Short answer: the Infinity IL10 for value, the Klipsch RP-600M II for the higher placement. The IL10 costs $160 and is impressively flat for a budget bookshelf, but it has resonances at 600 and 5kHz that show up as distinct distortion spikes at 96dB SPL/1m. The RP-600M II ranks #75 of 134 bookshelf speakers at $449.99, and its redesigned waveguide reduces diffraction versus the original, though its treble runs notably hot on-axis.
Buy the Klipsch RP-600M II. It is rated higher for sound quality and still sold new, while the Infinity IL10 is discontinued.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Klipsch RP-600M II | Infinity IL10 | |
|---|---|---|
| Price | $449.99 per pair | $160 per pair used, Discontinued |
| Ranked | #75 of 134 in Large Size Bookshelf Speakers | #87 of 134 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 44Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 70Hz (measured, Erin’s Audio Corner) | 59Hz (measured, Audio Science Review) |
| Dimensions | 15.7”H x 8”W x 12.5”D (398.8 x 203.2 x 317.5 mm) | 15.6”H x 8.5”W x 11.5”D (397.0 x 216.0 x 292.0 mm) |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin’s Audio Corner) | 6 ohms |
| Sensitivity | 86dB (measured, Erin’s Audio Corner) | 86dB (measured, Audio Science Review) |
| Drivers | 6.5” Cerametallic cone woofer, 1” titanium LTS vented tweeter with Tractrix horn | 6.5” (165mm) woofer |
| Weight | 13 lbs (5.9 kg) each | 14.3 lbs (6.5 kg) |
| Woofer Cabinet | ported | ported, rear |
| Spinorama Preference Score | 5.64 | 4.98 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 7.77 | 7.34 (spinorama.org) |
| DIY Kit | No | No |
Related Speaker Comparisons
More top alternatives to Klipsch RP-600M II:
- Klipsch RP-600M II vs TAD Compact Reference One (CR1TX)
- Klipsch RP-600M II vs Perlisten S4b
- Klipsch RP-600M II vs KEF Reference 1 Meta
- Klipsch RP-600M II vs GR-Research NX-Studio
- Klipsch RP-600M II vs March Audio Sointuva AWG
Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-600M II: $449.99 per pair Amazon eBay
Older model: the Klipsch RP-600M (ranked lower, rated 2.9/5).
Pros: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on: the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 86dB.
Cons: On-axis, the treble runs notably hot (even hotter than the original RP-600M in some respects) and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight: a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
Full Klipsch RP-600M II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 70Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 15.7”H x 8”W x 12.5”D (398.8 x 203.2 x 317.5 mm) |
| Drivers | 6.5” Cerametallic cone woofer, 1” titanium LTS vented tweeter with Tractrix horn |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Sensitivity | 86dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.64 |
| Spinorama Preference Score with Perfect Sub | 7.77 |
| Weight | 13 lbs (5.9 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: The Truth about Klipsch’s “NEW” Sound. RP-600M Update. More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Klipsch RP-600M II
- GR-Research: We Bought The "NEW" RP-600M II Is KLIPSCH Listening?! More from GR-Research →
- Erin’s Audio Corner: 5 AWESOME SPEAKERS Under $1000 You Won’t Regret
- Erin’s Audio Corner Measurements (spinorama.org)
- Erin’s Audio Corner: KEF Q1 Meta vs Emotiva vs Klipsch | The Real Differences
- Head-to-Head Comparisons
- Klipsch RP-600M II vs Aoshida Audio Musician Knight I V2
- Klipsch RP-600M II vs JBL 708i
- Klipsch RP-600M II vs Dynaudio Emit 20
- Klipsch RP-600M II vs PS Audio Aspen FR5
- Klipsch RP-600M II vs Philharmonic BMR Monitor
- Klipsch RP-600M II vs Theory Audio sb25
- Klipsch RP-600M II vs JBL Studio 630
- Klipsch RP-600M II vs Polk Signature Elite ES20
- See all 117 comparisons
Infinity IL10: $160 per pair used Discontinued eBay
Pros: Impressively flat for a budget bookshelf. Predicted in-room response is good aside from a bit of excess energy here and there. Distortion at 96dB SPL/1m stays low and controlled outside two narrow resonance-driven peaks. Measured bass extension of 59Hz (-3dB), with a measured sensitivity of 86dB.
Cons: Resonances at 600 and 5kHz, which show up as distinct distortion spikes at 96dB SPL/1m in the same frequency regions. Discontinued.
Full Infinity IL10 review and specifications →
| Bass Extension (-10dB) | 44Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 59Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 15.6”H x 8.5”W x 11.5”D (397.0 x 216.0 x 292.0 mm) |
| Drivers | 6.5” (165mm) woofer |
| Impedance | 6 ohms |
| Sensitivity | 86dB (measured, Audio Science Review) |
| Spinorama Preference Score | 4.98 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 7.34 (spinorama.org) |
| Weight | 14.3 lbs (6.5 kg) |
| Woofer Cabinet | ported, rear |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Infinity IL10 vs Dynaudio Special Forty
- Infinity IL10 vs ELAC Debut 2.0 B6.2
- Infinity IL10 vs SVS Prime Bookshelf
- Infinity IL10 vs KEF Q3 Meta
- Infinity IL10 vs Polk Monitor XT20
- Infinity IL10 vs Behringer B2030P
- Infinity IL10 vs Sonus Faber Lumina II
- Infinity IL10 vs JBL Studio 630
- See all 15 comparisons