Short answer: the Dynaudio Emit 10, if you are buying new. The Dynaudio Emit M10 ranks higher than the JBL Control 1 Pro (#102 vs #145 of 160 bookshelf speakers) but is discontinued; its replacement, the Dynaudio Emit 10, is rated 3.2/5 at $599 and is still sold new.
The Dynaudio Emit M10 is the more accurate, deeper-bass option. CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. Its measured preference score, a predictor of how neutral it sounds, is 4.56 against 2.87 for the JBL Control 1 Pro. Its bass reaches about 60.1Hz before falling 3dB, against 78Hz for the JBL Control 1 Pro. The tradeoff: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange: the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t.
What the JBL Control 1 Pro does well: Magnetically shielded transducers and a rugged molded enclosure make it a durable choice for wall-mount or install use, with SonicGuard overload protection built into the crossover. Watch for: Sound power and predicted in-room response measurements are badly uneven compared to the JBL 305P Mark II tested alongside it, with no waveguide to control directivity as the woofer beams before handing off to the tweeter.
Buy the Dynaudio Emit 10, the replacement for the discontinued Dynaudio Emit M10; it is rated higher for sound quality than the JBL Control 1 Pro.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Dynaudio Emit M10 | JBL Control 1 Pro | |
|---|---|---|
| Price | $800 per pair Discontinued | $240 per pair |
| Ranked | #102 of 160 in Medium Size Bookshelf Speakers | #145 of 160 in Medium Size Bookshelf Speakers |
| Bass Extension (-3dB) | 60.1Hz (measured, Audio Science Review) | 78Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 46.8Hz (derived, log-interpolated between spinorama.org -9dB/-12dB points) | 55Hz (measured, Audio Science Review) |
| Sensitivity | 83.5dB (2.83V/1m, measured, Audio Science Review) | 87dB (2.83V/1m, measured, Audio Science Review) |
| Impedance | 6 ohms nominal | 4 ohms |
| Frequency Response | 50Hz - 23kHz (+/-3dB) (Manufacturer specified) | 80Hz - 20kHz -10dB (Manufacturer specified) |
| Drivers | 28mm soft dome tweeter, 14cm MSP mid/bass driver | 5.25” low frequency driver, 0.75” polycarbonate dome tweeter |
| Weight | 12.3 lbs (5.6 kg) each | 4 lbs (1.8 kg) each |
| Dimensions | 11.5”H x 6.7”W x 9.4”D (292 x 170 x 240 mm) | 9.3H x 6.3W x 5.6D in |
| Woofer Cabinet | ported | sealed |
| Spinorama Preference Score | 4.56 (spinorama.org) | 2.87 |
| Spinorama Preference Score with Perfect Sub | 6.93 (spinorama.org) | 6.37 |
| DIY Kit | No | No |
| Power Handling | - | 150W |
Related Speaker Comparisons
How Dynaudio Emit M10 compares with other leading options:
- Dynaudio Emit M10 vs Audio First Fidelia
- Dynaudio Emit M10 vs Philharmonic Ceramic Mini
- Dynaudio Emit M10 vs Ascend Sierra 1 v2
- KEF LS50 Meta vs Dynaudio Emit M10
- XMechanik Mechano23 DIY vs Dynaudio Emit M10
Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Dynaudio Emit M10: $800 per pair Discontinued eBay
Newer model: the Dynaudio Emit 10, ranked higher, estimated 3.2/5.
Pros: CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. 28mm soft dome tweeter and 14cm MSP mid/bass driver. Measured bass extension of 60.1Hz (-3dB), with a measured sensitivity of 83.5dB.
Cons: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange: the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t. His verdict: cheaper speakers deliver much more balanced tonality, so he wouldn’t buy it for himself. Discontinued.
Full Dynaudio Emit M10 review and specifications →
| Bass Extension (-10dB) | 46.8Hz (derived, log-interpolated between spinorama.org -9dB/-12dB points) |
|---|---|
| Bass Extension (-3dB) | 60.1Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 11.5”H x 6.7”W x 9.4”D (292 x 170 x 240 mm) |
| Drivers | 28mm soft dome tweeter, 14cm MSP mid/bass driver |
| Frequency Response | 50Hz - 23kHz (+/-3dB) (Manufacturer specified) |
| Impedance | 6 ohms nominal |
| Sensitivity | 83.5dB (2.83V/1m, measured, Audio Science Review) |
| Spinorama Preference Score | 4.56 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 6.93 (spinorama.org) |
| Weight | 12.3 lbs (5.6 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit M10 vs ELAC BS U5
- Dynaudio Emit M10 vs Dynaudio X14
- Dynaudio Emit M10 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
- Dynaudio Emit M10 vs JBL Stage 250B
- Dynaudio Emit M10 vs Paradigm Monitor SE Atom
- Dynaudio Emit M10 vs Sony SS-CS5 M2
- Dynaudio Emit M10 vs ELAC Debut 2.0 B5.2
- Dynaudio Emit M10 vs JBL L52 Classic
- See all 38 comparisons
JBL Control 1 Pro: $240 per pair Parts Express eBay
Pros: Magnetically shielded transducers and a rugged molded enclosure make it a durable choice for wall-mount or install use, with SonicGuard overload protection built into the crossover. Feels solidly built despite the low price, and the professional crossover network uses steep slopes. Measured bass extension of 78Hz (-3dB), with a measured sensitivity of 87dB.
Cons: Sound power and predicted in-room response measurements are badly uneven compared to the JBL 305P Mark II tested alongside it, with no waveguide to control directivity as the woofer beams before handing off to the tweeter. The reviewer performed no distortion or dedicated listening test on this unit and concluded he didn’t “think there is a reason to purchase it” over a proper studio monitor at a similar price.
Full JBL Control 1 Pro review and specifications →
| Bass Extension (-10dB) | 55Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 78Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 9.3H x 6.3W x 5.6D in |
| Drivers | 5.25” low frequency driver, 0.75” polycarbonate dome tweeter |
| Frequency Response | 80Hz - 20kHz -10dB (Manufacturer specified) |
| Impedance | 4 ohms |
| Power Handling | 150W |
| Sensitivity | 87dB (2.83V/1m, measured, Audio Science Review) |
| Spinorama Preference Score | 2.87 |
| Spinorama Preference Score with Perfect Sub | 6.37 |
| Weight | 4 lbs (1.8 kg) each |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- JBL Control 1 Pro vs Polk T15
- JBL Control 1 Pro vs Fluance Signature HFS
- JBL Control 1 Pro vs JBL Stage A130
- JBL Control 1 Pro vs Definitive Technology ProMonitor 1000
- JBL Control 1 Pro vs Q Acoustics 5020
- JBL Control 1 Pro vs Pioneer Elite SP-EBS73-LR
- JBL Control 1 Pro vs Micca RB42
- JBL Control 1 Pro vs Q Acoustics 3020i
- See all 31 comparisons