Short answer: the Focal Chora 816. It ranks #14 of 68 floorstanding speakers by sound quality at $900; the Klipsch RP-5000F II ranks #48 and costs $1199.98, so there is not much of a tradeoff to weigh.
What the Focal Chora 816 offers: CEA2034 spinorama shows a generally even on-axis response with nice bass extension and high sensitivity. Predicted in-room response is very good aside from a peak around 8kHz. Horizontal beamwidth of about ±60 degrees is typical and fairly controlled. Distortion is very low at 86dB SPL/1m and still usable at 96dB SPL/1m. Watch for: Some messiness appears between 500Hz-2kHz on-axis, including a dip around 550Hz. Vertical directivity narrows a little, so listening height matters more than with a coincident design. Cumulative spectral decay (waterfall) shows a fair bit of resonances lingering across the midrange. Distortion rises substantially in the 1-2kHz region at 96dB SPL/1m. Minimum impedance dips to about 3.9 ohms.
What the Klipsch RP-5000F II offers: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity. Watch for: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Buy the Focal Chora 816. It ranks higher for sound quality than the Klipsch RP-5000F II and costs less, so there is no real case for the other one.
Specifications Side By Side
| Focal Chora 816 | Klipsch RP-5000F II | |
|---|---|---|
| Price | $900 used, Discontinued | $1199.98 |
| Ranked | #14 of 68 in Large Size Floorstanding Speakers | #48 of 68 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 35Hz (measured, Audio Science Review) | 41Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) | 55Hz (measured, Erin’s Audio Corner) |
| Dimensions | 40.7"H x 11.8"W x 15.3"D (1033.8 x 299.7 x 388.6 mm) | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Impedance | 8 ohms nominal (3.9 ohms minimum, measured, Audio Science Review) | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) |
| Drivers | 6.5" (16.5cm) Slatefiber woofer, 6.5" (16.5cm) Slatefiber midrange, 1" (25mm) TNF Al/Mg inverted dome tweeter | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Sensitivity | 91dB (measured, Audio Science Review) | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Weight | 40.8 lbs / 18.5 kg each | 38.6 lbs / 17.5 kg |
| Discontinued | Yes | - |
| Woofer Cabinet | ported, front | ported, rear |
| Frequency Response | - | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Crossover Frequency | - | 1900Hz |
| Output Power | - | 100W continuous, 400W peak |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Revel F208 vs JBL Studio 698
- KEF Q11 Meta vs KLH Model Five
- Revel F208 vs Revel Concerta2 F35
- Revel Concerta2 F35 vs Klipsch RP-5000F II
- Klipsch RP-5000F II vs Monolith THX-365T
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Focal Chora 816: $900 used, Discontinued eBay
Pros: CEA2034 spinorama shows a generally even on-axis response with nice bass extension and high sensitivity. Predicted in-room response is very good aside from a peak around 8kHz. Horizontal beamwidth of about ±60 degrees is typical and fairly controlled. Distortion is very low at 86dB SPL/1m and still usable at 96dB SPL/1m.
Cons: Some messiness appears between 500Hz-2kHz on-axis, including a dip around 550Hz. Vertical directivity narrows a little, so listening height matters more than with a coincident design. Cumulative spectral decay (waterfall) shows a fair bit of resonances lingering across the midrange. Distortion rises substantially in the 1-2kHz region at 96dB SPL/1m. Minimum impedance dips to about 3.9 ohms. Discontinued.
Full Focal Chora 816 review and specifications →
| Bass Extension (-10dB) | 35Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| Dimensions | 40.7"H x 11.8"W x 15.3"D (1033.8 x 299.7 x 388.6 mm) |
| Discontinued | Yes |
| Drivers | 6.5" (16.5cm) Slatefiber woofer, 6.5" (16.5cm) Slatefiber midrange, 1" (25mm) TNF Al/Mg inverted dome tweeter |
| Impedance | 8 ohms nominal (3.9 ohms minimum, measured, Audio Science Review) |
| Sensitivity | 91dB (measured, Audio Science Review) |
| Weight | 40.8 lbs / 18.5 kg each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Klipsch RP-5000F II: $1199.98 Amazon eBay
Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity.
Cons: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Full Klipsch RP-5000F II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1900Hz |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin's Audio Corner) |
| Output Power | 100W continuous, 400W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) |
| Weight | 38.6 lbs / 17.5 kg |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-5000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-5000F II vs KEF Q11 Meta
- Klipsch RP-5000F II vs Monolith THX-365T
- Klipsch RP-5000F II vs Klipsch RP-8000F II
- Klipsch RP-5000F II vs Klipsch Heresy IV
- Klipsch RP-5000F II vs Dynaudio Emit 30
- Klipsch RP-5000F II vs Polk Audio XT60
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- See all 26 comparisons