Short answer: the GR-Research NX-Bravo if sound quality matters most, the Klipsch RP-600M II if price matters most. The GR-Research NX-Bravo ranks #25 of 130 bookshelf speakers at $1540. The Klipsch RP-600M II ranks #74 at $449.99, $1090.01 cheaper.
What the Klipsch RP-600M II offers: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Watch for: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
What the GR-Research NX-Bravo offers: Vertical dispersion is unusually wide for a two-way bookshelf: tonal matching holds from about 50° above the tweeter axis down to 20° below it, well beyond the roughly ±10-20° typical of most two-ways. Horizontal dispersion is also wide at about ±70° through the midrange, widening further when toed out, so sidewall acoustic treatment isn’t really necessary. Burst decay is extremely clean with essentially no ringing - the reviewer compared it favorably to a $13,000/pair speaker that showed significant ringing at 120Hz and 500Hz. A deliberate dip around 7kHz reduces sibilance while the 1-4kHz upper-midrange stays neutral, so the sound doesn’t come across as laid-back or recessed. Easy to drive electrically, with a 5-ohm minimum impedance and 2.5-ohm minimum EPDR. Available from $700 as a kit up to about $2,500 fully finished, with the option of the designer’s flush-mount tube/banana-plug terminals for a cleaner look. Watch for: Pointed straight on-axis there’s a deliberate ~5dB high-frequency bump meant to compensate for narrowing dispersion off-axis; it needs about 15° of toe-out (aimed to cross behind the listener) to sound balanced, which won’t suit every room layout. Higher-than-normal high-frequency distortion becomes audible in sine-sweep testing at higher output, and multitone distortion crosses the reviewer’s 3% threshold around 96dB, making roughly 88dB the safer output ceiling. SPL-limited by the manufacturer’s own admission - not intended for loud, full-range playback and best paired with a subwoofer, as with most two-way bookshelf designs. F3 of 77Hz and F10 of 45Hz mean bass only reaches about 50-60Hz in-room. A minor enclosure or port resonance shows up in the frequency response (though not in burst decay), likely a non-issue but visible in measurements. Adding a subwoofer reduces midrange distortion but doesn’t address the elevated high-frequency distortion.
Buy the Klipsch RP-600M II if the price is the priority over sound quality, or the GR-Research NX-Bravo if sound quality is the priority over the price.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Klipsch RP-600M II | GR-Research NX-Bravo | |
|---|---|---|
| Price | $449.99 per pair | $1540 per pair kit with finished cabinets (assembly required) |
| Ranked | #74 of 130 in Large Size Bookshelf Speakers | #25 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) | 45Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) | 77Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) | 14"H x 7.5"W x 11.5"D (355.6 x 190.5 x 292.1 mm) |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) | 6 ohms nominal, 5 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) | 84.8dB (measured, Erin's Audio Corner) |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn | GR-Research M165 6.5" paper cone, non-resonant polymer frame woofer, GR-Research Neo3 Planar Magnetic Ribbon deep rear cup tweeter |
| Weight | 13 lbs (5.9 kg) each | 16.1 lbs (7.3 kg) each |
| Woofer Cabinet | ported | ported |
| Spinorama Preference Score | 4.75 | 4.33 |
| Spinorama Preference Score with Perfect Sub | 6.88 | 6.67 |
Related Speaker Comparisons
How GR-Research NX-Bravo compares with other leading options:
- GR-Research NX-Bravo vs March Audio Sointuva AWG
- AsciLab C6B vs GR-Research NX-Bravo
- GR-Research NX-Bravo vs KEF R3 Meta
- GR-Research NX-Bravo vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs GR-Research NX-Bravo
Prices on this page were last checked September 14, 2026 at 1:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-600M II: $449.99 per pair Amazon eBay
Pros: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 86dB.
Cons: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
Full Klipsch RP-600M II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.75 |
| Spinorama Preference Score with Perfect Sub | 6.88 |
| Weight | 13 lbs (5.9 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: The Truth about Klipsch’s “NEW” Sound. RP-600M Update. More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Klipsch RP-600M II
- GR-Research: We Bought The "NEW" RP-600M II Is KLIPSCH Listening?! More from GR-Research →
- Erin’s Audio Corner: 5 AWESOME SPEAKERS Under $1000 You Won’t Regret
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Klipsch RP-600M II vs Dynaudio Emit 20
- Klipsch RP-600M II vs Philharmonic BMR Monitor
- Klipsch RP-600M II vs JBL Studio 630
- Klipsch RP-600M II vs Behringer B2030P
- Klipsch RP-600M II vs Ascend CBM-170 SE2
- Klipsch RP-600M II vs Infinity Reference R162
- Klipsch RP-600M II vs GR-Research X-LS Encore
- Klipsch RP-600M II vs Infinity IL10
- See all 72 comparisons
GR-Research NX-Bravo: $1540 per pair kit with finished cabinets (assembly required) Gr-research eBay
Pros: Vertical dispersion is unusually wide for a two-way bookshelf: tonal matching holds from about 50° above the tweeter axis down to 20° below it, well beyond the roughly ±10-20° typical of most two-ways. Horizontal dispersion is also wide at about ±70° through the midrange, widening further when toed out, so sidewall acoustic treatment isn’t really necessary. Burst decay is extremely clean with essentially no ringing - the reviewer compared it favorably to a $13,000/pair speaker that showed significant ringing at 120Hz and 500Hz. A deliberate dip around 7kHz reduces sibilance while the 1-4kHz upper-midrange stays neutral, so the sound doesn’t come across as laid-back or recessed. Easy to drive electrically, with a 5-ohm minimum impedance and 2.5-ohm minimum EPDR. Available from $700 as a kit up to about $2,500 fully finished, with the option of the designer’s flush-mount tube/banana-plug terminals for a cleaner look. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 84.8dB.
Cons: Pointed straight on-axis there’s a deliberate ~5dB high-frequency bump meant to compensate for narrowing dispersion off-axis; it needs about 15° of toe-out (aimed to cross behind the listener) to sound balanced, which won’t suit every room layout. Higher-than-normal high-frequency distortion becomes audible in sine-sweep testing at higher output, and multitone distortion crosses the reviewer’s 3% threshold around 96dB, making roughly 88dB the safer output ceiling. SPL-limited by the manufacturer’s own admission - not intended for loud, full-range playback and best paired with a subwoofer, as with most two-way bookshelf designs. F3 of 77Hz and F10 of 45Hz mean bass only reaches about 50-60Hz in-room. A minor enclosure or port resonance shows up in the frequency response (though not in burst decay), likely a non-issue but visible in measurements. Adding a subwoofer reduces midrange distortion but doesn’t address the elevated high-frequency distortion.
Full GR-Research NX-Bravo review and specifications →
| Bass Extension (-10dB) | 45Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) |
| Dimensions | 14"H x 7.5"W x 11.5"D (355.6 x 190.5 x 292.1 mm) |
| Drivers | GR-Research M165 6.5" paper cone, non-resonant polymer frame woofer, GR-Research Neo3 Planar Magnetic Ribbon deep rear cup tweeter |
| Impedance | 6 ohms nominal, 5 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 84.8dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.33 |
| Spinorama Preference Score with Perfect Sub | 6.67 |
| Weight | 16.1 lbs (7.3 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons