Short answer: these are built for different rigs. They rank #6 and #7 of 19 10-inch PA speakers, but the NuQ102 is a passive coaxial cabinet for installers running their own amp racks, while the KX 10-A is a fully self-powered active speaker with a $2268.50 higher price to match.
The NuQ102 is passive and flexible on amplification. Its coaxial point-source design gives symmetric 100° x 60° coverage, and needing an external amplifier and crossover keeps DSP and power choices in the installer’s hands. Even on low-quality vendor data it still returns a 5.0 ideal-subwoofer preference score with 63Hz measured extension, though its 124dB peak claim trails every active speaker in this size class since it has no amplifier of its own to push output higher.
The KX 10-A is RCF’s entry point into its flagship KX point-source range. It is fully active, with a neodymium woofer, a claimed 130dB peak, and RCF’s FiRPHASE processing, Bass Motion Control and onboard presets, plus RDNet networked control over EtherCON. Coverage is a wider 100° x 50° pattern in a 15.5kg cabinet, but the local measurement is truncated and cannot produce a preference score, so its exact tonal balance is not yet independently confirmed the way the NuQ102’s is.
Buy the NuQ102 if you are wiring a fixed install with your own amplification and want passive flexibility and wide coaxial coverage.
Buy the KX 10-A if you want a self-contained, high-output active speaker with networked control and RCF’s flagship processing built in.
Specifications Side By Side
| Turbosound NuQ102 | RCF KX 10-A | |
|---|---|---|
| Price | $530.00 | $2,798.50 |
| Ranked | #6 of 19 in 10-Inch Two-Way Powered PA Speakers | #7 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Passive 2-way coaxial PA speaker | Active 2-way bass-reflex point-source PA speaker |
| Drivers | 10" coaxial woofer, compression driver | 10" neodymium woofer, compression driver |
| Frequency Response | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) | 60Hz - 20kHz (manufacturer specified) |
| Dimensions | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) | 20.1"H x 11.8"W x 17.5"D (510 x 300 x 445 mm) |
| Inputs | Two Neutrik speakON NL4 connectors | XLR and EtherCON RDNet input/link |
| Power Handling | 300W continuous / 1,200W peak (IEC, manufacturer specified) | - |
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating | 2000W peak (1400W LF + 600W HF) |
| Cabinet Material | 12mm birch plywood | Baltic birch plywood |
| Rigging | Eight M10, three M8 and four M6 fly points | M10 inserts; 35mm pole mount |
| Coverage | 100° x 60° | 100° x 50° |
| Maximum SPL | 124dB peak (manufacturer specified) | 130dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No | No |
| Weight | 28 lbs / 12.7 kg | 34.2 lbs / 15.5 kg |
| Crossover Frequency | - | 1600Hz |
| Network Control | - | RDNet |
| DSP | - | Yes, FiRPHASE, Bass Motion Control and presets |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- HK Audio LINEAR 9 110 XA vs LD Systems Stinger 10-A-G3
- HK Audio LINEAR 7 110 XA vs LD Systems Stinger 10-A-G3
- Yamaha DXR10mkIII vs Vue Audiotechnik A-10
- RCF KX 10-A vs Yamaha DXR10mkII
- RCF KX 10-A vs Yamaha DXR10mkIII
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Turbosound NuQ102: $530.00 B&H Photo Video eBay
Pros: Low-quality vendor data still shows a 5.0 ideal-subwoofer preference score with 63Hz measured extension. The coaxial point-source design gives symmetric 100° x 60° coverage, and being passive keeps amplification and DSP choices flexible for installers.
Cons: Being passive, it needs an external amplifier and crossover to work at all, and its 124dB peak claim trails every active speaker in this ranking.
Full Turbosound NuQ102 review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm birch plywood |
| Configuration | Passive 2-way coaxial PA speaker |
| Coverage | 100° x 60° |
| Dimensions | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) |
| Drivers | 10" coaxial woofer, compression driver |
| Frequency Response | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) |
| Inputs | Two Neutrik speakON NL4 connectors |
| Maximum SPL | 124dB peak (manufacturer specified) |
| Power Handling | 300W continuous / 1,200W peak (IEC, manufacturer specified) |
| Rigging | Eight M10, three M8 and four M6 fly points |
| Weight | 28 lbs / 12.7 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF KX 10-A: $2,798.50 B&H Photo Video Guitar Center eBay
Pros: The entry point into RCF’s flagship KX point-source range, with a 130dB claimed peak, a neodymium woofer and wide 100° x 50° coverage in a manageable 15.5kg cabinet.
Cons: The local measurement is truncated and cannot produce a preference score, and pricing/retail availability are not yet well established for this model.
Full RCF KX 10-A review and specifications →
| Amplifier Power | 2000W peak (1400W LF + 600W HF) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Baltic birch plywood |
| Configuration | Active 2-way bass-reflex point-source PA speaker |
| Coverage | 100° x 50° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE, Bass Motion Control and presets |
| Dimensions | 20.1"H x 11.8"W x 17.5"D (510 x 300 x 445 mm) |
| Drivers | 10" neodymium woofer, compression driver |
| Frequency Response | 60Hz - 20kHz (manufacturer specified) |
| Inputs | XLR and EtherCON RDNet input/link |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Network Control | RDNet |
| Rigging | M10 inserts; 35mm pole mount |
| Weight | 34.2 lbs / 15.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons