Earfun Uboom L vs B&O Beosound A1 2nd gen

Last updated: September 16, 2026

Short answer: the Earfun Uboom L. It ranks #1 of 142 medium speakers by sound quality at $49.79; the B&O Beosound A1 2nd gen ranks #10 and costs $395, which makes this an easy call rather than a real tradeoff.

Earfun Uboom L vs B&O Beosound A1 2nd gen

What the Earfun Uboom L offers: One of the strongest small-speaker values for music: reviews praise clear vocals, a natural overall balance and a genuinely convincing stereo image when two are paired. IP67 protection, indoor/outdoor sound modes and Video Mode make it unusually adaptable; Video Mode substantially improves lip-sync for a single speaker. Watch for: It cannot produce real low-bass rumble or fill a large, noisy space, and RTINGS finds the top end loses detail. Low-latency Video Mode disables stereo pairing, so a two-speaker setup is not a good movie system. Firmware and app behavior have also varied over the model’s long life, and the physical controls can be easy to trigger in a bag.

What the B&O Beosound A1 2nd gen offers: B&O Beosound A1 2nd gen uses 3.5mm aluminium driver + 0.75 inch silk dome tweeter. Its 558 g, claimed 18 hours (Manufacturer specified) battery life, IP67 protection, up to 93dB and mono playback make it a practical option for its intended room or portable use. Watch for: Bass is limited by its 58Hz specification.

Buy the Earfun Uboom L. It ranks higher for sound quality than the B&O Beosound A1 2nd gen and costs less, so there is no real case for the other one.

Still deciding? The full Portable Bluetooth rankings cover every ranked option.

Specifications Side By Side

Earfun Uboom L B&O Beosound A1 2nd gen
Price$49.79 after coupon UBOOMLWC$395.00
Ranked#1 of 142 in Medium Size Portable Bluetooth Speakers#10 of 142 in Medium Size Portable Bluetooth Speakers
AppYes (firmware >= 1.2.6)Yes
Aux InputYesNo
Aux Latency216ms-
Bass Extension (-10dB)56Hz58Hz
Battery Life16 hours (Manufacturer specified)18 hours (Manufacturer specified)
Bluetooth CodecsAAC, SBCSBC, AAC, aptX Adaptive
Built-in MicrophoneYesYes
EQYes (10 band, firmware >= 1.2.6)Yes
IP RatingIP67IP67
Bluetooth Latency400ms normal / 66ms low latency mode90ms
Maximum SPL103dB (measured by Alan Ross Reviews)93dB (measured by Alan Ross Reviews)
Party ModeNo-
Power BankNoNo
Power InputUSB-CUSB-C
StereoYesNo
OmnidirectionalNoPointing up
TWSYesYes
Weight1.4 lbs (650 g)1.2 lbs (558 g)
Bluetooth Version5.0-
Dimensions3.1" x 8.3" x 2.8" (78 x 210 x 72 mm)-
Drivers2x 55mm drivers + 2x passive radiators3.5mm aluminium driver + 0.75 inch silk dome tweeter
Amplifier Power28W-
Digital Aux InputNoYes (USB-C)

More top alternatives to Earfun Uboom L:

Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Earfun Uboom L: $49.79 after coupon UBOOMLWC Amazon Myearfun eBay

Earfun Uboom L ranking card

Pros: One of the strongest small-speaker values for music: reviews praise clear vocals, a natural overall balance and a genuinely convincing stereo image when two are paired. IP67 protection, indoor/outdoor sound modes and Video Mode make it unusually adaptable; Video Mode substantially improves lip-sync for a single speaker. Measured bass extension of 56Hz (-10dB).

Cons: It cannot produce real low-bass rumble or fill a large, noisy space, and RTINGS finds the top end loses detail. Low-latency Video Mode disables stereo pairing, so a two-speaker setup is not a good movie system. Firmware and app behavior have also varied over the model’s long life, and the physical controls can be easy to trigger in a bag.

Setup: Try setting up the Earfun App (Android or iOS) to see if that works. If not, you’ll need to flash firmware 1.2.7 to work with the app and set with Oluv’s EQ in the Earfun app which sounds the best. The instructions say that you need a USB3 cable, but most USB2 cables work just fine, try the one included with your phone. Check the current firmware version by turning it on, then pressing the power and Bluetooth buttons at the same time. To flash, turn the speaker off then hold down the Bluetooth button while plugging in the cable. To flash on a mac, see these instructions. In TWS mode, long press the outdoor button for 2 seconds to change TWS to Party mode and back.

Amplifier Power28W
AppYes (firmware >= 1.2.6)
Aux InputYes
Aux Latency216ms
Bass Extension (-10dB)56Hz
Battery Life16 hours (Manufacturer specified)
Bluetooth CodecsAAC, SBC
Bluetooth Latency400ms normal / 66ms low latency mode
Bluetooth Version5.0
Built-in MicrophoneYes
Digital Aux InputNo
Dimensions3.1" x 8.3" x 2.8" (78 x 210 x 72 mm)
Drivers2x 55mm drivers + 2x passive radiators
EQYes (10 band, firmware >= 1.2.6)
IP RatingIP67
Maximum SPL103dB (measured by Alan Ross Reviews)
OmnidirectionalNo
Party ModeNo
Power BankNo
Power InputUSB-C
StereoYes
TWSYes
Weight1.4 lbs (650 g)

B&O Beosound A1 2nd gen: $395.00 Amazon eBay

B&O Beosound A1 2nd gen ranking card

Pros: B&O Beosound A1 2nd gen uses 3.5mm aluminium driver + 0.75 inch silk dome tweeter. Its 558 g, claimed 18 hours (Manufacturer specified) battery life, IP67 protection, up to 93dB and mono playback make it a practical option for its intended room or portable use. Measured bass extension of 58Hz (-10dB).

Cons: Bass is limited by its 58Hz specification.

AppYes
Aux InputNo
Bass Extension (-10dB)58Hz
Battery Life18 hours (Manufacturer specified)
Bluetooth CodecsSBC, AAC, aptX Adaptive
Bluetooth Latency90ms
Built-in MicrophoneYes
Digital Aux InputYes (USB-C)
Drivers3.5mm aluminium driver + 0.75 inch silk dome tweeter
EQYes
IP RatingIP67
Maximum SPL93dB (measured by Alan Ross Reviews)
OmnidirectionalPointing up
Power BankNo
Power InputUSB-C
StereoNo
TWSYes
Weight1.2 lbs (558 g)