Short answer: the Infinity Reference 253. It ranks #48 of 56 floorstanding speakers by sound quality at $400; the Magnepan LRS+ ranks #50 and costs $1300, so there is not much of a tradeoff to weigh.
On the Infinity Reference 253 side: Horizontal beamwidth of about ±60 degrees is fairly smooth and well controlled. Set against that: CEA2034 spinorama and predicted in-room response both show elevated treble above 4kHz (“too hot”), a dip around 2kHz, and bass shelved down relative to the midrange.
What the Magnepan LRS+ offers: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Watch for: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it.
Buy the Infinity Reference 253. It ranks higher for sound quality than the Magnepan LRS+ and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip both of these and look higher up the 56 floorstanding speakers instead.
Specifications Side By Side
| Infinity Reference 253 | Magnepan LRS+ | |
|---|---|---|
| Price | $400 used, Discontinued | $1300 |
| Ranked | #48 of 56 in Large Size Floorstanding Speakers | #50 of 56 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 38Hz (measured, Audio Science Review) | 67Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 78Hz (measured, Audio Science Review) | 74Hz (measured, Erin’s Audio Corner) |
| Dimensions | 40.3"H x 6.8"W x 12.4"D (1023.6 x 172.7 x 315 mm) | 48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm) |
| Impedance | 6 ohms | 4 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner) |
| Drivers | Dual 5.25" (130mm) CMMD™ woofers, 5.25" (130mm) flat-piston CMMD™ midrange, 1" (25mm) CMMD™ tweeter | Full-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Sensitivity | 86.9dB (measured by Audio Science Review; 88dB manufacturer specified) | 85.1dB (measured, Erin’s Audio Corner) |
| Weight | 39.2 lbs / 17.8 kg each | 30 lbs / 13.6 kg |
| Woofer Cabinet | ported, rear | open baffle |
| Discontinued | Yes | - |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Dynaudio Emit 30 vs Sony SS-CS3
- Klipsch RP-5000F II vs Sony SS-CS3
- Dynaudio Emit 30 vs JBL Stage 2 280F
- Dynaudio Emit 30 vs Infinity Reference 253
- Sony SS-CS3 vs Magnepan LRS+
The Two Speakers In Full
Infinity Reference 253: $400 used, Discontinued
Pros: Horizontal beamwidth of about ±60 degrees is fairly smooth and well controlled. Really amazing value for the performance.
Cons: CEA2034 spinorama and predicted in-room response both show elevated treble above 4kHz (“too hot”), a dip around 2kHz, and bass shelved down relative to the midrange. Vertical directivity requires staying at or below the tweeter axis for accurate tonal balance. Distortion at 96dB SPL/1m is broadly elevated above the reviewer’s audibility threshold across much of the midrange. Minimum impedance dips to 4.2 ohms. Discontinued.
Full Infinity Reference 253 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 78Hz (measured, Audio Science Review) |
| Dimensions | 40.3"H x 6.8"W x 12.4"D (1023.6 x 172.7 x 315 mm) |
| Discontinued | Yes |
| Drivers | Dual 5.25" (130mm) CMMD™ woofers, 5.25" (130mm) flat-piston CMMD™ midrange, 1" (25mm) CMMD™ tweeter |
| Impedance | 6 ohms |
| Sensitivity | 86.9dB (measured by Audio Science Review; 88dB manufacturer specified) |
| Weight | 39.2 lbs / 17.8 kg each |
| Woofer Cabinet | ported, rear |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Infinity Reference 253 vs JBL Stage 2 280F
- Infinity Reference 253 vs Sony SS-CS3
- Infinity Reference 253 vs Focal Aria Evo X N°2
- Infinity Reference 253 vs Polk T50
- Infinity Reference 253 vs Klipsch RP-6000F II
- Infinity Reference 253 vs Dynaudio Emit 30
- Infinity Reference 253 vs Klipsch RP-8000F II
- Infinity Reference 253 vs JBL Studio 590
- See all 14 comparisons
Magnepan LRS+: $1300 Magnepan
Pros: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Delivers a uniquely dramatic and enveloping soundstage with genuinely three-dimensional depth effects that work across all music genres, not just classical or orchestral material as commonly assumed. Extremely tight, locked-in center-phantom imaging when set up correctly. Open-baffle design avoids the “boxy” enclosure coloration of conventional cabinet speakers. Multitone distortion is remarkably consistent from low to high frequency, a characteristic the reviewer hasn’t observed in conventional cone-and-dome speakers. Compression at high output stays modest (about 0.5-1dB) through the midrange and treble, giving roughly 20-26dB of usable dynamic range in that region. At its price, a strong contender for a dedicated secondary listening room, even if not a main-system replacement.
Cons: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it. Bass rolls off very quickly (F3 74Hz, F10 67Hz, described as falling off “like a rock”), making a subwoofer an absolute requirement for any low-end content. A roughly 3dB dip in the mid-bass (100-300Hz) region thins out vocal body and fullness compared to a conventional bookshelf speaker. A resonance/bump around 400Hz adds a mild boxy quality, though it responds well to about 2dB of EQ correction. Extraordinarily fussy about exact positioning - both seating height (must align with the acoustic reference point between the panel’s lower tie-down points) and horizontal aiming are unusually critical; moving just a couple of inches can cause treble content above roughly 500-600Hz to nearly vanish. Distinct off-axis cancellation zones exist directly to the sides of the panel, where very little sound is audible at all. Fails badly under extreme dynamic-transient testing in the bass, and the reviewer blew fuses pushing the speaker during testing - not built for high-volume or highly dynamic playback. A genuinely different category from conventional hi-fi speakers, requiring more setup patience and experimentation than a typical monopole design.
Full Magnepan LRS+ review and specifications →
| Bass Extension (-10dB) | 67Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 74Hz (measured, Erin's Audio Corner) |
| Dimensions | 48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm) |
| Drivers | Full-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Impedance | 4 ohms nominal, 3 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 85.1dB (measured, Erin's Audio Corner) |
| Weight | 30 lbs / 13.6 kg |
| Woofer Cabinet | open baffle |
As an eBay Partner, we may be compensated if you make a purchase.
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons