Infinity IL10 vs ELAC Debut 2.0 B6.2

Last updated: August 18, 2026

Short answer: the Infinity IL10. It ranks #59 of 100 bookshelf speakers by sound quality at $160; the ELAC Debut 2.0 B6.2 ranks #62 and costs $329, so there is not much of a tradeoff to weigh.

On the Infinity IL10 side: Impressively flat for a budget bookshelf. Set against that: Resonances at 600 and 5khz, which show up as distinct distortion spikes at 96dB SPL/1m in the same frequency regions.

What the ELAC Debut 2.0 B6.2 gets right: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. The catch: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test.

Buy the Infinity IL10. It ranks higher for sound quality than the ELAC Debut 2.0 B6.2 and costs less, so there is no real case for the other one.

Infinity IL10 vs ELAC Debut 2.0 B6.2

Specifications Side By Side

Infinity IL10 ELAC Debut 2.0 B6.2
Price$160 used, Discontinued$329.00
Ranked#59 of 100 in Large Size Bookshelf Speakers#62 of 100 in Large Size Bookshelf Speakers
Bass Extension (-10dB)44Hz (measured, Audio Science Review)40Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)59Hz (measured, Audio Science Review)64Hz (measured, Erin’s Audio Corner)
Impedance6 ohms6 ohms nominal, 5.2 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity86dB (measured, Audio Science Review)86.5dB (measured, Audio Science Review)
Drivers6.5" (165mm) woofer25mm tweeter + 165mm woofer
Weight14.3 lbs / 6.5 kg29.1 lbs / 13.2 kg
DiscontinuedYes-
Dimensions15.6"H x 8.5"W x 11.5"D (397.0 x 216.0 x 292.0 mm)14.8"H x 7.7"W x 10.6"D (375.0 x 195.0 x 268.0 mm)
Woofer Cabinetported, rearported, front

More useful head-to-heads from the same speaker class:

The Two Speakers In Full

Infinity IL10: $160 used, Discontinued

Infinity IL10 ranking card

Pros: Impressively flat for a budget bookshelf. Predicted in-room response is good aside from a bit of excess energy here and there. Distortion at 96dB SPL/1m stays low and controlled outside two narrow resonance-driven peaks.

Cons: Resonances at 600 and 5khz, which show up as distinct distortion spikes at 96dB SPL/1m in the same frequency regions. Discontinued.

Bass Extension (-10dB)44Hz (measured, Audio Science Review)
Bass Extension (-3dB)59Hz (measured, Audio Science Review)
Dimensions15.6"H x 8.5"W x 11.5"D (397.0 x 216.0 x 292.0 mm)
DiscontinuedYes
Drivers6.5" (165mm) woofer
Impedance6 ohms
Sensitivity86dB (measured, Audio Science Review)
Weight14.3 lbs / 6.5 kg
Woofer Cabinetported, rear

As an eBay Partner, we may be compensated if you make a purchase.

ELAC Debut 2.0 B6.2: $329.00 Amazon Crutchfield

ELAC Debut 2.0 B6.2 ranking card

Pros: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. Its larger-than-typical woofer lets it play very loud with minimal distortion, staying under about 1% THD down to 50Hz at 86dB, and minimum impedance stays a comfortable 5-6 ohms. In-room bass extension reaches about 50Hz without much trouble, enough for a solid kick-drum sound. Takes equalization very well - correcting the on-axis response doesn’t cost sensitivity through the midrange, and the underlying directivity behavior (diffraction, vertical mismatch) is mild enough that EQ alone gets most of the way to a well-balanced sound. Vertical tolerance is asymmetric and fairly forgiving: about 10° above the tweeter axis and 20° below it before tonal balance meaningfully shifts. One reviewer called it “a good speaker” with “a good price” rather than just good-for-the-price, and found it fairly neutral overall in-room.

Cons: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test, reducing it by about 5dB via EQ made a noticeable but not dramatic difference. Directivity error shows up around 3.3kHz, and the upper-midrange around 4-6kHz stood out as edgy and sharp, almost sibilant at times, in casual listening - the predicted in-room response shows a lack of energy between 1-2kHz and a bit too much above that, which one reviewer thought would sound bright. Distortion at 96dB SPL/1m shows two harmonic peaks the reviewer says “should not be there,” one from woofer breakup around 400Hz and another around 7-8kHz from the tweeter, and multitone distortion approaches 10% in the 500-800Hz range at that output level. Real compression shows up even at moderate volume and worsens at 96dB and above, with the woofer clearly giving up around 60-70Hz - a subwoofer is recommended for anyone wanting to listen loud, since running it full-range at high output costs real dynamic range in the midbass and bass. Don’t place it close to a wall - boundary reinforcement adds a midbass bump that undoes the otherwise smooth, linear response. Getting the best out of it takes EQ (taming the 700Hz peak, filling in the 1-2kHz dip, and trimming the highs).

Bass Extension (-10dB)40Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)64Hz (measured, Erin's Audio Corner)
Dimensions14.8"H x 7.7"W x 10.6"D (375.0 x 195.0 x 268.0 mm)
Drivers25mm tweeter + 165mm woofer
Impedance6 ohms nominal, 5.2 ohms minimum (measured, Erin's Audio Corner)
Sensitivity86.5dB (measured, Audio Science Review)
Weight29.1 lbs / 13.2 kg
Woofer Cabinetported, front

As an eBay Partner, we may be compensated if you make a purchase.