Short answer: the MoFi SourcePoint 8 if sound quality matters most, the JBL HDI-1600 if price matters most. The MoFi SourcePoint 8 ranks #17 of 130 bookshelf speakers at $2594. The JBL HDI-1600 ranks #44 at $1980, $614 cheaper.
What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
What the JBL HDI-1600 offers: CEA2034 spinorama is very flat in the critical mid-to-upper frequencies, with a slight bass boost that should have a good subjective effect and very smooth early-window directivity. Predicted in-room response in a simulated average listening room closely tracks the reviewer’s own preferred target curve. Watch for: A dip appears above 10kHz on-axis. Cumulative spectral decay (waterfall) shows some messiness around the crossover along with a 700Hz resonance. Harmonic distortion rises to nearly 2% right at the 1.9kHz crossover point at 96dB SPL/1m.
Buy the MoFi SourcePoint 8 if sound quality is the priority over the price, or the JBL HDI-1600 if the price is the priority over sound quality.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| MoFi SourcePoint 8 | JBL HDI-1600 | |
|---|---|---|
| Price | $2594 per pair | $1980 per pair Discontinued |
| Ranked | #17 of 130 in Large Size Bookshelf Speakers | #44 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) | 55Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) | 70Hz (measured, Audio Science Review) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) | 14.6"H x 9.1"W x 11.4"D (370.0 x 230.0 x 288.9 mm) |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) | 4 ohms nominal (measured, Audio Science Review) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) | 85dB (2.83V/1m, measured, Audio Science Review) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter | 1" tweeter + 6.5" woofer |
| Weight | 28 lbs (12.7 kg) each | 53.4 lbs (24.2 kg) |
| Woofer Cabinet | ported, rear | ported, rear |
| Spinorama Preference Score | 4.39 | - |
| Spinorama Preference Score with Perfect Sub | 6.53 | - |
| Discontinued | - | Yes |
Related Speaker Comparisons
More top alternatives to MoFi SourcePoint 8:
- MoFi SourcePoint 8 vs March Audio Sointuva AWG
- MoFi SourcePoint 8 vs AsciLab C6B
- KEF R3 Meta vs MoFi SourcePoint 8
- KEF Q Concerto Meta vs MoFi SourcePoint 8
- MoFi SourcePoint 8 vs Wharfedale Aura 2
Prices on this page were last checked September 14, 2026 at 1:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
MoFi SourcePoint 8: $2594 per pair Crutchfield eBay
Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Measured bass extension of 52Hz (-3dB), with a measured sensitivity of 86.3dB.
Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Full MoFi SourcePoint 8 review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 28 lbs (12.7 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why Do People Love the MoFi SourcePoint 8? More from Erin’s Audio Corner →
- Erin’s Audio Corner Website MoFi SourcePoint 8
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- GR-Research: Danny Tackles Andrews Jones: The Source Point 8! Spoiler Alert (It’s Really Good) More from GR-Research →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- MoFi SourcePoint 8 vs KEF R3
- MoFi SourcePoint 8 vs Epos ES14N
- MoFi SourcePoint 8 vs Wharfedale Aura 2
- MoFi SourcePoint 8 vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs KEF R3 Meta
- MoFi SourcePoint 8 vs Wharfedale Super Linton
- MoFi SourcePoint 8 vs GR-Research NX-Bravo
- MoFi SourcePoint 8 vs MoFi SourcePoint 10
- See all 33 comparisons
JBL HDI-1600: $1980 per pair Discontinued Crutchfield eBay
Pros: CEA2034 spinorama is very flat in the critical mid-to-upper frequencies, with a slight bass boost that should have a good subjective effect and very smooth early-window directivity. Predicted in-room response in a simulated average listening room closely tracks the reviewer’s own preferred target curve. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 85dB.
Cons: A dip appears above 10kHz on-axis. Cumulative spectral decay (waterfall) shows some messiness around the crossover along with a 700Hz resonance. Harmonic distortion rises to nearly 2% right at the 1.9kHz crossover point at 96dB SPL/1m. Discontinued.
Full JBL HDI-1600 review and specifications →
| Bass Extension (-10dB) | 55Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 70Hz (measured, Audio Science Review) |
| Dimensions | 14.6"H x 9.1"W x 11.4"D (370.0 x 230.0 x 288.9 mm) |
| Discontinued | Yes |
| Drivers | 1" tweeter + 6.5" woofer |
| Impedance | 4 ohms nominal (measured, Audio Science Review) |
| Sensitivity | 85dB (2.83V/1m, measured, Audio Science Review) |
| Weight | 53.4 lbs (24.2 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- JBL HDI-1600 vs Aalto Speakers Aalto 3 Passive
- JBL HDI-1600 vs Arendal 1723 Bookshelf S THX
- JBL HDI-1600 vs Revel Concerta2 M16
- JBL HDI-1600 vs ELAC Debut 3.0 DB63
- JBL HDI-1600 vs Emotiva Airmotiv XB2
- JBL HDI-1600 vs ELAC VELA BS 403
- JBL HDI-1600 vs ELAC Uni-Fi Reference UBR62
- JBL HDI-1600 vs Revel M126Be
- See all 29 comparisons