Short answer: the Behringer B2030P. It ranks #57 of 100 bookshelf speakers by sound quality at $220; the ELAC Debut 2.0 B6.2 ranks #62 and costs $329, so there is not much of a tradeoff to weigh.
The case for the Behringer B2030P: CEA2034 spinorama shows strong horizontal directivity control, keeping the response nearly constant off-axis through most of the audible spectrum, with a wide beamwidth that eases seating position and toe-in requirements. The tradeoff: A resonance around 800Hz shows up clearly in the on-axis response and the waterfall/CSD plot, and the flat, near-horizontal predicted in-room response makes it sound bright without an equalization target curve.
What the ELAC Debut 2.0 B6.2 gets right: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. The catch: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test.
Buy the Behringer B2030P. It ranks higher for sound quality than the ELAC Debut 2.0 B6.2 and costs less, so there is no real case for the other one.
Specifications Side By Side
| Behringer B2030P | ELAC Debut 2.0 B6.2 | |
|---|---|---|
| Price | $220 Discontinued | $329.00 |
| Ranked | #57 of 100 in Large Size Bookshelf Speakers | #62 of 100 in Large Size Bookshelf Speakers |
| Bass Extension (-3dB) | 79Hz (measured, Audio Science Review) | 64Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 60Hz (measured, Audio Science Review) | 40Hz (measured, Erin’s Audio Corner) |
| Drivers | 6.75" woofer, 0.75" ferrofluid-cooled tweeter | 25mm tweeter + 165mm woofer |
| Discontinued | Yes | - |
| Dimensions | 12.5H x 8.4W x 8.3D in | 14.8"H x 7.7"W x 10.6"D (375.0 x 195.0 x 268.0 mm) |
| Weight | 15.4 lbs / 7.0 kg each | 29.1 lbs / 13.2 kg |
| Frequency Response | 75Hz - 21kHz (Manufacturer specified) | - |
| Power Handling | up to 100W | - |
| Woofer Cabinet | ported, vertical slot | ported, front |
| Sensitivity | 84.5dB (2.83V/1m, measured, Audio Science Review) | 86.5dB (measured, Audio Science Review) |
| Impedance | - | 6 ohms nominal, 5.2 ohms minimum (measured, Erin’s Audio Corner) |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- JBL Studio 630 vs Infinity IL10
- Infinity IL10 vs SVS Prime Bookshelf
- SVS Prime Bookshelf vs Polk Monitor XT20
- Behringer B2030P vs Polk Monitor XT20
- ELAC Debut 2.0 B6.2 vs Polk Monitor XT20
The Two Speakers In Full
Behringer B2030P: $220 Discontinued
Pros: CEA2034 spinorama shows strong horizontal directivity control, keeping the response nearly constant off-axis through most of the audible spectrum, with a wide beamwidth that eases seating position and toe-in requirements. Distortion measurements hold up well against the pricier Revel M106 at both 86dB and 106dB SPL. With EQ to tame a resonance around 800Hz and a bit of a bass fill, the reviewer called it a “winner” that could play loud without bottoming out.
Cons: A resonance around 800Hz shows up clearly in the on-axis response and the waterfall/CSD plot, and the flat, near-horizontal predicted in-room response makes it sound bright without an equalization target curve. Vertical directivity is only typical, not exceptional. Long discontinued - the reviewer noted you’ll have to hunt for a used pair. Discontinued.
Full Behringer B2030P review and specifications →
| Bass Extension (-10dB) | 60Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 79Hz (measured, Audio Science Review) |
| Dimensions | 12.5H x 8.4W x 8.3D in |
| Discontinued | Yes |
| Drivers | 6.75" woofer, 0.75" ferrofluid-cooled tweeter |
| Frequency Response | 75Hz - 21kHz (Manufacturer specified) |
| Power Handling | up to 100W |
| Sensitivity | 84.5dB (2.83V/1m, measured, Audio Science Review) |
| Weight | 15.4 lbs / 7.0 kg each |
| Woofer Cabinet | ported, vertical slot |
As an eBay Partner, we may be compensated if you make a purchase.
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Behringer B2030P vs JBL Studio 630
- Behringer B2030P vs Infinity IL10
- Behringer B2030P vs Dynaudio Emit 20
- Behringer B2030P vs Klipsch RP-600M II
- Behringer B2030P vs Dynaudio Special Forty
- Behringer B2030P vs Infinity Reference R162
- Behringer B2030P vs SVS Prime Bookshelf
- Behringer B2030P vs KEF Q3 Meta
- See all 9 comparisons
ELAC Debut 2.0 B6.2: $329.00 Amazon Crutchfield
Pros: Reasonably flat on-axis and listening-window response with reasonably even horizontal directivity, holding about ±60° up to roughly 8kHz for consistent stereo width whether aimed directly at the listener or toed out. Its larger-than-typical woofer lets it play very loud with minimal distortion, staying under about 1% THD down to 50Hz at 86dB, and minimum impedance stays a comfortable 5-6 ohms. In-room bass extension reaches about 50Hz without much trouble, enough for a solid kick-drum sound. Takes equalization very well - correcting the on-axis response doesn’t cost sensitivity through the midrange, and the underlying directivity behavior (diffraction, vertical mismatch) is mild enough that EQ alone gets most of the way to a well-balanced sound. Vertical tolerance is asymmetric and fairly forgiving: about 10° above the tweeter axis and 20° below it before tonal balance meaningfully shifts. One reviewer called it “a good speaker” with “a good price” rather than just good-for-the-price, and found it fairly neutral overall in-room.
Cons: A good size resonant peak around 700Hz stands out from an otherwise smooth response and lingers in cumulative spectral decay (waterfall) measurements - in one reviewer’s sighted A/B test, reducing it by about 5dB via EQ made a noticeable but not dramatic difference. Directivity error shows up around 3.3kHz, and the upper-midrange around 4-6kHz stood out as edgy and sharp, almost sibilant at times, in casual listening - the predicted in-room response shows a lack of energy between 1-2kHz and a bit too much above that, which one reviewer thought would sound bright. Distortion at 96dB SPL/1m shows two harmonic peaks the reviewer says “should not be there,” one from woofer breakup around 400Hz and another around 7-8kHz from the tweeter, and multitone distortion approaches 10% in the 500-800Hz range at that output level. Real compression shows up even at moderate volume and worsens at 96dB and above, with the woofer clearly giving up around 60-70Hz - a subwoofer is recommended for anyone wanting to listen loud, since running it full-range at high output costs real dynamic range in the midbass and bass. Don’t place it close to a wall - boundary reinforcement adds a midbass bump that undoes the otherwise smooth, linear response. Getting the best out of it takes EQ (taming the 700Hz peak, filling in the 1-2kHz dip, and trimming the highs).
Full ELAC Debut 2.0 B6.2 review and specifications →
| Bass Extension (-10dB) | 40Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 64Hz (measured, Erin's Audio Corner) |
| Dimensions | 14.8"H x 7.7"W x 10.6"D (375.0 x 195.0 x 268.0 mm) |
| Drivers | 25mm tweeter + 165mm woofer |
| Impedance | 6 ohms nominal, 5.2 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 86.5dB (measured, Audio Science Review) |
| Weight | 29.1 lbs / 13.2 kg |
| Woofer Cabinet | ported, front |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Debut 2.0 B6.2 vs SVS Prime Bookshelf
- ELAC Debut 2.0 B6.2 vs Dynaudio Special Forty
- ELAC Debut 2.0 B6.2 vs KEF Q3 Meta
- ELAC Debut 2.0 B6.2 vs Polk Monitor XT20
- ELAC Debut 2.0 B6.2 vs Infinity IL10
- ELAC Debut 2.0 B6.2 vs GR-Research X-LS Encore
- ELAC Debut 2.0 B6.2 vs Sonus Faber Lumina II
- ELAC Debut 2.0 B6.2 vs Focal Aria 906
- See all 20 comparisons