Short answer: the Revel F208 for better sound quality, the Revel F206 for the lower price. The Revel F208 ranks #14 of 56 floorstanding speakers at $2400. The Revel F206 ranks #17 at $2000, $400 cheaper.
What the Revel F208 gets right: CEA2034 spinorama shows a fairly even on-axis response with sensitivity matching spec at ~87-88dB. The catch: Some directivity error and tweeter-response ripple right at the 2.2kHz crossover point.
What the Revel F206 offers: CEA2034 spinorama shows a pretty even on-axis response. Watch for: Some directivity error and a small peak around 4.5kHz show up alongside the directivity error around 3kHz.
Buy the Revel F208 if sound quality matters more than the price. Buy the Revel F206 if the price matters more than sound quality.
Specifications Side By Side
| Revel F208 | Revel F206 | |
|---|---|---|
| Price | $2400 used, Discontinued | $2000 used, Discontinued |
| Ranked | #14 of 56 in Large Size Floorstanding Speakers | #17 of 56 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 24Hz (measured, Audio Science Review) | 34Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 47Hz (measured, Audio Science Review) | 60Hz (measured, Audio Science Review) |
| Dimensions | 46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm) | 40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm) |
| Impedance | 8 ohms nominal, 3.5 ohms minimum (measured, Audio Science Review) | 4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review) |
| Drivers | Dual 8" (20 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide | Dual 6.5" (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Sensitivity | 88.2dB (measured by Audio Science Review; 88.5dB manufacturer specified) | 87dB (measured, Audio Science Review) |
| Weight | 79.4 lbs / 36 kg each | 57.3 lbs / 26 kg each |
| Woofer Cabinet | ported, front | ported, front |
| Discontinued | Yes | Yes |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Focal Chora 816 vs KEF R11 Meta
- Revel Concerta2 F35 vs KEF R11 Meta
- JBL Studio 698 vs JBL HDI-3600
- Revel F206 vs PSB Imagine T65
- KEF R5 vs Revel F206
The Two Speakers In Full
Revel F208: $2400 used, Discontinued
Pros: CEA2034 spinorama shows a fairly even on-axis response with sensitivity matching spec at ~87-88dB. Predicted in-room response is a smooth, textbook-quality downward slope that should translate well to most rooms without correction. Early reflections sum so cleanly with the direct sound that side-wall absorption isn’t recommended - it would work against the speaker’s naturally well-integrated off-axis behavior. Distortion stays below 0.5% from 100Hz up at 96dB/1m, with all distortion components falling below audible threshold above 200Hz. Very wide horizontal directivity of about ±75 degrees. Measured performance was judged very close to Revel’s own flagship Salon2, and Revel’s speakers (including this one) are developed using Harman’s double-blind listening test methodology. Preference score of 6.6 (7.7 with a subwoofer added).
Cons: Some directivity error and tweeter-response ripple right at the 2.2kHz crossover point. A notable on-axis dip at about 4kHz, attributed to probable cabinet diffraction. Cumulative spectral decay (waterfall) shows an unexplained resonance around 4-5kHz that the reviewer couldn’t pin down a clear cause for. Vertical directivity shows narrowband interference nulls just above and below the tweeter axis (roughly 2-3kHz), typical of a non-coaxial tower with vertically separated drivers, so listening height matters more than it would with a coincident design. Minimum impedance dips to 3.4 ohms, calling for a robust, high-current amplifier. Distortion climbs substantially below about 80-100Hz (up to ~5% in the deep bass) when driven hard, an excursion-limited trade-off typical of towers at high output. Isolating the woofers alone shows their usable range ending around 500-700Hz at the crossover, with somewhat elevated (though still low in absolute terms) 2nd/3rd harmonic distortion in the 100-300Hz region. Discontinued.
Full Revel F208 review and specifications →
| Bass Extension (-10dB) | 24Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 47Hz (measured, Audio Science Review) |
| Dimensions | 46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm) |
| Discontinued | Yes |
| Drivers | Dual 8" (20 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Impedance | 8 ohms nominal, 3.5 ohms minimum (measured, Audio Science Review) |
| Sensitivity | 88.2dB (measured by Audio Science Review; 88.5dB manufacturer specified) |
| Weight | 79.4 lbs / 36 kg each |
| Woofer Cabinet | ported, front |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Revel F206: $2000 used, Discontinued
Pros: CEA2034 spinorama shows a pretty even on-axis response. Predicted in-room response is excellent, with a smooth downward slope. Horizontal beamwidth of about ±65 degrees is wide, if a bit uneven. Distortion is very nice at 86dB SPL/1m, falling below the frequency range where human hearing is most sensitive, and stays excellent even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice suppression of port and woofer resonances. Really amazing value for the performance.
Cons: Some directivity error and a small peak around 4.5kHz show up alongside the directivity error around 3kHz. Vertical directivity means listening position needs to stay within the tweeter axis, though the reviewer notes there is some leeway. Minimum impedance dips to 3.3 ohms, calling for an amplifier comfortable with a demanding load. Discontinued.
Full Revel F206 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| Dimensions | 40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm) |
| Discontinued | Yes |
| Drivers | Dual 6.5" (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Impedance | 4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review) |
| Sensitivity | 87dB (measured, Audio Science Review) |
| Weight | 57.3 lbs / 26 kg each |
| Woofer Cabinet | ported, front |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons