7-inch woofer. Harmonic distortion remains below 1% at 86dB and, above 100Hz, also below 1% at 96dB; compression is exceptionally low. The response is highly linear, the midrange was a listening highlight, and the sealed F10 of 40Hz provides a predictable slope for subwoofer integration. Watch for: Erin measured only 84.5dB sensitivity and an impedance minimum just under 4 ohms, a difficult efficiency/load combination that deserves substantial clean amplification. Its 78Hz F3 means a subwoofer is effectively mandatory for full-range listening despite the 40Hz F10. A roughly +3dB feature around 10kHz appears on-axis, though Erin did not find it objectionable. Price is extreme for a stand-mount and the tightly managed vertical radiation makes correct stand height important.
Buy the Wharfedale Super Linton if the price matters more than sound quality. Buy the Perlisten S4b if sound quality matters more than the price.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Wharfedale Super Linton | Perlisten S4b | |
|---|---|---|
| Price | $2,699.00 per pair | $8,000 per pair |
| Ranked | #24 of 130 in Large Size Bookshelf Speakers | #2 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) | 40Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) | 78Hz (measured, Erin's Audio Corner) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) | 16.5"H x 9.4"W x 7.3"D |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) | Just under 4 ohms minimum (measured, Erin's Audio Corner) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter | DPC array with 28mm beryllium tweeter and dual 28mm midrange domes; 7" woofer |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) | 84.5dB/2.83V/1m (measured, Erin's Audio Corner) |
| Weight | 43.7 lbs (19.8 kg) each | 24.3 lbs (11 kg) each |
| Woofer Cabinet | ported, rear | sealed |
| Spinorama Preference Score | 5.28 | 4.58 |
| Spinorama Preference Score with Perfect Sub | 7.12 | 7.24 |
Related Speaker Comparisons
How Perlisten S4b compares with other leading options:
- Perlisten S4b vs KEF Reference 1 Meta
- GR-Research NX-Studio vs Perlisten S4b
- AsciLab C6B vs Perlisten S4b
- Perlisten S4b vs Audio First Cadentia 3
- KEF R3 Meta vs Perlisten S4b
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay
Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
Full Wharfedale Super Linton review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.28 |
| Spinorama Preference Score with Perfect Sub | 7.12 |
| Weight | 43.7 lbs (19.8 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: 5 Reasons Wharfedale Super Linton is the Hidden Gem of Audio Equipment More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Super Linton Review
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Absolute Favorite Products of 2024 Revealed
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Super Linton vs Ascend Acoustics CMT-340 SE2
- Wharfedale Super Linton vs Arendal 1528 Monitor 8
- Wharfedale Super Linton vs MoFi SourcePoint 10
- Wharfedale Super Linton vs Radiant Acoustics Clarity 6.2
- Wharfedale Super Linton vs Dynaudio Heritage Special
- Wharfedale Super Linton vs AsciLab F6Bs
- Wharfedale Super Linton vs MoFi SourcePoint 8
- Wharfedale Super Linton vs Wharfedale Linton 85
- See all 51 comparisons
Perlisten S4b: $8,000 per pair Perlisten Dealer Locator eBay
Pros: Reference-grade directivity and output from a compact sealed monitor. Erin called its radiation behavior the smoothest he had measured: Perlisten’s DPC array (beryllium tweeter between two midrange domes) shapes vertical output while transitioning cleanly to the 7-inch woofer. Harmonic distortion remains below 1% at 86dB and, above 100Hz, also below 1% at 96dB; compression is exceptionally low. The response is highly linear, the midrange was a listening highlight, and the sealed F10 of 40Hz provides a predictable slope for subwoofer integration. Measured bass extension of 78Hz (-3dB), with a measured sensitivity of 84.5dB.
Cons: Erin measured only 84.5dB sensitivity and an impedance minimum just under 4 ohms, a difficult efficiency/load combination that deserves substantial clean amplification. Its 78Hz F3 means a subwoofer is effectively mandatory for full-range listening despite the 40Hz F10. A roughly +3dB feature around 10kHz appears on-axis, though Erin did not find it objectionable. Price is extreme for a stand-mount and the tightly managed vertical radiation makes correct stand height important.
Full Perlisten S4b review and specifications →
| Bass Extension (-10dB) | 40Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 78Hz (measured, Erin's Audio Corner) |
| Dimensions | 16.5"H x 9.4"W x 7.3"D |
| Drivers | DPC array with 28mm beryllium tweeter and dual 28mm midrange domes; 7" woofer |
| Impedance | Just under 4 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 84.5dB/2.83V/1m (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.58 |
| Spinorama Preference Score with Perfect Sub | 7.24 |
| Weight | 24.3 lbs (11 kg) each |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons