KEF LS60 Specifications and Review

Last updated: August 19, 2026

The KEF LS60 ranks #1 out of 3 total Large Size Powered Floorstanding Speakers for sound quality. See Top Recommended Speakers By Attribute for all the top speaker suggestions.

Brand: KEF

Prices on this page were last checked August 21, 2026 at 5:30 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1 KEF LS60: $5,999.99 Amazon Crutchfield eBay

Pros: Four 5.25” force-cancelling midwoofers (two per side) paired with a single concentric Uni-Q mid/tweeter (4” mid, 3/4” tweeter) for a true point-source above the bass. Extremely flat response, holding within about ±3dB from 20Hz to 20kHz in Extended mode. Horizontal directivity stays close to ±60° at the -6dB point and vertical directivity to about ±40°, with off-axis trend lines barely deviating from the on-axis curve even at 30° - unusually consistent tonality whether seated or standing. Distortion at both 86dB and 96dB/1m is dominated by second-order harmonics with third-order distortion very low; high-passing at 80Hz for a subwoofer barely changes the midrange distortion, pointing to a clean woofer motor. Extensive built-in connectivity (HDMI, TOSLINK, digital coax, analog RCA) plus onboard streaming (Spotify, Amazon Music, Deezer, Qobuz).

Cons: Coincident driver design produces an on-axis diffraction dip around 9-10kHz (about 4-5dB) that can dull shimmer on cymbals and shakers; needs roughly 10-20° of toe-out to smooth it and widen the stereo image. DSP limiting caps real-world output well under KEF’s claimed 111dB max SPL spec - measured closer to 99-102dB at 1 meter per speaker - and bass extension (F3 around 23Hz in Extended mode) shrinks at the loudest levels to protect the drivers. Small bass bump in Extended mode (roughly 1-2dB around 100Hz plus a 1.5-2dB shelf near 200Hz) that typically needs the app’s Wall Mode or placement changes to tame. Only basic bass/treble sliders and Wall Mode presets are available - no true parametric EQ bands for dialing out specific room modes. Each speaker weighs about 70-72 lbs, making solo stand-mounting awkward.

How it compares: Just below it: Buchardt A700 - $600 more, 100W less output power.

AppYes (KEF Connect)
Bass Extension (-10dB)<20Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)23Hz (measured, Erin's Audio Corner)
BluetoothYes (5.0 with SBC, AAC)
DSPYes (Music Integrity Engine)
Dimensions42.9"H x 8.3"W x 15.5"D (1089.7 x 210.8 x 393.7 mm)
Drivers4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver: woofers, 100 mm (4in.) aluminium cone midrange, 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology tweeter
EQYes (Normal and Expert modes, room adaptation)
Frequency Response31Hz - 24kHz (±3dB) (Manufacturer specified)
InputsWifi, Optical, Digital coaxial, RCA, HDMI, Ethernet
Max SPL111dB @ 1m (pink noise)
Output Power700W (500W LF Class D + 100W MF Class D + 100W HF Class AB)
OutputsSubwoofer RCA
Sensitivity97.7dB (measured at 0.3V/1m, Erin's Audio Corner)
Streaming ServicesYes (AirPlay 2, Chromecast, Roon Ready, Spotify Connect, Tidal Connect, Amazon Music, Qobuz, Deezer)
Weight69 lbs / 31.3 kg each
WifiYes (dual-band)

More KEF speakers →