Revel Concerta2 M16 vs ELAC Debut 2.0 B6.2

Last updated: September 26, 2026

Short answer: the ELAC Debut 2.0 B6.2, if you are buying new. The Revel Concerta2 M16 ranks higher than it (#51 vs #86 of 131 bookshelf speakers, 4.1/5 vs 3.5/5) but is discontinued, so only consider it used; the ELAC Debut 2.0 B6.2 is still sold new at $329.

Revel Concerta2 M16 vs ELAC Debut 2.0 B6.2

The case for the Revel Concerta2 M16: CEA2034 spinorama shows an on-axis response that’s essentially flat from 200Hz to 10kHz, with some bass boost around 100Hz. The catch: Harmonic distortion shows a notable peak around 80Hz and a sharp spike around 350Hz, plus the woofer appears to get a bit unhappy right before handing off to the tweeter.

The case for the ELAC Debut 2.0 B6.2: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. The catch: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test, reducing it by about 5dB via EQ made a noticeable but not dramatic difference.

Buy the ELAC Debut 2.0 B6.2 if you want one new; the Revel Concerta2 M16 is discontinued, so only look for it used.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

Revel Concerta2 M16 ELAC Debut 2.0 B6.2
Price$600 per pair used (about), Discontinued$329.00 per pair
Ranked#51 of 131 in Large Size Bookshelf Speakers#86 of 131 in Large Size Bookshelf Speakers
Drivers25mm tweeter + 165mm woofer25mm tweeter + 165mm woofer
Weight32 lbs (14.5 kg)29.1 lbs (13.2 kg)
Sensitivity86dB86.5dB (measured, Audio Science Review)
Impedance6 ohms6 ohms nominal, 5.2 ohms minimum (measured, Erin’s Audio Corner)
Dimensions14.8”H x 8.6”W x 10.8”D (374.7 x 218.4 x 273.3 mm)14.8”H x 7.7”W x 10.6”D (375.0 x 195.0 x 268.0 mm)
Woofer Cabinetported, rearported, front
Bass Extension (-3dB)60.1Hz (measured, Audio Science Review)64Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)41.6Hz (measured, Audio Science Review)40Hz (measured, Erin’s Audio Corner)
Spinorama Preference Score5.064.75 (spinorama.org)
Spinorama Preference Score with Perfect Sub7.287.0 (spinorama.org)
DIY KitNoNo
DiscontinuedYes-

More top alternatives to Revel Concerta2 M16:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Revel Concerta2 M16: $600 per pair used (about) Discontinued eBay

Revel Concerta2 M16 ranking card

Pros: CEA2034 spinorama shows an on-axis response that’s essentially flat from 200Hz to 10kHz, with some bass boost around 100Hz. Predicted in-room response is very nice, with just extra bass and a bit of roll-off above 20kHz - the reviewer calls it “nice!” Distortion is well controlled through most of the range at both test levels. Measured bass extension of 60.1Hz (-3dB).

Cons: Harmonic distortion shows a notable peak around 80Hz and a sharp spike around 350Hz, plus the woofer appears to get a bit unhappy right before handing off to the tweeter. Cumulative spectral decay (waterfall) shows some lingering resonances in the 300Hz-1kHz region. The reviewer cautions not to over-cover the cabinet/grille area with thin fabric, as it can audibly affect the top-end response. Discontinued.

Bass Extension (-10dB)41.6Hz (measured, Audio Science Review)
Bass Extension (-3dB)60.1Hz (measured, Audio Science Review)
DIY KitNo
Dimensions14.8”H x 8.6”W x 10.8”D (374.7 x 218.4 x 273.3 mm)
DiscontinuedYes
Drivers25mm tweeter + 165mm woofer
Impedance6 ohms
Sensitivity86dB
Spinorama Preference Score5.06
Spinorama Preference Score with Perfect Sub7.28
Weight32 lbs (14.5 kg)
Woofer Cabinetported, rear

ELAC Debut 2.0 B6.2: $329.00 per pair Amazon Crutchfield eBay

ELAC Debut 2.0 B6.2 ranking card

Pros: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. Its larger-than-typical woofer lets it play very loud with minimal distortion, staying under about 1% THD down to 50Hz at 86dB, and minimum impedance stays a comfortable 5-6 ohms. In-room bass extension reaches about 50Hz without much trouble, enough for a solid kick-drum sound. Takes equalization very well - correcting the on-axis response doesn’t cost sensitivity through the midrange, and the underlying directivity behavior (diffraction, vertical mismatch) is mild enough that EQ alone gets most of the way to a well-balanced sound. Vertical tolerance is asymmetric and fairly forgiving: about 10° above the tweeter axis and 20° below it before tonal balance meaningfully shifts. One reviewer called it “a good speaker” with “a good price” rather than just good-for-the-price, and found it fairly neutral overall in-room. Measured bass extension of 64Hz (-3dB), with a measured sensitivity of 86.5dB.

Cons: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test, reducing it by about 5dB via EQ made a noticeable but not dramatic difference. Directivity error shows up around 3.3kHz, and the upper-midrange around 4-6kHz stood out as edgy and sharp, almost sibilant at times, in casual listening - the predicted in-room response shows a lack of energy between 1-2kHz and a bit too much above that, which one reviewer thought would sound bright. Distortion at 96dB SPL/1m shows two harmonic peaks the reviewer says “should not be there,” one from woofer breakup around 400Hz and another around 7-8kHz from the tweeter, and multitone distortion approaches 10% in the 500-800Hz range at that output level. Real compression shows up even at moderate volume and worsens at 96dB and above, with the woofer clearly giving up around 60-70Hz - a subwoofer is recommended for anyone wanting to listen loud, since running it full-range at high output costs real dynamic range in the midbass and bass. Don’t place it close to a wall - boundary reinforcement adds a midbass bump that undoes the otherwise smooth, linear response. Getting the best out of it takes EQ (taming the 700Hz peak, filling in the 1-2kHz dip, and trimming the highs).

Bass Extension (-10dB)40Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)64Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions14.8”H x 7.7”W x 10.6”D (375.0 x 195.0 x 268.0 mm)
Drivers25mm tweeter + 165mm woofer
Impedance6 ohms nominal, 5.2 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity86.5dB (measured, Audio Science Review)
Spinorama Preference Score4.75 (spinorama.org)
Spinorama Preference Score with Perfect Sub7.0 (spinorama.org)
Weight29.1 lbs (13.2 kg)
Woofer Cabinetported, front