JBL HDI-3600 vs Magnepan LRS+

Last updated: August 24, 2026

Short answer: the JBL HDI-3600 for better sound quality, the Magnepan LRS+ for the lower price. The JBL HDI-3600 ranks #28 of 68 floorstanding speakers at $3800. The Magnepan LRS+ ranks #62 at $1300, $2500 cheaper.

What the JBL HDI-3600 offers: CEA2034 spinorama shows a fairly even on-axis response and flat overall frequency response, with high 90dB sensitivity and very low distortion through the midrange. Triple 6.5” Advanced Aluminum Matrix woofers and a 1” compression driver in JBL’s HDI waveguide. Watch for: A wide shelving-down above 2kHz affects the in-room response, and vertical dispersion is a bigger issue than horizontal - the reviewer noted the dip is wider here than on the smaller HDI-1600, making it more audible. Narrow vertical sweet spot means careful listener-height positioning matters more than usual.

What the Magnepan LRS+ offers: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Delivers a uniquely dramatic and enveloping soundstage with genuinely three-dimensional depth effects that work across all music genres, not just classical or orchestral material as commonly assumed. Extremely tight, locked-in center-phantom imaging when set up correctly. Open-baffle design avoids the “boxy” enclosure coloration of conventional cabinet speakers. Multitone distortion is remarkably consistent from low to high frequency, a characteristic the reviewer hasn’t observed in conventional cone-and-dome speakers. Compression at high output stays modest (about 0.5-1dB) through the midrange and treble, giving roughly 20-26dB of usable dynamic range in that region. At its price, a strong contender for a dedicated secondary listening room, even if not a main-system replacement. Watch for: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it. Bass rolls off very quickly (F3 74Hz, F10 67Hz, described as falling off “like a rock”), making a subwoofer an absolute requirement for any low-end content. A roughly 3dB dip in the mid-bass (100-300Hz) region thins out vocal body and fullness compared to a conventional bookshelf speaker. A resonance/bump around 400Hz adds a mild boxy quality, though it responds well to about 2dB of EQ correction. Extraordinarily fussy about exact positioning - both seating height (must align with the acoustic reference point between the panel’s lower tie-down points) and horizontal aiming are unusually critical; moving just a couple of inches can cause treble content above roughly 500-600Hz to nearly vanish. Distinct off-axis cancellation zones exist directly to the sides of the panel, where very little sound is audible at all. Fails badly under extreme dynamic-transient testing in the bass, and the reviewer blew fuses pushing the speaker during testing - not built for high-volume or highly dynamic playback. A genuinely different category from conventional hi-fi speakers, requiring more setup patience and experimentation than a typical monopole design.

Buy the JBL HDI-3600 if sound quality matters more than the price. Buy the Magnepan LRS+ if the price matters more than sound quality.

If sound quality matters at all to you, skip the Magnepan LRS+. It ranks near the bottom of the 68 floorstanding speakers, so look higher up the list instead.

JBL HDI-3600 vs Magnepan LRS+

Specifications Side By Side

JBL HDI-3600 Magnepan LRS+
Price$3800$1300
Ranked#28 of 68 in Large Size Floorstanding Speakers#62 of 68 in Large Size Floorstanding Speakers
Bass Extension (-3dB)78Hz - the on-axis curve also shows an unusual step/dip around 40-55Hz that may be a near-field-scan artifact for this tower (measured, Audio Science Review)74Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)62Hz - the on-axis curve also shows an unusual step/dip around 40-55Hz that may be a near-field-scan artifact for this tower (measured, Audio Science Review)67Hz (measured, Erin’s Audio Corner)
Sensitivity89.5dB (2.83V/1m, measured, Audio Science Review)85.1dB (measured, Erin’s Audio Corner)
Impedance4 ohms nominal4 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner)
Frequency Response38Hz - 30kHz (+/-3dB) (Manufacturer specified)-
Drivers2410H-2 1" compression driver, 3x 6.5" Advanced Aluminum Matrix woofersFull-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections
Weight61.7 lbs / 28 kg each30 lbs / 13.6 kg
Dimensions40.5"H x 10.2"W x 13.5"D (1029 x 260 x 343 mm)48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm)
Woofer Cabinetported, dual rear-firingopen baffle

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

JBL HDI-3600: $3800 Audioadvice eBay

JBL HDI-3600 ranking card

Pros: CEA2034 spinorama shows a fairly even on-axis response and flat overall frequency response, with high 90dB sensitivity and very low distortion through the midrange. Triple 6.5” Advanced Aluminum Matrix woofers and a 1” compression driver in JBL’s HDI waveguide.

Cons: A wide shelving-down above 2kHz affects the in-room response, and vertical dispersion is a bigger issue than horizontal - the reviewer noted the dip is wider here than on the smaller HDI-1600, making it more audible. Narrow vertical sweet spot means careful listener-height positioning matters more than usual.

Bass Extension (-10dB)62Hz - the on-axis curve also shows an unusual step/dip around 40-55Hz that may be a near-field-scan artifact for this tower (measured, Audio Science Review)
Bass Extension (-3dB)78Hz - the on-axis curve also shows an unusual step/dip around 40-55Hz that may be a near-field-scan artifact for this tower (measured, Audio Science Review)
Dimensions40.5"H x 10.2"W x 13.5"D (1029 x 260 x 343 mm)
Drivers2410H-2 1" compression driver, 3x 6.5" Advanced Aluminum Matrix woofers
Frequency Response38Hz - 30kHz (+/-3dB) (Manufacturer specified)
Impedance4 ohms nominal
Sensitivity89.5dB (2.83V/1m, measured, Audio Science Review)
Weight61.7 lbs / 28 kg each
Woofer Cabinetported, dual rear-firing

Magnepan LRS+: $1300 Magnepan eBay

Magnepan LRS+ ranking card

Pros: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Delivers a uniquely dramatic and enveloping soundstage with genuinely three-dimensional depth effects that work across all music genres, not just classical or orchestral material as commonly assumed. Extremely tight, locked-in center-phantom imaging when set up correctly. Open-baffle design avoids the “boxy” enclosure coloration of conventional cabinet speakers. Multitone distortion is remarkably consistent from low to high frequency, a characteristic the reviewer hasn’t observed in conventional cone-and-dome speakers. Compression at high output stays modest (about 0.5-1dB) through the midrange and treble, giving roughly 20-26dB of usable dynamic range in that region. At its price, a strong contender for a dedicated secondary listening room, even if not a main-system replacement.

Cons: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it. Bass rolls off very quickly (F3 74Hz, F10 67Hz, described as falling off “like a rock”), making a subwoofer an absolute requirement for any low-end content. A roughly 3dB dip in the mid-bass (100-300Hz) region thins out vocal body and fullness compared to a conventional bookshelf speaker. A resonance/bump around 400Hz adds a mild boxy quality, though it responds well to about 2dB of EQ correction. Extraordinarily fussy about exact positioning - both seating height (must align with the acoustic reference point between the panel’s lower tie-down points) and horizontal aiming are unusually critical; moving just a couple of inches can cause treble content above roughly 500-600Hz to nearly vanish. Distinct off-axis cancellation zones exist directly to the sides of the panel, where very little sound is audible at all. Fails badly under extreme dynamic-transient testing in the bass, and the reviewer blew fuses pushing the speaker during testing - not built for high-volume or highly dynamic playback. A genuinely different category from conventional hi-fi speakers, requiring more setup patience and experimentation than a typical monopole design.

Bass Extension (-10dB)67Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)74Hz (measured, Erin's Audio Corner)
Dimensions48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm)
DriversFull-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections
Impedance4 ohms nominal, 3 ohms minimum (measured, Erin's Audio Corner)
Sensitivity85.1dB (measured, Erin's Audio Corner)
Weight30 lbs / 13.6 kg
Woofer Cabinetopen baffle