Short answer: both are discontinued, so this only matters if you are buying used. Used, the Revel F208 is the better pick: it ranks #27 of 188 floorstanding speakers by sound quality (rated 4.5/5), against #124 (rated 3.8/5) for the Definitive Technology BP-9020. If you want one new, the Revel F228Be replaces the Revel F208 and is rated 4.5/5 at $11,000.
The Revel F208 is the more accurate option. CEA2034 spinorama shows a fairly even on-axis response with sensitivity matching spec at ~87-88dB. Its measured preference score, a predictor of how neutral it sounds, is 6.35 against 5.08 for the Definitive Technology BP-9020. The catch: Some directivity error and tweeter-response ripple right at the 2.2kHz crossover point.
The Definitive Technology BP-9020 is the deeper-bass choice. Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Its bass reaches about 35Hz before falling 3dB, against 47Hz for the Revel F208. The catch: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds.
Buy the Revel F208 only if you find one used in good condition; both are discontinued, and it is the better rated of the two. For a new speaker, buy the Revel F228Be, which replaces the Revel F208.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Revel F208 | Definitive Technology BP-9020 | |
|---|---|---|
| Price | $4,800 per pair used, Discontinued | $500 per pair Discontinued |
| Ranked | #27 of 188 in Large Size Floorstanding Speakers | #124 of 188 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 24Hz (measured, Audio Science Review) | 29Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 47Hz (measured, Audio Science Review) | 35Hz (measured, Erin’s Audio Corner) |
| Dimensions | 46.6”H x 13.5”W x 14.8”D (1183.6 x 342.9 x 375.9 mm) | 35.3”H x 11”W x 13”D (895.4 x 279.4 x 330.2 mm) |
| Impedance | 8 ohms nominal, 3.5 ohms minimum (measured, Audio Science Review) | 8 ohms nominal |
| Drivers | Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers, 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide | 1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwoofer |
| Sensitivity | 88.2dB (measured by Audio Science Review; 88.5dB manufacturer specified) | 87.7dB (measured average, Erin’s Audio Corner) |
| Weight | 79.4 lbs (36 kg) each | 30 lbs (13.6 kg) each |
| Woofer Cabinet | ported, front | ported, slot |
| Spinorama Preference Score | 6.35 | 5.08 |
| Spinorama Preference Score with Perfect Sub | 7.67 | 6.53 |
| DIY Kit | No | No |
Related Speaker Comparisons
More top alternatives to Revel F208:
- KEF Blade Two Meta vs Revel F208
- MoFi SourcePoint V10 Master Edition vs Revel F208
- Revel F208 vs MoFi SourcePoint 888
- Revel F208 vs Revel F328Be
- KEF R5 Meta vs Revel F208
Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel F208: $4,800 per pair used Discontinued eBay
Newer model: the Revel F228Be, ranked lower, rated 4.5/5.
Same family: the Revel M105 (smaller bookshelf, rated 4.2/5), the Revel M106 (larger bookshelf, rated 4.6/5), the Revel F206 (smaller floorstanding, ranked lower, rated 4.5/5), the Revel Performa3 C205 (smaller center, rated 4.1/5) and the Revel Performa3 C208 (larger center, rated 4/5).
Pros: CEA2034 spinorama shows a fairly even on-axis response with sensitivity matching spec at ~87-88dB. Predicted in-room response is a smooth, textbook-quality downward slope that should translate well to most rooms without correction. Early reflections sum so cleanly with the direct sound that side-wall absorption isn’t recommended: it would work against the speaker’s naturally well-integrated off-axis behavior. Distortion stays below 0.5% from 100Hz up at 96dB/1m, with all distortion components falling below audible threshold above 200Hz. Very wide horizontal directivity of about ±75 degrees. Measured performance was judged very close to Revel’s own flagship Salon2, and Revel’s speakers (including this one) are developed using Harman’s double-blind listening test methodology. Preference score of 7.4 (7.7 with a subwoofer added). Measured bass extension of 47Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Some directivity error and tweeter-response ripple right at the 2.2kHz crossover point. A notable on-axis dip at about 4kHz, attributed to probable cabinet diffraction. Cumulative spectral decay (waterfall) shows an unexplained resonance around 4-5kHz that the reviewer couldn’t pin down a clear cause for. Vertical directivity shows narrowband interference nulls just above and below the tweeter axis (roughly 2-3kHz), typical of a non-coaxial tower with vertically separated drivers, so listening height matters more than it would with a coincident design. Minimum impedance dips to 3.4 ohms, calling for a robust, high-current amplifier. Distortion climbs substantially below about 80-100Hz (up to ~5% in the deep bass) when driven hard, an excursion-limited trade-off typical of towers at high output. Isolating the woofers alone shows their usable range ending around 500-700Hz at the crossover, with somewhat elevated (though still low in absolute terms) 2nd/3rd harmonic distortion in the 100-300Hz region. Discontinued.
Full Revel F208 review and specifications →
| Bass Extension (-10dB) | 24Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 47Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 46.6”H x 13.5”W x 14.8”D (1183.6 x 342.9 x 375.9 mm) |
| Drivers | Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers, 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Impedance | 8 ohms nominal, 3.5 ohms minimum (measured, Audio Science Review) |
| Sensitivity | 88.2dB (measured by Audio Science Review; 88.5dB manufacturer specified) |
| Spinorama Preference Score | 6.35 |
| Spinorama Preference Score with Perfect Sub | 7.67 |
| Weight | 79.4 lbs (36 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Definitive Technology BP-9020: $500 per pair Discontinued eBay
Pros: Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Forward-Focused Bipolar Array technology (dual 3.5” front midrange drivers + 1” annealed aluminum dome tweeter, plus a 3.5” rear-firing midrange driver) creates a remarkably wide, spacious soundstage with broad room envelopment. On-axis frequency response stays smooth and relatively neutral when listened to directly aligned with the tweeter. Measured average sensitivity of 87.7dB SPL (2.83V/1m) allows comfortable drive from standard multi-channel receivers. Measured bass extension of 35Hz (-3dB), with a measured sensitivity of 87.7dB.
Cons: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds. Bipolar rear driver radiation creates a diffuse soundstage that compromises razor-sharp imaging focus and pinpoint instrument placement. DSP-based internal limiter aggressively compresses output below 80Hz at higher listening levels, causing lower mid-bass and sub-bass impact to diminish as volume increases. Midrange clarity shows slight ‘cuppiness’ and upper-frequency directivity irregularities due to front/rear driver interaction. Discontinued.
Full Definitive Technology BP-9020 review and specifications →
| Bass Extension (-10dB) | 29Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 35Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 35.3”H x 11”W x 13”D (895.4 x 279.4 x 330.2 mm) |
| Drivers | 1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwoofer |
| Impedance | 8 ohms nominal |
| Sensitivity | 87.7dB (measured average, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.08 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 30 lbs (13.6 kg) each |
| Woofer Cabinet | ported, slot |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Definitive Technology BP-9020 vs SVS Ultra Evolution Pinnacle
- Definitive Technology BP-9020 vs Polk T50
- Definitive Technology BP-9020 vs Klipsch RP-6000F II
- Definitive Technology BP-9020 vs Dynaudio Emit 30
- Definitive Technology BP-9020 vs Klipsch RP-8000F II
- Definitive Technology BP-9020 vs Focal Aria Evo X N°2
- Definitive Technology BP-9020 vs Klipsch RP-5000F II
- Definitive Technology BP-9020 vs KEF Q11 Meta
- See all 36 comparisons