Short answer: the PSB Imagine T65. It ranks #34 of 71 floorstanding speakers by sound quality; the Bose 901 Series V ranks #71.
What the PSB Imagine T65 offers: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2,699 tower - among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system - 100W drove it comfortably in Erin’s room. Watch for: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.
What the Bose 901 Series V offers: Historically distinctive direct/reflecting architecture uses eight rear-firing and one front-firing full-range drivers to create a very large, room-filling presentation. Erin measured a benign 6.2-ohm minimum impedance, so the raw electrical load is easier than many modern four-ohm speakers. The supplied active equalizer offers user-adjustable tonal balance and is integral to obtaining usable bandwidth. Watch for: Even with the required EQ, Erin measured only about 81dB sensitivity, grossly non-flat response, numerous impedance/resonance irregularities and very high distortion. Output above roughly 90-95dB at his seat became audibly poor; multitone testing reached only about 98dB before the distortion limit. The reflection-dominant radiation prevents precise imaging and makes results strongly room-dependent. It requires the proprietary equalizer and substantial amplifier power despite its benign impedance.
Buy the PSB Imagine T65 if sound quality matters more than the price. Buy the Bose 901 Series V if the price matters more than sound quality.
If sound quality matters at all to you, skip the Bose 901 Series V. It ranks near the bottom of the 71 floorstanding speakers, so look higher up the list instead.
Specifications Side By Side
| PSB Imagine T65 | Bose 901 Series V | |
|---|---|---|
| Price | $2,699 | Used availability Discontinued |
| Ranked | #34 of 71 in Large Size Floorstanding Speakers | #71 of 71 in Large Size Floorstanding Speakers |
| Drivers | 1" titanium dome tweeter, 5.25" woven carbon fiber midrange, 2x 6.5" woven carbon fiber woofers | Nine full-range drivers: eight rear-firing, one front-firing |
| Crossovers | 600Hz & 2000Hz, 4th-order Linkwitz-Riley | - |
| Dimensions | 38-13/16"H x 8-3/8"W x 13.5"D (986 x 213 x 343mm) | - |
| Weight | 44 lbs each | - |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum) | 6.2 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 85.1dB (measured average, Erin’s Audio Corner) | Approximately 81dB/2.83V/1m with tested EQ setting (measured, Erin’s Audio Corner) |
| Recommended Power | 20-200W | - |
| Bass Reflex | Dual rear slot ports, individual woofer chambers | - |
| Bass Extension (-3dB) | 47Hz (measured average, Erin’s Audio Corner) | 55.8Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 26Hz (measured average, Erin’s Audio Corner) | 34.5Hz (measured, Erin’s Audio Corner) |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) | - |
| Bass Extension | - | Strongly dependent on supplied active equalizer and room (measured, Erin’s Audio Corner) |
| Discontinued | - | Yes |
| DSP | - | External analog active equalizer required |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Q Acoustics 5040 vs KEF R5 Meta
- JBL HDI-3800 vs ELAC Debut 3.0 DF63
- KEF Reference 203 vs ELAC Debut 3.0 DF63
- PSB Imagine T65 vs SVS Ultra Evolution Pinnacle
- PSB Imagine T65 vs KEF R5
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
PSB Imagine T65: $2,699 The Audio Factory eBay
Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2,699 tower - among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system - 100W drove it comfortably in Erin’s room.
Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.
Full PSB Imagine T65 review and specifications →
| Bass Extension (-10dB) | 26Hz (measured average, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 47Hz (measured average, Erin's Audio Corner) |
| Bass Reflex | Dual rear slot ports, individual woofer chambers |
| Crossovers | 600Hz & 2000Hz, 4th-order Linkwitz-Riley |
| Dimensions | 38-13/16"H x 8-3/8"W x 13.5"D (986 x 213 x 343mm) |
| Drivers | 1" titanium dome tweeter, 5.25" woven carbon fiber midrange, 2x 6.5" woven carbon fiber woofers |
| Frequency Response | 28Hz - 20kHz (±1.5dB, manufacturer specified) |
| Impedance | 8 ohms nominal (3.3 ohms minimum measured by Erin's Audio Corner; manufacturer specifies 4 ohms minimum) |
| Recommended Power | 20-200W |
| Sensitivity | 85.1dB (measured average, Erin's Audio Corner) |
| Weight | 44 lbs each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- PSB Imagine T65 vs Q Acoustics 5040
- PSB Imagine T65 vs ELAC Debut 3.0 DF63
- PSB Imagine T65 vs Polk Audio Reserve R700
- PSB Imagine T65 vs Polk Reserve R500
- PSB Imagine T65 vs Emotiva Airmotiv T2+
- PSB Imagine T65 vs Definitive Technology BP-9020
- PSB Imagine T65 vs JBL HDI-3600
- PSB Imagine T65 vs Infinity Primus 360
- See all 41 comparisons
Bose 901 Series V: Used availability Discontinued Amazon eBay
Pros: Historically distinctive direct/reflecting architecture uses eight rear-firing and one front-firing full-range drivers to create a very large, room-filling presentation. Erin measured a benign 6.2-ohm minimum impedance, so the raw electrical load is easier than many modern four-ohm speakers. The supplied active equalizer offers user-adjustable tonal balance and is integral to obtaining usable bandwidth.
Cons: Even with the required EQ, Erin measured only about 81dB sensitivity, grossly non-flat response, numerous impedance/resonance irregularities and very high distortion. Output above roughly 90-95dB at his seat became audibly poor; multitone testing reached only about 98dB before the distortion limit. The reflection-dominant radiation prevents precise imaging and makes results strongly room-dependent. It requires the proprietary equalizer and substantial amplifier power despite its benign impedance. Discontinued.
Full Bose 901 Series V review and specifications →
| Bass Extension | Strongly dependent on supplied active equalizer and room (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-10dB) | 34.5Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 55.8Hz (measured, Erin's Audio Corner) |
| DSP | External analog active equalizer required |
| Discontinued | Yes |
| Drivers | Nine full-range drivers: eight rear-firing, one front-firing |
| Impedance | 6.2 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | Approximately 81dB/2.83V/1m with tested EQ setting (measured, Erin's Audio Corner) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Bose 901 Series V vs Triangle Esprit Antal Ez
- Bose 901 Series V vs JBL Studio 590
- Bose 901 Series V vs Børresen X3
- Bose 901 Series V vs Magnepan LRS+
- Bose 901 Series V vs JBL Stage 2 280F
- Bose 901 Series V vs Infinity Reference 253
- Bose 901 Series V vs Sony SS-CS3
- Bose 901 Series V vs Focal Aria Evo X N°2
- See all 24 comparisons