Earfun Uboom L vs Klipsch Groove/Heritage Groove

Last updated: September 26, 2026

Short answer: the Earfun Uboom L. It ranks #1 of 144 medium speakers by sound quality, rated 4.6/5, at $49.79; the Klipsch Groove/Heritage Groove ranks #95, rated 2.8/5, and costs $89, so there is little reason to consider the other one.

Earfun Uboom L vs Klipsch Groove/Heritage Groove

The case for the Earfun Uboom L: One of the strongest small-speaker values for music: reviews praise clear vocals, a natural overall balance and a genuinely convincing stereo image when two are paired. The tradeoff: It cannot produce real low-bass rumble or fill a large, noisy space, and the top end loses some detail.

Why pick the Klipsch Groove/Heritage Groove: Pretty balanced sound. The catch: Not stereo.

Buy the Earfun Uboom L. It is rated higher for sound quality than the Klipsch Groove/Heritage Groove and costs less, so it is the default pick unless a specific strength of the other one matters more to you.

There is a real battery-life gap here: the Earfun Uboom L is rated for 16 hours, the Klipsch Groove/Heritage Groove only 8 hours.

If water resistance matters to you, the Earfun Uboom L at IP67 (brief submersion) holds up far better than the Klipsch Groove/Heritage Groove at IPX4 (Groove), none (Heritage Groove) (splashing).

Looking for alternatives? See the complete Portable Bluetooth rankings.

Specifications Side By Side

Earfun Uboom L Klipsch Groove/Heritage Groove
Price$49.79 after coupon UBOOMLWC$89.00
Ranked#1 of 144 in Medium Size Portable Bluetooth Speakers#95 of 144 in Medium Size Portable Bluetooth Speakers
AppYes (firmware >= 1.2.6)No
Aux InputYesYes
Aux Latency216ms-
Bass Extension (-10dB)56Hz-
Battery Life16 hours (Manufacturer specified)8 hours (Manufacturer specified)
Bluetooth CodecsAAC, SBCSBC, AAC
Built-in MicrophoneYesYes
EQYes (10 band, firmware >= 1.2.6)No
IP RatingIP67IPX4 (Groove), none (Heritage Groove)
Bluetooth Latency400ms normal / 66ms low latency mode-
Maximum SPL103dB (measured by Alan Ross Reviews)-
Party ModeNoNo
Power BankNoNo
Power InputUSB-CMicro USB
StereoYesNo
OmnidirectionalNoNo
TWSYesNo
Weight1.4 lbs (650 g)1.7 lbs (770 g)
Bluetooth Version5.04.0
Dimensions3.1” x 8.3” x 2.8” (78 x 210 x 72 mm)5” x 6” x 2.6” (127 x 152 x 67 mm)
Drivers2x 55mm drivers + 2x passive radiators1x 3” full-range driver + 2x side-firing passive radiators
Amplifier Power28W10W RMS
Digital Aux InputNoNo

How Earfun Uboom L compares with other leading options:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Earfun Uboom L: $49.79 after coupon UBOOMLWC Amazon EarFun eBay

Earfun Uboom L ranking card

Pros: One of the strongest small-speaker values for music: reviews praise clear vocals, a natural overall balance and a genuinely convincing stereo image when two are paired. IP67 protection, indoor/outdoor sound modes and Video Mode make it unusually adaptable; Video Mode substantially improves lip-sync for a single speaker. Measured bass extension of 56Hz (-10dB).

Cons: It cannot produce real low-bass rumble or fill a large, noisy space, and the top end loses some detail. Low-latency Video Mode disables stereo pairing, so a two-speaker setup is not a good movie system. Firmware and app behavior have also varied over the model’s long life, and the physical controls can be easy to trigger in a bag. Latency is about 400ms by default and 66ms in Video Mode, which you enable by pressing the Bluetooth button twice.

Setup: Try setting up the Earfun App (Android or iOS) to see if that works. If not, you’ll need to flash firmware 1.2.7 to work with the app and set with Oluv’s EQ in the Earfun app which sounds the best. The instructions say that you need a USB3 cable, but most USB2 cables work just fine, try the one included with your phone. Check the current firmware version by turning it on, then pressing the power and Bluetooth buttons at the same time. To flash, turn the speaker off then hold down the Bluetooth button while plugging in the cable. To flash on a mac, see these instructions. In TWS mode, long press the outdoor button for 2 seconds to change TWS to Party mode and back.

Amplifier Power28W
AppYes (firmware >= 1.2.6)
Aux InputYes
Aux Latency216ms
Bass Extension (-10dB)56Hz
Battery Life16 hours (Manufacturer specified)
Bluetooth CodecsAAC, SBC
Bluetooth Latency400ms normal / 66ms low latency mode
Bluetooth Version5.0
Built-in MicrophoneYes
Digital Aux InputNo
Dimensions3.1” x 8.3” x 2.8” (78 x 210 x 72 mm)
Drivers2x 55mm drivers + 2x passive radiators
EQYes (10 band, firmware >= 1.2.6)
IP RatingIP67
Maximum SPL103dB (measured by Alan Ross Reviews)
OmnidirectionalNo
Party ModeNo
Power BankNo
Power InputUSB-C
StereoYes
TWSYes
Weight1.4 lbs (650 g)

Klipsch Groove/Heritage Groove: $89.00 Amazon eBay

Klipsch Groove/Heritage Groove ranking card

Pros: Pretty balanced sound. Distinctive mid-century design with real wood veneer and a woven grille, unlike most plastic/rubber portables. ~8 hour battery life.

Cons: Not stereo. Bass doesn’t go as deep as others its size. Gets distorted at higher levels. Wouldn’t generally recommend these old speakers as they can’t compete with modern speakers for bass performance and features.

Amplifier Power10W RMS
AppNo
Aux InputYes
Battery Life8 hours (Manufacturer specified)
Bluetooth CodecsSBC, AAC
Bluetooth Version4.0
Built-in MicrophoneYes
Digital Aux InputNo
Dimensions5” x 6” x 2.6” (127 x 152 x 67 mm)
Drivers1x 3” full-range driver + 2x side-firing passive radiators
EQNo
IP RatingIPX4 (Groove), none (Heritage Groove)
OmnidirectionalNo
Party ModeNo
Power BankNo
Power InputMicro USB
StereoNo
TWSNo
Weight1.7 lbs (770 g)