Klipsch RP-5000F II vs KEF Reference 203

Last updated: August 24, 2026

Short answer: the KEF Reference 203 for better sound quality, the Klipsch RP-5000F II for the lower price. The KEF Reference 203 ranks #13 of 68 floorstanding speakers at $5000. The Klipsch RP-5000F II ranks #48 at $1199.98, $3800.02 cheaper.

What the Klipsch RP-5000F II offers: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity. Watch for: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.

What the KEF Reference 203 offers: An unusually accomplished 4-way design for its era: excellent on-axis linearity (within about +/-3dB), genuinely good directivity both horizontally (~55 degrees) and vertically (~40-50 degrees), and an estimated in-room response that closely matches what the reviewer actually heard. Distortion is excellent - under 1% harmonic above 80Hz at both 86dB and 96dB, and multitone stays around 1% even at 96dB. Bass reaches a real F3 of 51Hz (F10 37Hz), with in-room extension into the low-mid-40s. The reviewer’s overall listening notes were essentially “nothing stood out bad or good” - a genuinely neutral, accurate speaker with a distinctive rounded-baffle look that avoids the diffraction issues a flat baffle this wide would normally have. Watch for: This is a 20+ year old, long-discontinued speaker only findable secondhand (Facebook Marketplace, Craigslist, audio forums) - condition, driver matching, and component aging vary by unit, so audition before buying if at all possible. Demands a robust amplifier: impedance dips to about 3.6 ohms with an EPDR of 2.2 ohms. The small supertweeter shows minor breakup artifacts at the extremes of the vertical polar plot and some compression at very high output in the top octave, though neither was audible in normal listening.

Buy the Klipsch RP-5000F II if the price matters more than sound quality. Buy the KEF Reference 203 if sound quality matters more than the price.

Klipsch RP-5000F II vs KEF Reference 203

Specifications Side By Side

Klipsch RP-5000F II KEF Reference 203
Price$1199.98$5000 Discontinued
Ranked#48 of 68 in Large Size Floorstanding Speakers#13 of 68 in Large Size Floorstanding Speakers
Bass Extension (-10dB)41Hz (measured, Erin’s Audio Corner)37Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)55Hz (measured, Erin’s Audio Corner)51Hz (measured, Erin’s Audio Corner)
Sensitivity90dB (2.83V/1m, measured by Erin’s Audio Corner)88dB (2.83V/1m, measured by Erin’s Audio Corner)
Drivers1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers1x 0.75" supertweeter, coaxial 1" dome tweeter + 6.5" midrange, 2x 6.5" woofers
Weight38.6 lbs / 17.5 kg58 lbs / 26.3 kg (58 lb)
Impedance8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner)8 ohms nominal (3.6 ohms minimum, measured, Erin’s Audio Corner; 3.2 ohms per manufacturer spec)
Frequency Response40Hz - 25kHz (+-3dB, Manufacturer specified)55Hz - 55kHz ±3dB (Manufacturer specified)
Crossover Frequency1900Hz400Hz, 2.7kHz, 15kHz
Output Power100W continuous, 400W peak-
Dimensions36.1" x 8.1" x 14.8" (917 x 207 x 375 mm)1067H mm (42" tall)
Woofer Cabinetported, rearBass reflex, with switchable flat/cut/lifted bass ports for wall placement
Discontinued-Yes
Recommended Power-50-200W

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Klipsch RP-5000F II: $1199.98 Amazon eBay

Klipsch RP-5000F II ranking card

Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity.

Cons: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.

Bass Extension (-10dB)41Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)55Hz (measured, Erin's Audio Corner)
Crossover Frequency1900Hz
Dimensions36.1" x 8.1" x 14.8" (917 x 207 x 375 mm)
Drivers1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers
Frequency Response40Hz - 25kHz (+-3dB, Manufacturer specified)
Impedance8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin's Audio Corner)
Output Power100W continuous, 400W peak
Sensitivity90dB (2.83V/1m, measured by Erin's Audio Corner)
Weight38.6 lbs / 17.5 kg
Woofer Cabinetported, rear

KEF Reference 203: $5000 Discontinued eBay

KEF Reference 203 ranking card

Pros: An unusually accomplished 4-way design for its era: excellent on-axis linearity (within about +/-3dB), genuinely good directivity both horizontally (~55 degrees) and vertically (~40-50 degrees), and an estimated in-room response that closely matches what the reviewer actually heard. Distortion is excellent - under 1% harmonic above 80Hz at both 86dB and 96dB, and multitone stays around 1% even at 96dB. Bass reaches a real F3 of 51Hz (F10 37Hz), with in-room extension into the low-mid-40s. The reviewer’s overall listening notes were essentially “nothing stood out bad or good” - a genuinely neutral, accurate speaker with a distinctive rounded-baffle look that avoids the diffraction issues a flat baffle this wide would normally have.

Cons: This is a 20+ year old, long-discontinued speaker only findable secondhand (Facebook Marketplace, Craigslist, audio forums) - condition, driver matching, and component aging vary by unit, so audition before buying if at all possible. Demands a robust amplifier: impedance dips to about 3.6 ohms with an EPDR of 2.2 ohms. The small supertweeter shows minor breakup artifacts at the extremes of the vertical polar plot and some compression at very high output in the top octave, though neither was audible in normal listening. Discontinued.

Bass Extension (-10dB)37Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)51Hz (measured, Erin's Audio Corner)
Crossover Frequency400Hz, 2.7kHz, 15kHz
Dimensions1067H mm (42" tall)
DiscontinuedYes
Drivers1x 0.75" supertweeter, coaxial 1" dome tweeter + 6.5" midrange, 2x 6.5" woofers
Frequency Response55Hz - 55kHz ±3dB (Manufacturer specified)
Impedance8 ohms nominal (3.6 ohms minimum, measured, Erin's Audio Corner; 3.2 ohms per manufacturer spec)
Recommended Power50-200W
Sensitivity88dB (2.83V/1m, measured by Erin's Audio Corner)
Weight58 lbs / 26.3 kg (58 lb)
Woofer CabinetBass reflex, with switchable flat/cut/lifted bass ports for wall placement