Short answer: the Wharfedale Linton 85. It ranks #32 of 131 bookshelf speakers by sound quality at $1699.99; the Dynaudio Contour 20i ranks #60 and costs $5750, so there is not much of a tradeoff to weigh.
What the Wharfedale Linton 85 offers: Very neutral frequency response and good bass extension. Watch for: The spacing of the drivers makes the vertical off axis not very good
What the Dynaudio Contour 20i offers: Two-way design with a 1.125” Esotar2i silk dome tweeter and a 7” magnesium silicate polymer woofer in a vented enclosure. A shallow bass rolloff profile lets it sit closer to a wall (about 1-2 feet worked best in testing) without becoming boomy, and makes subwoofer integration comparatively easy. Very wide horizontal radiation (about ±70° through the midrange) gives an enveloping, spacious sound in a suitably sized room. On-axis response holds within about ±3dB overall and ±1.5dB through the midrange. Attractive build quality with a distinctive metal front baffle and gloss finish options. Long-term compression stays good up to 96dB, and short-term compression is within about 0.5dB at that same level. Watch for: Notably room-dependent: sounds too bright in the lower treble in smaller rooms with close sidewalls, needing sidewall absorption to sound neutral, while performing better in larger or more open rooms without that treatment. A roughly 2dB lift in the lower treble combined with wide dispersion means more energy reflecting off sidewalls than some listeners will prefer. Relatively low sensitivity (about 82.5dB measured). Unusually sensitive to amplifier output impedance - high-output-impedance amps like tube or SET designs introduce up to a 2dB dip in the midrange, making the sound more mellow rather than “warmer,” the opposite of what many tube-amp buyers expect. Elevated harmonic and multitone distortion around 700Hz, which the reviewer attributes to typical cone-edge/surround behavior common across many driver brands, though it stands out on the measurement graphs. An upper-midrange dip around 2kHz can reduce attack and clarity on vocals and brass instruments. Vertical listening window is fairly narrow (roughly -20° to +30°) - moving outside that range causes a noticeable tonal shift, unlike coaxial designs that tolerate more vertical movement.
Buy the Wharfedale Linton 85. It ranks higher for sound quality than the Dynaudio Contour 20i and costs less, so there is no real case for the other one.
Specifications Side By Side
| Wharfedale Linton 85 | Dynaudio Contour 20i | |
|---|---|---|
| Price | $1699.99 | $5750 |
| Ranked | #32 of 131 in Large Size Bookshelf Speakers | #60 of 131 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 35Hz (measured, Erin’s Audio Corner) | 32Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 52Hz (measured, Erin’s Audio Corner) | 56Hz (measured, Erin’s Audio Corner) |
| Dimensions | 22.2"H x 11.8"W x 13"D (563.9 x 299.7 x 330.2 mm) | 17.4"H x 8.5"W x 14.2"D (442 x 215.9 x 360.7 mm) |
| Impedance | 6 ohms nominal, 3.5 ohms minimum (measured above 80Hz, Erin’s Audio Corner) | 4 ohms |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter | 18 cm MSP woofer, 28mm Esotar 2i with Hexis tweeter |
| Sensitivity | 85.1dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin’s Audio Corner) | 82.5dB |
| Weight | 40.6 lbs / 18.4 kg each | 30.9 lbs / 14 kg each |
| Woofer Cabinet | ported, rear | ported, rear |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- ELAC Debut 3.0 DB63 vs Perlisten S5m
- GR-Research NX-Studio vs HiVi Swans 3.1A Sehlin Sound Solutions mod
- HiVi Swans 3.1A Sehlin Sound Solutions mod vs MoFi SourcePoint 10
- Technics SB-C700 vs Dynaudio Contour 20i
- JBL HDI-1600 vs Dynaudio Contour 20i
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Linton 85: $1699.99 Crutchfield eBay
Pros: Very neutral frequency response and good bass extension.
Cons: The spacing of the drivers makes the vertical off axis not very good
Full Wharfedale Linton 85 review and specifications →
| Bass Extension (-10dB) | 35Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.2"H x 11.8"W x 13"D (563.9 x 299.7 x 330.2 mm) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter |
| Impedance | 6 ohms nominal, 3.5 ohms minimum (measured above 80Hz, Erin's Audio Corner) |
| Sensitivity | 85.1dB (measured average 300Hz-3kHz @ 2.83V/1m, Erin's Audio Corner) |
| Weight | 40.6 lbs / 18.4 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Discover Why I Can’t Stop Raving About the Wharfedale Linton 85th Anniversary Speaker More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Linton 85 Review
- Erin’s Audio Corner: My Top 5 Speakers at Any Price
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner Measurements (spinorama.org)
- Reddit Search for Wharfedale Linton 85 Review
- Head-to-Head Comparisons
- Wharfedale Linton 85 vs Revel M126Be
- Wharfedale Linton 85 vs ELAC VELA BS 403
- Wharfedale Linton 85 vs Dynaudio Heritage Special
- Wharfedale Linton 85 vs GR-Research NX-Bravo
- Wharfedale Linton 85 vs Wharfedale Super Linton
- Wharfedale Linton 85 vs Emotiva Airmotiv XB2
- Wharfedale Linton 85 vs ELAC Debut 3.0 DB63
- Wharfedale Linton 85 vs JBL HDI-1600
- See all 38 comparisons
Dynaudio Contour 20i: $5750 Safeandsoundhq eBay
Pros: Two-way design with a 1.125” Esotar2i silk dome tweeter and a 7” magnesium silicate polymer woofer in a vented enclosure. A shallow bass rolloff profile lets it sit closer to a wall (about 1-2 feet worked best in testing) without becoming boomy, and makes subwoofer integration comparatively easy. Very wide horizontal radiation (about ±70° through the midrange) gives an enveloping, spacious sound in a suitably sized room. On-axis response holds within about ±3dB overall and ±1.5dB through the midrange. Attractive build quality with a distinctive metal front baffle and gloss finish options. Long-term compression stays good up to 96dB, and short-term compression is within about 0.5dB at that same level.
Cons: Notably room-dependent: sounds too bright in the lower treble in smaller rooms with close sidewalls, needing sidewall absorption to sound neutral, while performing better in larger or more open rooms without that treatment. A roughly 2dB lift in the lower treble combined with wide dispersion means more energy reflecting off sidewalls than some listeners will prefer. Relatively low sensitivity (about 82.5dB measured). Unusually sensitive to amplifier output impedance - high-output-impedance amps like tube or SET designs introduce up to a 2dB dip in the midrange, making the sound more mellow rather than “warmer,” the opposite of what many tube-amp buyers expect. Elevated harmonic and multitone distortion around 700Hz, which the reviewer attributes to typical cone-edge/surround behavior common across many driver brands, though it stands out on the measurement graphs. An upper-midrange dip around 2kHz can reduce attack and clarity on vocals and brass instruments. Vertical listening window is fairly narrow (roughly -20° to +30°) - moving outside that range causes a noticeable tonal shift, unlike coaxial designs that tolerate more vertical movement.
Full Dynaudio Contour 20i review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 17.4"H x 8.5"W x 14.2"D (442 x 215.9 x 360.7 mm) |
| Drivers | 18 cm MSP woofer, 28mm Esotar 2i with Hexis tweeter |
| Impedance | 4 ohms |
| Sensitivity | 82.5dB |
| Weight | 30.9 lbs / 14 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Contour 20i vs SVS Ultra Bookshelf
- Dynaudio Contour 20i vs Technics SB-C700
- Dynaudio Contour 20i vs Definitive Technology Demand D11
- Dynaudio Contour 20i vs Yamaha NS-800A
- Dynaudio Contour 20i vs ELAC DBR62
- Dynaudio Contour 20i vs ELAC Uni-Fi Reference UBR62
- Dynaudio Contour 20i vs Infinity Reference R162
- Dynaudio Contour 20i vs Danley SH50
- See all 19 comparisons