Short answer: the Stinger 10-A-G3 unless you specifically need a passive coaxial box. These rank #5 and #6 out of 19 10-inch powered PA speakers, priced at $749 and $530.
The Stinger 10-A-G3 is active and light. Medium-quality vendor data returns a 5.13 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box, and at 12.7kg it is one of the lightest active speakers in this ranking. Its cons are the usual budget tradeoffs: a 127dB peak claim that’s modest next to higher-output rivals, and a 90° x 50° horn on the narrower side.
The NuQ102 is passive and coaxial. It needs an external amplifier and crossover to work at all, and its 124dB peak claim trails every active speaker in this ranking, both flagged directly in its own cons. In exchange, low-quality vendor data still shows a 5.0 ideal-subwoofer preference score with 63Hz measured extension, and the coaxial point-source design gives symmetric 100° x 60° coverage while keeping amplification and DSP choices flexible for installers.
Buy the Stinger 10-A-G3 for a self-contained, easy-to-carry active speaker with strong measured bass for its price.
Buy the NuQ102 if you’re building a passive, amplifier-driven system and want the coaxial box’s symmetric coverage pattern.
Specifications Side By Side
| LD Systems Stinger 10-A-G3 | Turbosound NuQ102 | |
|---|---|---|
| Price | $749.00 | $530.00 |
| Ranked | #5 of 19 in 10-Inch Two-Way Powered PA Speakers | #6 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Passive 2-way coaxial PA speaker |
| Drivers | 10" woofer, 1" compression driver | 10" coaxial woofer, compression driver |
| Frequency Response | 65Hz - 20kHz (manufacturer specified) | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) |
| Dimensions | 20.7"H x 12.8"W x 12.1"D (527 x 325 x 308 mm) | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) |
| Inputs | 2 x XLR/TRS line/mic inputs; XLR mono mix output | Two Neutrik speakON NL4 connectors |
| Amplifier Power | 600W peak / 300W RMS | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating |
| Cabinet Material | 12mm plywood with polyurea coating | 12mm birch plywood |
| Rigging | M10 suspension points; 36mm Dual-Tilt pole mount | Eight M10, three M8 and four M6 fly points |
| Coverage | 90° x 50° | 100° x 60° |
| Maximum SPL | 127dB peak (manufacturer specified) | 124dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) | 69Hz (measured, vendor Spinorama data) |
| DSP | Yes | - |
| Bluetooth | No | No |
| Weight | 28 lbs / 12.7 kg | 28 lbs / 12.7 kg |
| Power Handling | - | 300W continuous / 1,200W peak (IEC, manufacturer specified) |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- LD Systems DDQ10 vs HK Audio LINEAR 9 110 XA
- RCF KX 10-A vs Yamaha DXR10mkII
- RCF KX 10-A vs Yamaha DXR10mkIII
- Turbosound NuQ102 vs Yamaha DXR10mkIII
- LD Systems DDQ10 vs LD Systems Stinger 10-A-G3
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
LD Systems Stinger 10-A-G3: $749.00 Amazon B&H Photo Video eBay
Pros: Medium-quality vendor data returns a 5.13 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box. At 12.7kg it is one of the lightest active speakers in this ranking.
Cons: Its 127dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.
Full LD Systems Stinger 10-A-G3 review and specifications →
| Amplifier Power | 600W peak / 300W RMS |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm plywood with polyurea coating |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 50° |
| DSP | Yes |
| Dimensions | 20.7"H x 12.8"W x 12.1"D (527 x 325 x 308 mm) |
| Drivers | 10" woofer, 1" compression driver |
| Frequency Response | 65Hz - 20kHz (manufacturer specified) |
| Inputs | 2 x XLR/TRS line/mic inputs; XLR mono mix output |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Rigging | M10 suspension points; 36mm Dual-Tilt pole mount |
| Weight | 28 lbs / 12.7 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Turbosound NuQ102: $530.00 B&H Photo Video eBay
Pros: Low-quality vendor data still shows a 5.0 ideal-subwoofer preference score with 63Hz measured extension. The coaxial point-source design gives symmetric 100° x 60° coverage, and being passive keeps amplification and DSP choices flexible for installers.
Cons: Being passive, it needs an external amplifier and crossover to work at all, and its 124dB peak claim trails every active speaker in this ranking.
Full Turbosound NuQ102 review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm birch plywood |
| Configuration | Passive 2-way coaxial PA speaker |
| Coverage | 100° x 60° |
| Dimensions | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) |
| Drivers | 10" coaxial woofer, compression driver |
| Frequency Response | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) |
| Inputs | Two Neutrik speakON NL4 connectors |
| Maximum SPL | 124dB peak (manufacturer specified) |
| Power Handling | 300W continuous / 1,200W peak (IEC, manufacturer specified) |
| Rigging | Eight M10, three M8 and four M6 fly points |
| Weight | 28 lbs / 12.7 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons